[PATCH v2 2/2] arm: boards: Add support for protonic-mecsbc board
Sascha Hauer
s.hauer at pengutronix.de
Thu Apr 4 04:15:27 PDT 2024
From: David Jander <david at protonic.nl>
MECSBC is a single-board-computer manufactured by Protonic Holland used in
blood analysis machines manufactured by RR-Mechatronics.
Signed-off-by: David Jander <david at protonic.nl>
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
Notes:
Changes since v1:
- Use aiochannel_name_get_value() helper
- some code refactoring
Documentation/boards/rockchip.rst | 1 +
arch/arm/boards/Makefile | 1 +
arch/arm/boards/protonic-mecsbc/Makefile | 3 +
arch/arm/boards/protonic-mecsbc/board.c | 159 +++++
arch/arm/boards/protonic-mecsbc/lowlevel.c | 33 +
arch/arm/configs/rockchip_v8_defconfig | 4 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3568-mecsbc-linux.dts | 704 +++++++++++++++++++++
arch/arm/dts/rk3568-mecsbc.dts | 147 +++++
arch/arm/mach-rockchip/Kconfig | 6 +
images/Makefile.rockchip | 1 +
11 files changed, 1060 insertions(+)
create mode 100644 arch/arm/boards/protonic-mecsbc/Makefile
create mode 100644 arch/arm/boards/protonic-mecsbc/board.c
create mode 100644 arch/arm/boards/protonic-mecsbc/lowlevel.c
create mode 100644 arch/arm/dts/rk3568-mecsbc-linux.dts
create mode 100644 arch/arm/dts/rk3568-mecsbc.dts
diff --git a/Documentation/boards/rockchip.rst b/Documentation/boards/rockchip.rst
index 583b4f1720..aa2febc8eb 100644
--- a/Documentation/boards/rockchip.rst
+++ b/Documentation/boards/rockchip.rst
@@ -61,6 +61,7 @@ Supported Boards
- Pine64 Quartz64 Model A
- Radxa ROCK3 Model A
- Radxa CM3 (RK3566) IO Board
+- Protonic MECSBC
The steps described in the following target the RK3568 and the RK3568 EVB but
generally apply to both SoCs and all boards.
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 05fbcca175..84e777092d 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -109,6 +109,7 @@ obj-$(CONFIG_MACH_PM9G45) += pm9g45/
obj-$(CONFIG_MACH_POLYHEX_DEBIX) += polyhex-debix/
obj-$(CONFIG_MACH_PROTONIC_IMX6) += protonic-imx6/
obj-$(CONFIG_MACH_PROTONIC_IMX8M) += protonic-imx8m/
+obj-$(CONFIG_MACH_PROTONIC_MECSBC) += protonic-mecsbc/
obj-$(CONFIG_MACH_PROTONIC_STM32MP1) += protonic-stm32mp1/
obj-$(CONFIG_MACH_QIL_A9260) += qil-a926x/
obj-$(CONFIG_MACH_QIL_A9G20) += qil-a926x/
diff --git a/arch/arm/boards/protonic-mecsbc/Makefile b/arch/arm/boards/protonic-mecsbc/Makefile
new file mode 100644
index 0000000000..b37b6c870b
--- /dev/null
+++ b/arch/arm/boards/protonic-mecsbc/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += board.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/protonic-mecsbc/board.c b/arch/arm/boards/protonic-mecsbc/board.c
new file mode 100644
index 0000000000..3ba8fb8d1c
--- /dev/null
+++ b/arch/arm/boards/protonic-mecsbc/board.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) "MECSBC: " fmt
+
+#include <bootsource.h>
+#include <common.h>
+#include <deep-probe.h>
+#include <init.h>
+#include <mach/rockchip/bbu.h>
+#include <environment.h>
+#include <param.h>
+#include <of_device.h>
+#include <aiodev.h>
+#include <globalvar.h>
+
+struct mecsbc_model {
+ const char *name;
+ const char *shortname;
+};
+
+struct mecsbc_priv {
+ int hw_id;
+ int hw_rev;
+};
+
+static struct mecsbc_priv mecsbc_data;
+
+static int saradc_get_value(const char *chan)
+{
+ int ret, voltage;
+
+ ret = aiochannel_name_get_value(chan, &voltage);
+ if (ret) {
+ pr_warn_once("Cannot read ADC %s: %pe\n", chan, ERR_PTR(ret));
+ return 0;
+ }
+
+ return voltage;
+}
+
+static int mecsbc_get_vin_mv(void)
+{
+ return saradc_get_value("aiodev0.in_value2_mV") * 22;
