Device tree probe order

[Renaud Barbier]

Thanks.
 I had found that swapping the device driver registration made the QSPI probe first.  Changing DSPI to be registered by device_initall and QSPI by coredevice_initcall does what I am expected. 
I will look at the method you offered.

> -----Original Message-----
> From: Sascha Hauer <sha at pengutronix.de>
> Sent: Thursday, November 16, 2023 7:56 AM
> To: Renaud Barbier <Renaud.Barbier at ametek.com>
> Cc: Barebox List <barebox at lists.infradead.org>
> Subject: Re: Device tree probe order
> 
> ***NOTICE*** This came from an external source. Use caution when replying,
> clicking links, or opening attachments.
> 
> Hi Renauld,
> 
> On Wed, Nov 15, 2023 at 04:47:03PM +0000, Renaud Barbier wrote:
> > We have a board based on the LS1026A with a boot SPI NOR on the QSPI
> > controller and FRAM on the DSPI controller.  Currently, the DSPI is
> > being probed first and got the device node /dev/m25p0. The boot SPI
> > get /dev/m25p1.
> >
> > I would like the  QSPI NOR to be assigned to /dev/m25p0 and the FRAM
> > to /dev/m25p1.
> >
> > Is it possible to change the probing order or the device node
> > assignment?
> 
> You can create aliases in the device tree for both flashes, see
> drivers/mtd/devices/m25p80.c:258:
> 
>         if (dev->of_node)
>                 flash_name = of_alias_get(dev->of_node);
> 
> Sascha
> 
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       |
> https://urldefense.com/v3/__http://www.pengutronix.de/__;!!HKOSU0g!BN8zz
> nbk0b3uelLqUvSN2rw8QCvPlzwneze_sHvn80jabgpUMpW6mKUMPR5ix-
> ZYthtB_DT_P_RRp4-IpE3s$   |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |