[PATCH v2 11/13] ARM: boards: sunxi: Add initial support for the pinephone
Jules Maselbas
jmaselbas at zdiv.net
Wed May 31 23:19:25 PDT 2023
On Thu, Jun 01, 2023 at 08:00:47AM +0200, Ahmad Fatoum wrote:
> On 01.06.23 07:50, Jules Maselbas wrote:
> > Hi Sascha,
> >
> > Thanks for your review
> >
> > On Tue, May 30, 2023 at 10:42:36AM +0200, Sascha Hauer wrote:
> >> On Thu, May 25, 2023 at 01:43:26AM +0200, Jules Maselbas wrote:
> >>> Signed-off-by: Jules Maselbas <jmaselbas at zdiv.net>
> >>> ---
> >>> arch/arm/boards/Makefile | 1 +
> >>> arch/arm/boards/pine64-pinephone/Makefile | 2 +
> >>> arch/arm/boards/pine64-pinephone/board.c | 0
> >>> arch/arm/boards/pine64-pinephone/lowlevel.c | 104 ++++++++++++++++++++
> >>> arch/arm/configs/pinephone_defconfig | 12 +++
> >>> arch/arm/dts/Makefile | 1 +
> >>> arch/arm/dts/sun50i-a64-pinephone-1_2.dts | 3 +
> >>> arch/arm/mach-sunxi/Kconfig | 17 ++++
> >>> images/Makefile.sunxi | 9 ++
> >>> include/mach/sunxi/init.h | 4 +
> >>> 10 files changed, 153 insertions(+)
> >>> create mode 100644 arch/arm/boards/pine64-pinephone/Makefile
> >>> create mode 100644 arch/arm/boards/pine64-pinephone/board.c
> >>> create mode 100644 arch/arm/boards/pine64-pinephone/lowlevel.c
> >>> create mode 100644 arch/arm/configs/pinephone_defconfig
> >>> create mode 100644 arch/arm/dts/sun50i-a64-pinephone-1_2.dts
> >>>
> >>> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> >>> index b204c257f6..f4796f5374 100644
> >>> --- a/arch/arm/boards/Makefile
> >>> +++ b/arch/arm/boards/Makefile
> >>> @@ -96,6 +96,7 @@ obj-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += phytec-som-imx6/
> >>> obj-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += phytec-phycore-imx7/
> >>> obj-$(CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1) += phytec-phycore-stm32mp1/
> >>> obj-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += phytec-som-imx8mq/
> >>> +obj-$(CONFIG_MACH_PINE64_PINEPHONE) += pine64-pinephone/
> >>> obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += plathome-openblocks-ax3/
> >>> obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += plathome-openblocks-a6/
> >>> obj-$(CONFIG_MACH_PM9261) += pm9261/
> >>> diff --git a/arch/arm/boards/pine64-pinephone/Makefile b/arch/arm/boards/pine64-pinephone/Makefile
> >>> new file mode 100644
> >>> index 0000000000..092c31d6b2
> >>> --- /dev/null
> >>> +++ b/arch/arm/boards/pine64-pinephone/Makefile
> >>> @@ -0,0 +1,2 @@
> >>> +lwl-y += lowlevel.o
> >>> +obj-y += board.o
> >>> diff --git a/arch/arm/boards/pine64-pinephone/board.c b/arch/arm/boards/pine64-pinephone/board.c
> >>> new file mode 100644
> >>> index 0000000000..e69de29bb2
> >>> diff --git a/arch/arm/boards/pine64-pinephone/lowlevel.c b/arch/arm/boards/pine64-pinephone/lowlevel.c
> >>> new file mode 100644
> >>> index 0000000000..262d194864
> >>> --- /dev/null
> >>> +++ b/arch/arm/boards/pine64-pinephone/lowlevel.c
> >>> @@ -0,0 +1,104 @@
> >>> +// SPDX-License-Identifier: GPL-2.0+
> >>> +#include <common.h>
> >>> +#include <debug_ll.h>
> >>> +#include <linux/sizes.h>
> >>> +#include <linux/bitops.h>
> >>> +#include <mach/sunxi/barebox-arm.h>
> >>
> >> This file is missing in this series. Forgot to git add it?
> > ooops, yes forgot to add it.