+}
+
+static bool mecsbc_get_usb_boot(void)
+{
+ return saradc_get_value("aiodev0.in_value0_mV") < 74;
+}
+
+static int mecsbc_adc_id_values[] = {
+ 1800, 1662, 1521, 1354, 1214, 1059, 900, 742, 335, 589, 278, 137, 0
+};
+
+static int mecsbc_get_adc_id(const char *chan)
+{
+ int val;
+ unsigned int t;
+
+ val = saradc_get_value(chan) + 74;
+
+ for (t = 0; t < ARRAY_SIZE(mecsbc_adc_id_values); t++) {
+ if (val > mecsbc_adc_id_values[t])
+ return t;
+ }
+
+ return t;
+}
+
+static void mecsbc_process_adc(struct device *dev)
+{
+ mecsbc_data.hw_id = mecsbc_get_adc_id("aiodev0.in_value1_mV");
+ mecsbc_data.hw_rev = mecsbc_get_adc_id("aiodev0.in_value3_mV");
+
+ dev_add_param_uint32_ro(dev, "boardrev", &mecsbc_data.hw_rev, "%u");
+ dev_add_param_uint32_ro(dev, "boardid", &mecsbc_data.hw_id, "%u");
+
+ /* Check if we need to enable the USB gadget instead of booting */
+ if (mecsbc_get_usb_boot()) {
+ globalvar_add_simple("boot.default", "net");
+ globalvar_add_simple("usbgadget.acm", "1");
+ globalvar_add_simple("usbgadget.autostart", "1");
+ globalvar_add_simple("system.partitions", "/dev/mmc0(mmc0)");
+ pr_info("MECSBC: Enter USB recovery\n");
+ } else {
+ globalvar_add_simple("boot.default", "bootchooser");
+ }
+
+ pr_info("Board id: %d, revision %d\n", mecsbc_data.hw_id, mecsbc_data.hw_rev);
+ pr_info("VIN = %d V\n", mecsbc_get_vin_mv() / 1000);
+}
+
+static int mecsbc_of_fixup_hwrev(struct device *dev)
+{
+ const char *compat;
+ char *buf;
+
+ compat = of_device_get_match_compatible(dev);
+
+ buf = xasprintf("%s-m%u-r%u", compat, mecsbc_data.hw_id,
+ mecsbc_data.hw_rev);
+ barebox_set_of_machine_compatible(buf);
+
+ free(buf);
+
+ return 0;
+}
+
+static int mecsbc_probe(struct device *dev)
+{
+ int ret = 0;
+ enum bootsource bootsource = bootsource_get();
+ int instance = bootsource_get_instance();
+ const struct mecsbc_model *model;
+ struct device_node *np;
+
+ np = of_find_node_by_name_address(NULL, "saradc at fe720000");
+ of_device_ensure_probed(np);
+
+ model = device_get_match_data(dev);
+
+ barebox_set_model(model->name);
+ barebox_set_hostname(model->shortname);
+
+ if (bootsource == BOOTSOURCE_MMC && instance == 1)
+ of_device_enable_path("/chosen/environment-sd");
+ else
+ of_device_enable_path("/chosen/environment-emmc");
+
+ rk3568_bbu_mmc_register("emmc", BBU_HANDLER_FLAG_DEFAULT, "/dev/mmc0");
+ rk3568_bbu_mmc_register("sd", 0, "/dev/mmc1");
+
+ mecsbc_process_adc(dev);
+ mecsbc_of_fixup_hwrev(dev);
+
+ return ret;
+}
+
+static const struct mecsbc_model mecsbc = {
+ .name = "Protonic MECSBC board",
+ .shortname = "mecsbc",
+};
+
+static const struct of_device_id mecsbc_of_match[] = {
+ {
+ .compatible = "prt,mecsbc",
+ .data = &mecsbc,
+ },
+ { /* sentinel */ },
+};
+
+static struct driver mecsbc_board_driver = {
+ .name = "board-mecsbc",
+ .probe = mecsbc_probe,
+ .of_compatible = mecsbc_of_match,
+};
+coredevice_platform_driver(mecsbc_board_driver);
+
+BAREBOX_DEEP_PROBE_ENABLE(mecsbc_of_match);
diff --git a/arch/arm/boards/protonic-mecsbc/lowlevel.c b/arch/arm/boards/protonic-mecsbc/lowlevel.c
new file mode 100644
index 0000000000..830d708b6e
--- /dev/null
+++ b/arch/arm/boards/protonic-mecsbc/lowlevel.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <common.h>
+#include <asm/barebox-arm.h>
+#include <mach/rockchip/hardware.h>
+#include <mach/rockchip/atf.h>
+#include <debug_ll.h>
+
+extern char __dtb_rk3568_mecsbc_start[];
+
+ENTRY_FUNCTION(start_mecsbc, r0, r1, r2)
+{
+ /*
+ * MECSBC IO domain voltages are all +3.3V, except VCCIO4 and VCCIO6
+ * Both GMAC interfaces need this to work properly.
