[PATCH 3/6] nvmem: bsec: add support for STM32 bsec pseudo TA
Ahmad Fatoum
a.fatoum at pengutronix.de
Sun Nov 26 22:40:31 PST 2023
While OP-TEE on STM32MP15 still implements the old SMC based API
to access the OTP, on STM32MP13, communication with the pseudo TA
is mandatory. Therefore add a driver that probes for OP-TEE and
talks to it to read and write the OTP.
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
drivers/nvmem/Kconfig | 6 +
drivers/nvmem/Makefile | 1 +
drivers/nvmem/bsec.c | 133 +++++++++++--
drivers/nvmem/stm32-bsec-optee-ta.c | 298 ++++++++++++++++++++++++++++
drivers/nvmem/stm32-bsec-optee-ta.h | 85 ++++++++
5 files changed, 502 insertions(+), 21 deletions(-)
create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.c
create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.h
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 807344305d78..255198b2ad81 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -90,6 +90,12 @@ config STM32_BSEC_WRITE
mw -l -d /dev/stm32-bsec 0x000000e4+4 0x78563412
mw -l -d /dev/stm32-bsec 0x000000e8+4 0x0000bc9a
+config STM32_BSEC_OPTEE_TA
+ def_bool STM32_BSEC && OPTEE
+ help
+ Say y here to enable the accesses to STM32MP SoC OTPs by the OP-TEE
+ trusted application STM32MP BSEC.
+
config KVX_OTP_NV
tristate "kalray KVX OTP Non volatile regs Support"
depends on KVX
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 22f8e8634239..31db05e5a71c 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -23,6 +23,7 @@ nvmem_eeprom_93xx46-y := eeprom_93xx46.o
obj-$(CONFIG_STM32_BSEC) += nvmem_bsec.o
nvmem_bsec-y := bsec.o
+nvmem_bsec-$(CONFIG_STM32_BSEC_OPTEE_TA) += stm32-bsec-optee-ta.o
obj-$(CONFIG_KVX_OTP_NV) += nvmem-kvx-otp-nv.o
nvmem-kvx-otp-nv-y := kvx-otp-nv.o
diff --git a/drivers/nvmem/bsec.c b/drivers/nvmem/bsec.c
index 7f24063b9ed6..889f14428d59 100644
--- a/drivers/nvmem/bsec.c
+++ b/drivers/nvmem/bsec.c
@@ -18,24 +18,28 @@
#include <machine_id.h>
#include <linux/nvmem-provider.h>
+#include "stm32-bsec-optee-ta.h"
+
#define BSEC_OTP_SERIAL 13
struct bsec_priv {
struct device dev;
- u32 svc_id;
struct regmap_config map_config;
int permanent_write_enable;
+ u8 lower;
+ struct tee_context *ctx;
};
struct stm32_bsec_data {
- unsigned long svc_id;
- int num_regs;
+ size_t size;
+ u8 lower;
+ bool ta;
};
-static int bsec_smc(struct bsec_priv *priv, enum bsec_op op, u32 field,
+static int bsec_smc(enum bsec_op op, u32 field,
unsigned data2, unsigned *val)
{
- enum bsec_smc ret = stm32mp_smc(priv->svc_id, op, field / 4, data2, val);
+ enum bsec_smc ret = stm32mp_smc(STM32_SMC_BSEC, op, field / 4, data2, val);
switch(ret)
{
case BSEC_SMC_OK:
@@ -58,7 +62,7 @@ static int bsec_smc(struct bsec_priv *priv, enum bsec_op op, u32 field,
static int stm32_bsec_read_shadow(void *ctx, unsigned reg, unsigned *val)
{
- return bsec_smc(ctx, BSEC_SMC_READ_SHADOW, reg, 0, val);
+ return bsec_smc(BSEC_SMC_READ_SHADOW, reg, 0, val);
}
static int stm32_bsec_reg_write(void *ctx, unsigned reg, unsigned val)
@@ -66,9 +70,9 @@ static int stm32_bsec_reg_write(void *ctx, unsigned reg, unsigned val)
struct bsec_priv *priv = ctx;
if (priv->permanent_write_enable)
- return bsec_smc(ctx, BSEC_SMC_PROG_OTP, reg, val, NULL);
+ return bsec_smc(BSEC_SMC_PROG_OTP, reg, val, NULL);
else
- return bsec_smc(ctx, BSEC_SMC_WRITE_SHADOW, reg, val, NULL);
+ return bsec_smc(BSEC_SMC_WRITE_SHADOW, reg, val, NULL);
}
static struct regmap_bus stm32_bsec_regmap_bus = {
@@ -94,13 +98,17 @@ static int stm32_bsec_read_mac(struct bsec_priv *priv, int offset, u8 *mac)
u32 val[2];
int ret;
- /* Some TF-A does not copy all of OTP into shadow registers, so make
- * sure we read the _real_ OTP bits here.
