[PATCH 6/7] PWM: rockchip: add driver support
Ahmad Fatoum
a.fatoum at pengutronix.de
Sun Apr 14 22:35:59 PDT 2024
Import the Linux v6.8 state of the driver to enable barebox control of PWM
LEDs and other peripherals.
This has been tested on the RK3566.
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
drivers/pwm/Kconfig | 7 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-rockchip.c | 348 +++++++++++++++++++++++++++++++++++++
3 files changed, 356 insertions(+)
create mode 100644 drivers/pwm/pwm-rockchip.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 0b12278e80e7..eb04f92c6f35 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -42,4 +42,11 @@ config PWM_STM32
help
This enables PWM support for STM32 MCUs and MPUs.
+config PWM_ROCKCHIP
+ tristate "Rockchip PWM support"
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
+ help
+ Generic PWM framework driver for the PWM controller found on
+ Rockchip SoCs.
+
endif
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 9c3b10ae313b..4adc083e6c95 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
obj-$(CONFIG_PWM_IMX) += pwm-imx.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_STM32) += pwm-stm32.o
+obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o
diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
new file mode 100644
index 000000000000..960867c52066
--- /dev/null
+++ b/drivers/pwm/pwm-rockchip.c
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PWM driver for Rockchip SoCs
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani at gmail.com>
+ * Copyright (C) 2014 ROCKCHIP, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <module.h>
+#include <of.h>
+#include <linux/device.h>
+#include <pwm.h>
+#include <linux/time.h>
+
+#define PWM_CTRL_TIMER_EN (1 << 0)
+#define PWM_CTRL_OUTPUT_EN (1 << 3)
+
+#define PWM_ENABLE (1 << 0)
+#define PWM_CONTINUOUS (1 << 1)
+#define PWM_DUTY_POSITIVE (1 << 3)
+#define PWM_DUTY_NEGATIVE (0 << 3)
+#define PWM_INACTIVE_NEGATIVE (0 << 4)
+#define PWM_INACTIVE_POSITIVE (1 << 4)
+#define PWM_POLARITY_MASK (PWM_DUTY_POSITIVE | PWM_INACTIVE_POSITIVE)
+#define PWM_OUTPUT_LEFT (0 << 5)
+#define PWM_LOCK_EN (1 << 6)
+#define PWM_LP_DISABLE (0 << 8)
+
+struct rockchip_pwm_chip {
+ struct pwm_chip chip;
+ struct clk *clk;
+ struct clk *pclk;
+ const struct rockchip_pwm_data *data;
+ void __iomem *base;
+};
+
+struct rockchip_pwm_regs {
+ unsigned long duty;
+ unsigned long period;
+ unsigned long cntr;
+ unsigned long ctrl;
+};
+
+struct rockchip_pwm_data {
+ struct rockchip_pwm_regs regs;
+ unsigned int prescaler;
+ bool supports_polarity;
+ bool supports_lock;
+ u32 enable_conf;
+};
+
+static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct rockchip_pwm_chip, chip);
+}
+
+static void rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+ unsigned long period, duty;
+ u64 clk_rate, div;
+ u32 ctrl;
+
+ clk_rate = clk_get_rate(pc->clk);
+
+ /*
+ * Since period and duty cycle registers have a width of 32
+ * bits, every possible input period can be obtained using the
+ * default prescaler value for all practical clock rate values.
+ */
+ div = clk_rate * state->period;
+ period = DIV_ROUND_CLOSEST_ULL(div,
+ pc->data->prescaler * NSEC_PER_SEC);
+
+ div = clk_rate * state->duty_cycle;
+ duty = DIV_ROUND_CLOSEST_ULL(div, pc->data->prescaler * NSEC_PER_SEC);
+
+ /*
+ * Lock the period and duty of previous configuration, then
+ * change the duty and period, that would not be effective.