+ * FIXME: This is done by the io-domain driver as well, but there
+ * currently is no mechanism to make sure the driver gets probed
+ * before its consumers. Remove this setup once this issue is
+ * resolved.
+ */
+ writel(RK_SETBITS(0x50), 0xfdc20140);
+
+ putc_ll('>');
+
+ if (current_el() == 3)
+ relocate_to_adr_full(RK3568_BAREBOX_LOAD_ADDRESS);
+ else
+ relocate_to_current_adr();
+
+ setup_c();
+
+ rk3568_barebox_entry(__dtb_rk3568_mecsbc_start);
+}
diff --git a/arch/arm/configs/rockchip_v8_defconfig b/arch/arm/configs/rockchip_v8_defconfig
index 35ff8963a7..216a88e824 100644
--- a/arch/arm/configs/rockchip_v8_defconfig
+++ b/arch/arm/configs/rockchip_v8_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARCH_ROCKCHIP=y
CONFIG_MACH_RK3568_EVB=y
CONFIG_MACH_RK3568_BPI_R2PRO=y
CONFIG_MACH_PINE64_QUARTZ64=y
+CONFIG_MACH_PROTONIC_MECSBC=y
CONFIG_MACH_RADXA_ROCK3=y
CONFIG_MACH_RADXA_ROCK5=y
CONFIG_MACH_RADXA_CM3=y
@@ -91,6 +92,8 @@ CONFIG_NET_NFS=y
CONFIG_NET_NETCONSOLE=y
CONFIG_OFDEVICE=y
CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_AIODEV=y
+CONFIG_ROCKCHIP_SARADC=y
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_NET_DESIGNWARE_ROCKCHIP=y
CONFIG_DRIVER_NET_RTL8169=y
@@ -138,6 +141,7 @@ CONFIG_GENERIC_PHY=y
CONFIG_USB_NOP_XCEIV=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
+CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
CONFIG_ROCKCHIP_IODOMAIN=y
# CONFIG_VIRTIO_MENU is not set
CONFIG_FS_CRAMFS=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 056d4d565b..7671b9e2ad 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -109,6 +109,7 @@ lwl-$(CONFIG_MACH_PROTONIC_IMX6) += \
imx6ul-prti6g.dtb.o \
imx6ull-jozacp.dtb.o
lwl-$(CONFIG_MACH_PROTONIC_IMX8M) += imx8mm-prt8mm.dtb.o
+lwl-$(CONFIG_MACH_PROTONIC_MECSBC) += rk3568-mecsbc.dtb.o
lwl-$(CONFIG_MACH_PROTONIC_STM32MP1) += \
stm32mp151-prtt1a.dtb.o \
stm32mp151-prtt1c.dtb.o \
diff --git a/arch/arm/dts/rk3568-mecsbc-linux.dts b/arch/arm/dts/rk3568-mecsbc-linux.dts
new file mode 100644
index 0000000000..4a36578614
--- /dev/null
+++ b/arch/arm/dts/rk3568-mecsbc-linux.dts
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <arm64/rockchip/rk3568.dtsi>
+
+/ {
+ model = "Protonic MECSBC";
+ compatible = "prt,mecsbc", "rockchip,rk3568";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &rtl8111;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ tas2562-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Speaker";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tas2562>;
+ };
+ };
+
+ vdd_gpu: regulator-vdd-gpu {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+ pinctrl-names = "default";
+ pinctrl = <&pwm1m0_pins>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <915000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-settling-time-up-us = <250>;
+ pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
+ };
+
+ vdd_npu: regulator-vdd-npu {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+ pinctrl-names = "default";
+ pinctrl = <&pwm2m0_pins>;
+ regulator-name = "vdd_npu";
+ regulator-min-microvolt = <915000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-settling-time-up-us = <250>;
+ pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
+ };
+
+ vcc_sd: bd2204-switch {
+ compatible = "regulator-gpio";
+ enable-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ regulator-name = "sdcard-gpio-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ states = <1800000 0x1>, <3300000 0x0>;
+ };
+
+ p3v3: p3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ p1v8: p1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ portc0: connector_c0 {
+ compatible = "usb-c-connector";
+ label = "USB-C0";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ usb_con_hs0: endpoint {
