[PATCH] ARM: i.MX8M: don't print TF-A version

Sascha Hauer sha at pengutronix.de
Tue Sep 26 04:39:37 PDT 2023


On Mon, Sep 11, 2023 at 12:12:19PM +0200, Ahmad Fatoum wrote:
> In usual configurations, TF-A already prints its version on startup, so
> printing it in barebox again is unnecessary and less informational than
> the TF-A print and complicates running barebox without TF-A.
> Thus just drop it.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
>  arch/arm/mach-imx/imx8m.c | 11 -----------
>  1 file changed, 11 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/mach-imx/imx8m.c b/arch/arm/mach-imx/imx8m.c
> index af44b089e08a..c7c799c64bc4 100644
> --- a/arch/arm/mach-imx/imx8m.c
> +++ b/arch/arm/mach-imx/imx8m.c
> @@ -56,7 +56,6 @@ u64 imx8m_uid(void)
>  static int imx8m_init(const char *cputypestr)
>  {
>  	void __iomem *src = IOMEM(MX8M_SRC_BASE_ADDR);
> -	struct arm_smccc_res res;
>  
>  	genpd_activate();
>  
> @@ -66,16 +65,6 @@ static int imx8m_init(const char *cputypestr)
>  	imx_set_reset_reason(src + IMX7_SRC_SRSR, imx7_reset_reasons);
>  	pr_info("%s unique ID: %llx\n", cputypestr, imx8m_uid());
>  
> -	if (IS_ENABLED(CONFIG_ARM_SMCCC) &&
> -	    IS_ENABLED(CONFIG_FIRMWARE_IMX8MQ_ATF)) {
> -		arm_smccc_smc(IMX_SIP_BUILDINFO,
> -			      IMX_SIP_BUILDINFO_GET_COMMITHASH,
> -			      0, 0, 0, 0, 0, 0, &res);
> -
> -		if (res.a0 > 0)
> -			pr_info("i.MX ARM Trusted Firmware: %s\n", (char *)&res.a0);
> -	}
> -
>  	if (IS_ENABLED(CONFIG_PBL_OPTEE) && tzc380_is_enabled() &&
>  	    !of_find_node_by_path_from(NULL, "/firmware/optee")) {
>  		static struct of_optee_fixup_data optee_fixup_data = {
> -- 
> 2.39.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list