- */
- ret = bsec_smc(priv, BSEC_SMC_READ_OTP, offset * 4, 0, &val[0]);
- if (ret)
- return ret;
- ret = bsec_smc(priv, BSEC_SMC_READ_OTP, offset * 4 + 4, 0, &val[1]);
+ if (priv->ctx) {
+ ret = stm32_bsec_optee_ta_read(priv->ctx, offset * 4, val, sizeof(val));
+ } else {
+ /* Some TF-A does not copy all of OTP into shadow registers, so make
+ * sure we read the _real_ OTP bits here.
+ */
+ ret = bsec_smc(BSEC_SMC_READ_OTP, offset * 4, 0, &val[0]);
+ if (!ret)
+ ret = bsec_smc(BSEC_SMC_READ_OTP, offset * 4 + 4, 0, &val[1]);
+ }
+
if (ret)
return ret;
@@ -141,8 +149,56 @@ static void stm32_bsec_init_dt(struct bsec_priv *priv, struct device *dev,
of_eth_register_ethaddr(rnode, mac);
}
+static int stm32_bsec_pta_read(void *context, unsigned int offset, unsigned int *val)
+{
+ struct bsec_priv *priv = context;
+
+ return stm32_bsec_optee_ta_read(priv->ctx, offset, val, sizeof(val));
+}
+
+static int stm32_bsec_pta_write(void *context, unsigned int offset, unsigned int val)
+{
+ struct bsec_priv *priv = context;
+
+ if (!priv->permanent_write_enable)
+ return -EACCES;
+
+ return stm32_bsec_optee_ta_write(priv->ctx, priv->lower, offset, &val, sizeof(val));
+}
+
+static struct regmap_bus stm32_bsec_optee_regmap_bus = {
+ .reg_write = stm32_bsec_pta_write,
+ .reg_read = stm32_bsec_pta_read,
+};
+
+static bool stm32_bsec_smc_check(void)
+{
+ u32 val;
+ int ret;
+
+ /* check that the OP-TEE support the BSEC SMC (legacy mode) */
+ ret = bsec_smc(BSEC_SMC_READ_SHADOW, 0, 0, &val);
+
+ return !ret;
+}
+
+static bool optee_presence_check(void)
+{
+ struct device_node *np;
+ bool tee_detected = false;
+
+ /* check that the OP-TEE node is present and available. */
+ np = of_find_compatible_node(NULL, NULL, "linaro,optee-tz");
+ if (np && of_device_is_available(np))
+ tee_detected = true;
+ of_node_put(np);
+
+ return tee_detected;
+}
+
static int stm32_bsec_probe(struct device *dev)
{
+ const struct regmap_bus *regmap_bus;
struct regmap *map;
struct bsec_priv *priv;
int ret = 0;
@@ -155,8 +211,6 @@ static int stm32_bsec_probe(struct device *dev)
priv = xzalloc(sizeof(*priv));
- priv->svc_id = data->svc_id;
-
dev_set_name(&priv->dev, "bsec");
priv->dev.parent = dev;
register_device(&priv->dev);
@@ -164,9 +218,28 @@ static int stm32_bsec_probe(struct device *dev)
priv->map_config.reg_bits = 32;
priv->map_config.val_bits = 32;
priv->map_config.reg_stride = 4;
- priv->map_config.max_register = data->num_regs;
+ priv->map_config.max_register = (data->size / 4) - 1;
- map = regmap_init(dev, &stm32_bsec_regmap_bus, priv, &priv->map_config);
+ priv->lower = data->lower;
+
+ if (data->ta || optee_presence_check()) {
+ ret = stm32_bsec_optee_ta_open(&priv->ctx);
+ if (ret) {
+ /* wait for OP-TEE client driver to be up and ready */
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ /* BSEC PTA is required or SMC not supported */
+ if (data->ta || !stm32_bsec_smc_check())
+ return ret;
+ }
+ }
+
+ if (priv->ctx)
+ regmap_bus = &stm32_bsec_optee_regmap_bus;
+ else
+ regmap_bus = &stm32_bsec_regmap_bus;
+
+ map = regmap_init(dev, regmap_bus, priv, &priv->map_config);
if (IS_ERR(map))
return PTR_ERR(map);
@@ -184,16 +257,34 @@ static int stm32_bsec_probe(struct device *dev)
stm32_bsec_init_dt(priv, dev, map);
+ dev_dbg(dev, "using %s API\n", priv->ctx ? "OP-TEE" : "SiP");
+
return 0;
}
+/*
+ * STM32MP15/13 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
+ * => 96 x 32-bits data words
+ * - Lower: 1K bits, 2:1 redundancy, incremental bit programming
+ * => 32 (x 32-bits) lower shadow registers = words 0 to 31