+ remote-endpoint = <&usb2phy0_host_portc0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ usb_con_ss0: endpoint {
+ remote-endpoint = <&combphy0_portc0>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ usb_con_sbu0: endpoint {
+ remote-endpoint = <&edp_out_portc0>;
+ };
+ };
+ };
+ };
+
+ portc1: connector_c1 {
+ compatible = "usb-c-connector";
+ label = "USB-C1";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ usb_con_hs1: endpoint {
+ remote-endpoint = <&usb2phy1_host_portc1>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ usb_con_ss1: endpoint {
+ remote-endpoint = <&combphy1_portc1>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ usb_con_sbu1: endpoint {
+ remote-endpoint = <&bridge_out_edp>;
+ };
+ };
+ };
+ };
+
+ edp0: edp at fe0c0000 {
+ compatible = "rockchip,rk3568-edp", "rockchip,rk3399-edp";
+ reg = <0x0 0xfe0c0000 0x0 0x10000>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_EDP_200M>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_EDPPHY_GRF>;
+ clock-names = "dp", "pclk", "grf";
+ power-domains = <&power RK3568_PD_VO>;
+ resets = <&cru SRST_P_EDP_CTRL>;
+ reset-names = "dp";
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_in: port at 0 {
+ reg = <0>;
+ };
+
+ edp_out: port at 1 {
+ reg = <1>;
+ };
+ };
+ };
+};
+
+&combphy0 {
+ status = "okay";
+ port {
+ combphy0_portc0: endpoint {
+ remote-endpoint = <&usb_con_ss0>;
+ };
+ };
+};
+
+&combphy1 {
+ status = "okay";
+ port {
+ combphy1_portc1: endpoint {
+ remote-endpoint = <&usb_con_ss1>;
+ };
+ };
+};
+
+&combphy2 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+ phy-handle = <&rgmii_phy0>;
+ phy-mode = "rgmii";
+ clock_in_out = "output";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_clkinout
+ &gmac0_rgmii_bus>;
+ status = "okay";
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii";
+ clock_in_out = "output";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m1_miim
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_clkinout
+ &gmac1m1_rgmii_bus>;
+ status = "okay";
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator at 60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ usbc_ctrl0: tps65987d at 20 {
+ compatible = "ti,tps65987", "ti,tps6598x";
+ reg = <0x20>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m0_xfer>;
+ status = "okay";
+
+ tas2562: tas2562 at 4c {
+ compatible = "ti,tas2562";
+ reg = <0x4c>;
+ #sound-dai-cells = <0>;
+ shutdown-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tas2562>;
+ interrupts = <RK_PD1 IRQ_TYPE_LEVEL_LOW>;
+ ti,imon-slot-no = <0>;
+ };
+
+ tc358867: tc358867 at 68 {
+ compatible = "toshiba,tc358767";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tc358867>;
+ reset-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ clocks = <&cru CLK_CIF_OUT>;
+ clock-names = "ref";
+ toshiba,hpd-pin = <0>;
+ assigned-clocks = <&cru USB480M>, <&cru CLK_CIF_OUT>;
+ assigned-clock-parents = <0>, <&cru USB480M>;
+ assigned-clock-rates = <480000000>, <19200000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ bridge_in: endpoint {
+ remote-endpoint = <&dsi1_out_bridge>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge_out_aux: endpoint at 0 {
+ remote-endpoint = <&panel_in_edp>;
+ };
+
+ bridge_out_edp: endpoint at 1 {
+ remote-endpoint = <&usb_con_sbu1>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&bridge_out_aux>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ usbc_ctrl1: tps65987d at 20 {
+ compatible = "ti,tps65987", "ti,tps6598x";
+ reg = <0x20>;
+ };
+
+ tmp1075n at 48 {
+ compatible = "ti,tmp1075";
+ reg = <0x48>;
+ };
+
+ pcf8563: rtc at 51 {
+ compatible = "nxp,pcf85363";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "rtcic_32kout";
+ };
+};
+
+&i2s1_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+};