+ */
+ ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
+ if (pc->data->supports_lock) {
+ ctrl |= PWM_LOCK_EN;
+ writel_relaxed(ctrl, pc->base + pc->data->regs.ctrl);
+ }
+
+ writel(period, pc->base + pc->data->regs.period);
+ writel(duty, pc->base + pc->data->regs.duty);
+
+ if (pc->data->supports_polarity) {
+ ctrl &= ~PWM_POLARITY_MASK;
+ if (state->polarity == PWM_POLARITY_INVERSED)
+ ctrl |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
+ else
+ ctrl |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
+ }
+
+ /*
+ * Unlock and set polarity at the same time,
+ * the configuration of duty, period and polarity
+ * would be effective together at next period.
+ */
+ if (pc->data->supports_lock)
+ ctrl &= ~PWM_LOCK_EN;
+
+ writel(ctrl, pc->base + pc->data->regs.ctrl);
+}
+
+static int rockchip_pwm_enable(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ bool enable)
+{
+ struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+ u32 enable_conf = pc->data->enable_conf;
+ int ret;
+ u32 val;
+
+ if (enable) {
+ ret = clk_enable(pc->clk);
+ if (ret)
+ return ret;
+ }
+
+ val = readl_relaxed(pc->base + pc->data->regs.ctrl);
+
+ if (enable)
+ val |= enable_conf;
+ else
+ val &= ~enable_conf;
+
+ writel_relaxed(val, pc->base + pc->data->regs.ctrl);
+
+ if (!enable)
+ clk_disable(pc->clk);
+
+ return 0;
+}
+
+static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+ struct pwm_state curstate;
+ bool enabled;
+ int ret = 0;
+
+ ret = clk_enable(pc->pclk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(pc->clk);
+ if (ret)
+ return ret;
+
+ pwm_get_state(pwm, &curstate);
+ enabled = curstate.enabled;
+
+ if (state->polarity != curstate.polarity && enabled &&
+ !pc->data->supports_lock) {
+ ret = rockchip_pwm_enable(chip, pwm, false);
+ if (ret)
+ goto out;
+ enabled = false;
+ }
+
+ rockchip_pwm_config(chip, pwm, state);
+ if (state->enabled != enabled) {
+ ret = rockchip_pwm_enable(chip, pwm, state->enabled);
+ if (ret)
+ goto out;
+ }
+
+out:
+ clk_disable(pc->clk);
+ clk_disable(pc->pclk);
+
+ return ret;
+}
+
+static const struct pwm_ops rockchip_pwm_ops = {
+ .apply = rockchip_pwm_apply,
+};
+
+static const struct rockchip_pwm_data pwm_data_v1 = {
+ .regs = {
+ .duty = 0x04,
+ .period = 0x08,
+ .cntr = 0x00,
+ .ctrl = 0x0c,
+ },
+ .prescaler = 2,
+ .supports_polarity = false,
+ .supports_lock = false,
+ .enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN,
+};
+
+static const struct rockchip_pwm_data pwm_data_v2 = {
+ .regs = {
+ .duty = 0x08,
+ .period = 0x04,
+ .cntr = 0x00,
+ .ctrl = 0x0c,
+ },
+ .prescaler = 1,
+ .supports_polarity = true,
+ .supports_lock = false,
+ .enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
+ PWM_CONTINUOUS,
+};
+
+static const struct rockchip_pwm_data pwm_data_vop = {
+ .regs = {
+ .duty = 0x08,
+ .period = 0x04,
+ .cntr = 0x0c,
+ .ctrl = 0x00,
+ },
+ .prescaler = 1,
+ .supports_polarity = true,
+ .supports_lock = false,
+ .enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
+ PWM_CONTINUOUS,
+};
+