+ * - Upper: 2K bits, ECC protection, word programming only
+ * => 64 (x 32-bits) = words 32 to 95
+ */
static struct stm32_bsec_data stm32mp15_bsec_data = {
- .num_regs = 95 * 4,
- .svc_id = STM32_SMC_BSEC,
+ .size = 384,
+ .lower = 32,
+ .ta = false,
+};
+
+static const struct stm32_bsec_data stm32mp13_bsec_data = {
+ .size = 384,
+ .lower = 32,
+ .ta = true,
};
static __maybe_unused struct of_device_id stm32_bsec_dt_ids[] = {
{ .compatible = "st,stm32mp15-bsec", .data = &stm32mp15_bsec_data },
+ { .compatible = "st,stm32mp13-bsec", .data = &stm32mp13_bsec_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, stm32_bsec_dt_ids);
diff --git a/drivers/nvmem/stm32-bsec-optee-ta.c b/drivers/nvmem/stm32-bsec-optee-ta.c
new file mode 100644
index 000000000000..f89ce791dd12
--- /dev/null
+++ b/drivers/nvmem/stm32-bsec-optee-ta.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
+ *
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#include <linux/tee_drv.h>
+
+#include "stm32-bsec-optee-ta.h"
+
+/*
+ * Read OTP memory
+ *
+ * [in] value[0].a OTP start offset in byte
+ * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
+ * [out] memref[1].buffer Output buffer to store read values
+ * [out] memref[1].size Size of OTP to be read
+ *
+ * Return codes:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
+ */
+#define PTA_BSEC_READ_MEM 0x0
+
+/*
+ * Write OTP memory
+ *
+ * [in] value[0].a OTP start offset in byte
+ * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
+ * [in] memref[1].buffer Input buffer to read values
+ * [in] memref[1].size Size of OTP to be written
+ *
+ * Return codes:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
+ */
+#define PTA_BSEC_WRITE_MEM 0x1
+
+/* value of PTA_BSEC access type = value[in] b */
+#define SHADOW_ACCESS 0
+#define FUSE_ACCESS 1
+#define LOCK_ACCESS 2
+
+/* Bitfield definition for LOCK status */
+#define LOCK_PERM BIT(30)
+
+/* OP-TEE STM32MP BSEC TA UUID */
+static const uuid_t stm32mp_bsec_ta_uuid =
+ UUID_INIT(0x94cf71ad, 0x80e6, 0x40b5,
+ 0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03);
+
+/*
+ * Check whether this driver supports the BSEC TA in the TEE instance
+ * represented by the params (ver/data) to this function.
+ */
+static int stm32_bsec_optee_ta_match(struct tee_ioctl_version_data *ver,
+ const void *data)
+{
+ /* Currently this driver only supports GP compliant, OP-TEE based TA */
+ if ((ver->impl_id == TEE_IMPL_ID_OPTEE) &&
+ (ver->gen_caps & TEE_GEN_CAP_GP))
+ return 1;
+ else
+ return 0;
+}
+
+/* Open a session to OP-TEE for STM32MP BSEC TA */
+static int stm32_bsec_ta_open_session(struct tee_context *ctx, u32 *id)
+{
+ struct tee_ioctl_open_session_arg sess_arg;
+ int rc;
+
+ memset(&sess_arg, 0, sizeof(sess_arg));
+ export_uuid(sess_arg.uuid, &stm32mp_bsec_ta_uuid);
+ sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
+ sess_arg.num_params = 0;
+
+ rc = tee_client_open_session(ctx, &sess_arg, NULL);
+ if ((rc < 0) || (sess_arg.ret != 0)) {
+ pr_err("%s: tee_client_open_session failed err:%#x, ret:%#x\n",
+ __func__, sess_arg.ret, rc);
+ if (!rc)
+ rc = -EINVAL;
+ } else {
+ *id = sess_arg.session;
+ }
+
+ return rc;
+}
+
+/* close a session to OP-TEE for STM32MP BSEC TA */
+static void stm32_bsec_ta_close_session(void *ctx, u32 id)
+{
+ tee_client_close_session(ctx, id);
+}
+
+/* stm32_bsec_optee_ta_open() - initialize the STM32MP BSEC TA */
+int stm32_bsec_optee_ta_open(struct tee_context **ctx)
+{
+ struct tee_context *tee_ctx;
+ u32 session_id;
+ int rc;
+
+ /* Open context with TEE driver */