+
+&mdio0 {
+ rgmii_phy0: ethernet-phy at 8 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_phy0_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy at 2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_phy1_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie2x1 {
+ pinctrl-names = "default";
+ /* pinctrl-0 = <&pcie20m1_pins>; */
+ pinctrl-0 = <&pcie_reset_h>;
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ pci at 0,0 {
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ reg = <0 0 0 0 0>;
+
+ rtl8111: net at 0,0 {
+ reg = <0 0 0 0 0>;
+ };
+ };
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x2m1_pins>;
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&p3v3>;
+ status = "okay";
+};
+
+&pinctrl {
+ ethernet {
+ eth_phy0_rst: eth_phy0_rst {
+ rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ eth_phy1_rst: eth_phy1_rst {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ tc358867 {
+ pinctrl_tc358867: tc358867 {
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PC0 1 &pcfg_pull_none>,
+ <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+
+ };
+ };
+
+ tas2562 {
+ pinctrl_tas2562: tas2562 {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie {
+ pcie_reset_h: pcie-reset-h {
+ rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,
+ /* pcie20_clkreqnm1 */
+ <2 RK_PD0 4 &pcfg_pull_none>,
+ /* pcie20_wakenm1 */
+ <2 RK_PD1 4 &pcfg_pull_none>;
+ };
+ };
+
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&p3v3>;
+ pmuio2-supply = <&p3v3>;
+ vccio1-supply = <&p1v8>;
+ vccio2-supply = <&p1v8>;
+ /* vccio3-supply = <&vcc_sd>; */
+ vccio3-supply = <&p3v3>;
+ vccio4-supply = <&p1v8>;
+ vccio5-supply = <&p3v3>;
+ vccio6-supply = <&p1v8>;
+ vccio7-supply = <&p3v3>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&p1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&p3v3>;
+ vqmmc-supply = <&p1v8>;
+ supports-emmc;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&p3v3>;
+ vqmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ status = "okay";
+ port {
+ usb2phy0_host_portc0: endpoint {
+ remote-endpoint = <&usb_con_hs0>;
+ };
+ };
+};
+
+&usb2phy0_otg {
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_host {
+ status = "okay";
+ port {
+ usb2phy1_host_portc1: endpoint {
+ remote-endpoint = <&usb_con_hs1>;
+ };
+ };
+};
+
+&usb2phy1_otg {
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_dsi1: endpoint at ROCKCHIP_VOP2_EP_MIPI1 {
+ reg = <ROCKCHIP_VOP2_EP_MIPI1>;
+ remote-endpoint = <&dsi1_in_vp0>;
+ };
+};
+
+&vp1 {
+ vp1_out_edp0: endpoint at ROCKCHIP_VOP2_EP_EDP0 {
+ reg = <ROCKCHIP_VOP2_EP_EDP0>;
+ remote-endpoint = <&edp_in_vp1>;
+ };
+};
+
+&dsi1 {
+ status = "okay";
+};
+
+&dsi_dphy1 {
+ status = "okay";
+};
+
+&dsi1_in {
+ dsi1_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_dsi1>;
+ };
+};
+
+&dsi1_out {
+ dsi1_out_bridge: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+};
+
+&edp_in {
+ edp_in_vp1: endpoint {
+ remote-endpoint = <&vp1_out_edp0>;
+ };
+};
+
+&edp_out {
+ edp_out_portc0: endpoint {
+ remote-endpoint = <&usb_con_sbu0>;
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&gpu_opp_table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <915000>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <915000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <915000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <920000>;
+ };
+
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <950000>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1000000>;
+ };
+};
diff --git a/arch/arm/dts/rk3568-mecsbc.dts b/arch/arm/dts/rk3568-mecsbc.dts
new file mode 100644
index 0000000000..05893b8f72
--- /dev/null
+++ b/arch/arm/dts/rk3568-mecsbc.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3568-mecsbc-linux.dts"
