[PATCH 3/8] commands: mmc: add write_reliability subcommand
Marco Felsch
m.felsch at pengutronix.de
Tue Nov 14 05:30:02 PST 2023
From: LI Qingwu <Qing-wu.Li at leica-geosystems.com.cn>
Add new sub-command to enable the write reliability.
Signed-off-by: LI Qingwu <Qing-wu.Li at leica-geosystems.com.cn>
[m.felsch at pengutronix.de: minor cleanups]
Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
commands/mmc.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++-
include/mci.h | 4 +++
2 files changed, 71 insertions(+), 1 deletion(-)
diff --git a/commands/mmc.c b/commands/mmc.c
index 1e62b71850e0..1009b16bfdf7 100644
--- a/commands/mmc.c
+++ b/commands/mmc.c
@@ -147,6 +147,67 @@ static int do_mmc_enh_area(int argc, char *argv[])
return COMMAND_ERROR;
}
+static int do_mmc_write_reliability(int argc, char *argv[])
+{
+ const char *devpath;
+ struct mci *mci;
+ u8 *ext_csd;
+
+ if (argc - optind != 1) {
+ printf("Usage: mmc write_reliability /dev/mmcX\n");
+ return COMMAND_ERROR_USAGE;
+ }
+
+ devpath = argv[optind];
+
+ mci = mci_get_device_by_devpath(devpath);
+ if (!mci) {
+ printf("Failure to open %s as mci device\n", devpath);
+ return COMMAND_ERROR;
+ }
+
+ ext_csd = mci_get_ext_csd(mci);
+ if (IS_ERR(ext_csd))
+ return COMMAND_ERROR;
+
+ if (ext_csd[EXT_CSD_PARTITION_SETTING_COMPLETED]) {
+ printf("Partitioning already finalized\n");
+ goto error;
+ }
+
+ if (!(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_EN_REL_WR)) {
+ printf("Device doesn't support the enhanced definition of reliable write\n");
+ goto error;
+ }
+
+ if (!(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_HS_CTRL_REL)) {
+ printf("Device doesn't support WR_REL_SET writes\n");
+ goto error;
+ }
+
+ /*
+ * Host has one opportunity to write all of the bits. Separate writes to
+ * individual bits are not permitted so set all bits for now.
+ */
+ if ((ext_csd[EXT_CSD_WR_REL_SET] & 0x1f) != 0x1f) {
+ int ret;
+
+ ret = mci_switch(mci, EXT_CSD_WR_REL_SET, 0x1f);
+ if (ret) {
+ printf("Failure to write to EXT_CSD_WR_REL_SET\n");
+ goto error;
+ }
+ }
+
+ free(ext_csd);
+
+ return COMMAND_SUCCESS;
+
+error:
+ free(ext_csd);
+ return COMMAND_ERROR;
+}
+
static struct {
const char *cmd;
int (*func)(int argc, char *argv[]);
@@ -154,6 +215,9 @@ static struct {
{
.cmd = "enh_area",
.func = do_mmc_enh_area,
+ }, {
+ .cmd = "write_reliability",
+ .func = do_mmc_write_reliability,
}
};
@@ -189,11 +253,13 @@ BAREBOX_CMD_HELP_TEXT("The subcommand enh_area creates an enhanced area of")
BAREBOX_CMD_HELP_TEXT("maximal size.")
BAREBOX_CMD_HELP_TEXT("Note, with -c this is an irreversible action.")
BAREBOX_CMD_HELP_OPT("-c", "complete partitioning")
+BAREBOX_CMD_HELP_TEXT("")
+BAREBOX_CMD_HELP_TEXT("The subcommand write_reliability enable write reliability")
BAREBOX_CMD_HELP_END
BAREBOX_CMD_START(mmc)
.cmd = do_mmc,
- BAREBOX_CMD_OPTS("enh_area [-c] /dev/mmcX")
+ BAREBOX_CMD_OPTS("write_reliability|enh_area [-c] /dev/mmcX")
BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
BAREBOX_CMD_HELP(cmd_mmc_help)
BAREBOX_CMD_END
diff --git a/include/mci.h b/include/mci.h
index f38384613728..4fed8d739284 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -307,6 +307,10 @@
/* register PARTITIONING_SUPPORT [160] */
#define EXT_CSD_ENH_ATTRIBUTE_EN_MASK (1 << 1)
+/* register EXT_CSD_WR_REL_PARAM [166] */
+#define EXT_CSD_HS_CTRL_REL (1 << 0)
+#define EXT_CSD_EN_REL_WR (1 << 2)
+
/* register BUS_WIDTH [183], field Bus Mode Selection [4:0] */
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
--
2.39.2
More information about the barebox
mailing list