+ tee_ctx = tee_client_open_context(NULL, stm32_bsec_optee_ta_match, NULL, NULL);
+ if (IS_ERR(tee_ctx)) {
+ rc = PTR_ERR(tee_ctx);
+ if (rc == -ENOENT)
+ return -EPROBE_DEFER;
+ pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc);
+
+ return rc;
+ }
+
+ /* Check STM32MP BSEC TA presence */
+ rc = stm32_bsec_ta_open_session(tee_ctx, &session_id);
+ if (rc) {
+ tee_client_close_context(tee_ctx);
+ return rc;
+ }
+
+ stm32_bsec_ta_close_session(tee_ctx, session_id);
+
+ *ctx = tee_ctx;
+
+ return 0;
+}
+
+/* stm32_bsec_optee_ta_open() - release the PTA STM32MP BSEC TA */
+void stm32_bsec_optee_ta_close(void *ctx)
+{
+ tee_client_close_context(ctx);
+}
+
+/* stm32_bsec_optee_ta_read() - nvmem read access using PTA client driver */
+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
+ void *buf, size_t bytes)
+{
+ struct tee_shm *shm;
+ struct tee_ioctl_invoke_arg arg;
+ struct tee_param param[2];
+ u8 *shm_buf;
+ u32 start, num_bytes;
+ int ret;
+ u32 session_id;
+
+ ret = stm32_bsec_ta_open_session(ctx, &session_id);
+ if (ret)
+ return ret;
+
+ memset(&arg, 0, sizeof(arg));
+ memset(¶m, 0, sizeof(param));
+
+ arg.func = PTA_BSEC_READ_MEM;
+ arg.session = session_id;
+ arg.num_params = 2;
+
+ /* align access on 32bits */
+ start = ALIGN_DOWN(offset, 4);
+ num_bytes = round_up(offset + bytes - start, 4);
+ param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ param[0].u.value.a = start;
+ param[0].u.value.b = SHADOW_ACCESS;
+
+ shm = tee_shm_alloc_kernel_buf(ctx, num_bytes);
+ if (IS_ERR(shm)) {
+ ret = PTR_ERR(shm);
+ goto out_tee_session;
+ }
+
+ param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
+ param[1].u.memref.shm = shm;
+ param[1].u.memref.size = num_bytes;
+
+ ret = tee_client_invoke_func(ctx, &arg, param);
+ if (ret < 0 || arg.ret != 0) {
+ pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n",
+ arg.ret, ret);
+ if (!ret)
+ ret = -EIO;
+ }
+ if (!ret) {
+ shm_buf = tee_shm_get_va(shm, 0);
+ if (IS_ERR(shm_buf)) {
+ ret = PTR_ERR(shm_buf);
+ pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
+ } else {
+ /* read data from 32 bits aligned buffer */
+ memcpy(buf, &shm_buf[offset % 4], bytes);
+ }
+ }
+
+ tee_shm_free(shm);
+
+out_tee_session:
+ stm32_bsec_ta_close_session(ctx, session_id);
+
+ return ret;
+}
+
+/* stm32_bsec_optee_ta_write() - nvmem write access using PTA client driver */
+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
+ unsigned int offset, void *buf, size_t bytes)
+{ struct tee_shm *shm;
+ struct tee_ioctl_invoke_arg arg;
+ struct tee_param param[2];
+ u8 *shm_buf;
+ int ret;
+ u32 session_id;
+
+ ret = stm32_bsec_ta_open_session(ctx, &session_id);
+ if (ret)
+ return ret;
+
+ /* Allow only writing complete 32-bits aligned words */
+ if ((bytes % 4) || (offset % 4))
+ return -EINVAL;
+
+ memset(&arg, 0, sizeof(arg));
+ memset(¶m, 0, sizeof(param));
+
+ arg.func = PTA_BSEC_WRITE_MEM;
+ arg.session = session_id;
+ arg.num_params = 2;
+
+ param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ param[0].u.value.a = offset;
+ param[0].u.value.b = FUSE_ACCESS;
+
+ shm = tee_shm_alloc_kernel_buf(ctx, bytes);
+ if (IS_ERR(shm)) {
+ ret = PTR_ERR(shm);
+ goto out_tee_session;
+ }
+
+ param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
+ param[1].u.memref.shm = shm;
+ param[1].u.memref.size = bytes;
+
+ shm_buf = tee_shm_get_va(shm, 0);
+ if (IS_ERR(shm_buf)) {
+ ret = PTR_ERR(shm_buf);
+ pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
+ tee_shm_free(shm);
+
+ goto out_tee_session;
+ }
+
+ memcpy(shm_buf, buf, bytes);
+
+ ret = tee_client_invoke_func(ctx, &arg, param);