+#include "rk356x.dtsi"
+
+/ {
+ aliases {
+ state = &state_emmc;
+ };
+
+ chosen: chosen {
+ environment-sd {
+ compatible = "barebox,environment";
+ device-path = &environment_sd;
+ status = "disabled";
+ };
+
+ environment-emmc {
+ compatible = "barebox,environment";
+ device-path = &environment_emmc;
+ status = "okay";
+ };
+ };
+
+ state_emmc: state {
+ magic = <0x292D3A3C>;
+ compatible = "barebox,state";
+ backend-type = "raw";
+ backend = <&state_backend_emmc>;
+ backend-stridesize = <0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootstate {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ system0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ remaining_attempts {
+ reg = <0x0 0x4>;
+ type = "uint32";
+ default = <3>;
+ };
+
+ priority {
+ reg = <0x4 0x4>;
+ type = "uint32";
+ default = <21>;
+ };
+ };
+
+ system1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ remaining_attempts {
+ reg = <0x10 0x4>;
+ type = "uint32";
+ default = <3>;
+ };
+
+ priority {
+ reg = <0x14 0x4>;
+ type = "uint32";
+ default = <20>;
+ };
+ };
+
+ last_chosen {
+ reg = <0x20 0x4>;
+ type = "uint32";
+ };
+ };
+
+ blobs {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ data_partitions {
+ reg = <0x26 0x100>;
+ type = "string";
+ };
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Address will be determined by the bootloader */
+ ramoops {
+ compatible = "ramoops";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Address will be determined by the bootloader */
+ ramoops {
+ compatible = "ramoops";
+ };
+ };
+};
+
+&sdhci {
+ no-sd;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* eMMC reserved 8MiB for barebox (2 copies?), env and state */
+ environment_emmc: partition at 7b0000 {
+ label = "barebox-environment";
+ reg = <0x0 0x7b0000 0x0 0x10000>;
+ };
+
+ /* eMMC state after barebox and environment */
+ state_backend_emmc: partition at 7c0000 {
+ label = "state";
+ reg = <0x0 0x7c0000 0x0 0x40000>;
+ };
+ };
+};
+
+&sdmmc0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ environment_sd: partition at 7b0000 {
+ label = "barebox-environment";
+ reg = <0x0 0x7b0000 0x0 0x10000>;
+ };
+ };
+};
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 8cdf2c28a9..0e2b7810bc 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -91,6 +91,12 @@ config MACH_PINE64_QUARTZ64
help
Say Y here if you are using a Pine64 Quartz64
+config MACH_PROTONIC_MECSBC
+ select ARCH_RK3568
+ bool "Protonic MECSBC"
+ help
+ Say Y here if you are using a Protonic MECSBC
+
config MACH_RADXA_ROCK3
select ARCH_RK3568
bool "Radxa ROCK3"
diff --git a/images/Makefile.rockchip b/images/Makefile.rockchip
index ea32af4241..ceacfde10d 100644
--- a/images/Makefile.rockchip
+++ b/images/Makefile.rockchip
@@ -32,6 +32,7 @@ image-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += barebox-rk3288-phycore-som.img
$(call build_rockchip_image, CONFIG_MACH_RK3568_EVB, start_rk3568_evb, rockchip-rk3568-evb/sdram-init.bin, rk3568-evb)
$(call build_rockchip_image, CONFIG_MACH_RK3568_BPI_R2PRO, start_rk3568_bpi_r2pro, rockchip-rk3568-bpi-r2pro/sdram-init.bin, rk3568-bpi-r2pro)
$(call build_rockchip_image, CONFIG_MACH_PINE64_QUARTZ64, start_quartz64a, pine64-quartz64/sdram-init.bin, quartz64a)
+$(call build_rockchip_image, CONFIG_MACH_PROTONIC_MECSBC, start_mecsbc, protonic-mecsbc/sdram-init.bin, mecsbc)
$(call build_rockchip_image, CONFIG_MACH_RADXA_ROCK3, start_rock3a, radxa-rock3/sdram-init.bin, rock3a)
$(call build_rockchip_image, CONFIG_MACH_RADXA_ROCK5, start_rock5b, radxa-rock5/sdram-init.bin, rock5b)
$(call build_rockchip_image, CONFIG_MACH_RADXA_CM3, start_radxa_cm3_io, radxa-cm3/sdram-init.bin, radxa-cm3-io)
--
2.39.2
More information about the barebox
mailing list