+static const struct rockchip_pwm_data pwm_data_v3 = {
+ .regs = {
+ .duty = 0x08,
+ .period = 0x04,
+ .cntr = 0x00,
+ .ctrl = 0x0c,
+ },
+ .prescaler = 1,
+ .supports_polarity = true,
+ .supports_lock = true,
+ .enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
+ PWM_CONTINUOUS,
+};
+
+static const struct of_device_id rockchip_pwm_dt_ids[] = {
+ { .compatible = "rockchip,rk2928-pwm", .data = &pwm_data_v1},
+ { .compatible = "rockchip,rk3288-pwm", .data = &pwm_data_v2},
+ { .compatible = "rockchip,vop-pwm", .data = &pwm_data_vop},
+ { .compatible = "rockchip,rk3328-pwm", .data = &pwm_data_v3},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rockchip_pwm_dt_ids);
+
+static int rockchip_pwm_probe(struct device *dev)
+{
+ struct rockchip_pwm_chip *pc;
+ u32 enable_conf, ctrl;
+ bool enabled;
+ int ret, count;
+
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ pc->base = dev_platform_ioremap_resource(dev, 0);
+ if (IS_ERR(pc->base))
+ return PTR_ERR(pc->base);
+
+ pc->clk = clk_get(dev, "pwm");
+ if (IS_ERR(pc->clk)) {
+ pc->clk = clk_get(dev, NULL);
+ if (IS_ERR(pc->clk))
+ return dev_err_probe(dev, PTR_ERR(pc->clk),
+ "Can't get PWM clk\n");
+ }
+
+ count = of_count_phandle_with_args(dev->of_node,
+ "clocks", "#clock-cells");
+ if (count == 2)
+ pc->pclk = clk_get(dev, "pclk");
+ else
+ pc->pclk = pc->clk;
+
+ if (IS_ERR(pc->pclk))
+ return dev_err_probe(dev, PTR_ERR(pc->pclk), "Can't get APB clk\n");
+
+ ret = clk_prepare_enable(pc->clk);
+ if (ret)
+ return dev_err_probe(dev, ret, "Can't prepare enable PWM clk\n");
+
+ ret = clk_prepare_enable(pc->pclk);
+ if (ret) {
+ dev_err_probe(dev, ret, "Can't prepare enable APB clk\n");
+ goto err_clk;
+ }
+
+ dev->priv = pc;
+
+ pc->data = device_get_match_data(dev);
+ pc->chip.dev = dev;
+ pc->chip.ops = &rockchip_pwm_ops;
+
+ enable_conf = pc->data->enable_conf;
+ ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
+ enabled = (ctrl & enable_conf) == enable_conf;
+
+ pc->chip.devname = of_alias_get(dev->of_node);
+ if (!pc->chip.devname)
+ pc->chip.devname = basprintf("pwm_%p", pc->base);
+
+ ret = pwmchip_add(&pc->chip);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "pwmchip_add() failed\n");
+ goto err_pclk;
+ }
+
+ /* Keep the PWM clk enabled if the PWM appears to be up and running. */
+ if (!enabled)
+ clk_disable(pc->clk);
+
+ clk_disable(pc->pclk);
+
+ return 0;
+
+err_pclk:
+ clk_disable_unprepare(pc->pclk);
+err_clk:
+ clk_disable_unprepare(pc->clk);
+
+ return ret;
+}
+
+static void rockchip_pwm_remove(struct device *dev)
+{
+ struct rockchip_pwm_chip *pc = dev->priv;
+
+ pwmchip_remove(&pc->chip);
+}
+
+static struct driver rockchip_pwm_driver = {
+ .name = "rockchip-pwm",
+ .of_match_table = rockchip_pwm_dt_ids,
+ .probe = rockchip_pwm_probe,
+ .remove = rockchip_pwm_remove,
+};
+device_platform_driver(rockchip_pwm_driver);
+
+MODULE_AUTHOR("Beniamino Galvani <b.galvani at gmail.com>");
+MODULE_DESCRIPTION("Rockchip SoC PWM driver");
+MODULE_LICENSE("GPL v2");
--
2.39.2
More information about the barebox
mailing list