+ if (ret < 0 || arg.ret != 0) {
+ pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
+ if (!ret)
+ ret = -EIO;
+ }
+ pr_debug("Write OTPs %d to %zu, ret=%d\n", offset / 4, (offset + bytes) / 4, ret);
+
+ /* Lock the upper OTPs with ECC protection, word programming only */
+ if (!ret && ((offset + bytes) >= (lower * 4))) {
+ u32 start, nb_lock;
+ u32 *lock = (u32 *)shm_buf;
+ int i;
+
+ /*
+ * don't lock the lower OTPs, no ECC protection and incremental
+ * bit programming, a second write is allowed
+ */
+ start = max_t(u32, offset, lower * 4);
+ nb_lock = (offset + bytes - start) / 4;
+
+ param[0].u.value.a = start;
+ param[0].u.value.b = LOCK_ACCESS;
+ param[1].u.memref.size = nb_lock * 4;
+
+ for (i = 0; i < nb_lock; i++)
+ lock[i] = LOCK_PERM;
+
+ ret = tee_client_invoke_func(ctx, &arg, param);
+ if (ret < 0 || arg.ret != 0) {
+ pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
+ if (!ret)
+ ret = -EIO;
+ }
+ pr_debug("Lock upper OTPs %d to %d, ret=%d\n",
+ start / 4, start / 4 + nb_lock, ret);
+ }
+
+ tee_shm_free(shm);
+
+out_tee_session:
+ stm32_bsec_ta_close_session(ctx, session_id);
+
+ return ret;
+}
diff --git a/drivers/nvmem/stm32-bsec-optee-ta.h b/drivers/nvmem/stm32-bsec-optee-ta.h
new file mode 100644
index 000000000000..7180476c40a1
--- /dev/null
+++ b/drivers/nvmem/stm32-bsec-optee-ta.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
+ *
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#include <asm-generic/errno.h>
+#include <linux/types.h>
+
+struct tee_context;
+
+#if IS_ENABLED(CONFIG_STM32_BSEC_OPTEE_TA)
+/**
+ * stm32_bsec_optee_ta_open() - initialize the STM32 BSEC TA
+ * @ctx: the OP-TEE context on success
+ *
+ * Return:
+ * On success, 0. On failure, -errno.
+ */
+int stm32_bsec_optee_ta_open(struct tee_context **ctx);
+
+/**
+ * stm32_bsec_optee_ta_close() - release the STM32 BSEC TA
+ * @ctx: the OP-TEE context
+ *
+ * This function used to clean the OP-TEE resources initialized in
+ * stm32_bsec_optee_ta_open(); it can be used as callback to
+ * devm_add_action_or_reset()
+ */
+void stm32_bsec_optee_ta_close(void *ctx);
+
+/**
+ * stm32_bsec_optee_ta_read() - nvmem read access using TA client driver
+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
+ * @offset: nvmem offset
+ * @buf: buffer to fill with nvem values
+ * @bytes: number of bytes to read
+ *
+ * Return:
+ * On success, 0. On failure, -errno.
+ */
+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
+ void *buf, size_t bytes);
+
+/**
+ * stm32_bsec_optee_ta_write() - nvmem write access using TA client driver
+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
+ * @lower: number of lower OTP, not protected by ECC
+ * @offset: nvmem offset
+ * @buf: buffer with nvem values
+ * @bytes: number of bytes to write
+ *
+ * Return:
+ * On success, 0. On failure, -errno.
+ */
+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
+ unsigned int offset, void *buf, size_t bytes);
+
+#else
+
+static inline int stm32_bsec_optee_ta_open(struct tee_context **ctx)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline void stm32_bsec_optee_ta_close(void *ctx)
+{
+}
+
+static inline int stm32_bsec_optee_ta_read(struct tee_context *ctx,
+ unsigned int offset, void *buf,
+ size_t bytes)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int stm32_bsec_optee_ta_write(struct tee_context *ctx,
+ unsigned int lower,
+ unsigned int offset, void *buf,
+ size_t bytes)
+{
+ return -EOPNOTSUPP;
+}
+#endif /* CONFIG_NVMEM_STM32_BSEC_OPTEE_TA */
--
2.39.2
More information about the barebox
mailing list