> > There is almost nothing in it:
> > ```
> > #include <asm/barebox-arm.h>
> >
> > #define SUN50I_A64_ENTRY_FUNCTION(name, arg0, arg1, arg2) \
> > ENTRY_FUNCTION_WITHSTACK(name, SUN50I_PBL_STACK_TOP, arg0, arg1, arg2)
> > ```
> > that's all
>
> Can this pull in the eGON header as well? That way sun50i entry points
> can just look like normal C functions and board porters need not be aware
> of the magic.
well, I already spent huge amount of time trying to do so and failed so right
now I do not want to try to fit the headers into the entry macro again.
The issue was that I got multiple instances of the each headers because there
where two instance of the entry macro in the same lowlevel.c file...
> >
> >>> +#include <mach/sunxi/init.h>
> >>> +#include <mach/sunxi/xload.h>
> >>> +#include <mach/sunxi/egon.h>
> >>> +#include <mach/sunxi/rmr_switch.h>
> >>> +#include <mach/sunxi/sun50i-regs.h>
> >>> +#include <mach/sunxi/sunxi-pinctrl.h>
> >>> +
> >>> +#ifdef DEBUG
> >>> +static void debug_led_rgb(int rgb)
> >>> +{
> >>> + void __iomem *piobase = SUN50I_PIO_BASE_ADDR;
> >>> + uint32_t clr, set = 0;
> >>> + int r = rgb & 0xff0000;
> >>> + int g = rgb & 0x00ff00;
> >>> + int b = rgb & 0x0000ff;
> >>> +
> >>> + clr = (1 << 19) | (1 << 18) | (1 << 20);
> >>> + set |= r ? 1 << 19 : 0;
> >>> + set |= g ? 1 << 18 : 0;
> >>> + set |= b ? 1 << 20 : 0;
> >>> +
> >>> + clrsetbits_le32(piobase + PIO_PD_DATA, clr, set);
> >>> +}
> >>> +
> >>> +static void debug_led_init(void)
> >>> +{
> >>> + void __iomem *ccubase = SUN50I_CCU_BASE_ADDR;
> >>> + void __iomem *piobase = SUN50I_PIO_BASE_ADDR;
> >>> +
> >>> + /* PIO clock enable */
> >>> + setbits_le32(ccubase + CCU_BUS_CLK_GATE2, BIT(5));
> >>> + /* LED set output */
> >>> + clrsetbits_le32(piobase + PIO_PD_CFG2, 0x000fff00, 0x00011100);
> >>> +}
> >>> +#else
> >>> +static void debug_led_rgb(int rgb) {}
> >>> +static void debug_led_init(void) {}
> >>> +#endif
> >>> +
> >>> +SUN50I_A64_ENTRY_FUNCTION(start_pine64_pinephone, r0, r1, r2)
> >>> +{
> >>> + extern char __dtb_z_sun50i_a64_pinephone_1_2_start[];
> >>> + void *fdt;
> >>> + u32 size;
> >>> +
> >>> + sunxi_switch_to_aarch64(.text_head_soc_header2, SUN50I_A64_RVBAR_IOMAP);
> >>> +
> >>> + debug_led_init();
> >>> + debug_led_rgb(0xffff00);
> >>> +
> >>> + sun50i_cpu_lowlevel_init();
> >>> + sun50i_uart_setup();
> >>> +
> >>> + relocate_to_current_adr();
> >>> + setup_c();
> >>> +
> >>> + /* Skip SDRAM initialization if we run from it */
> >>> + if (get_pc() < SUN50I_DRAM_ADDR) {
> >>> + size = sun50i_a64_lpddr3_dram_init();
> >>> + if (size == 0) {
> >>> + puts_ll("FAIL: dram init\r\n");
> >>> + goto reset;
> >>> + }
> >>> + puthex_ll(size);
> >>> + putc_ll('\r'); putc_ll('\n');
> >>> + }
> >>
> >> How can we get here with SDRAM uninitialized? Is this for USB or JTAG
> >> boot?
> > Yes this is when not chain loaded, when started directly from USB via fel or
> > via JTAG.
> >
> >>> +
> >>> + puts_ll("now booting\r\n");
> >>> + fdt = __dtb_z_sun50i_a64_pinephone_1_2_start + get_runtime_offset();
> >>> + barebox_arm_entry(SUN50I_DRAM_ADDR, SZ_1G, fdt);
> >>> +
> >>> +reset:
> >>> + debug_led_rgb(0xff0000);
> >>> + sun50i_cpu_lowlevel_reset();
> >>> +}
> >>> +
> >>> +SUN50I_A64_ENTRY_FUNCTION(start_pine64_pinephone_xload, r0, r1, r2)
> >>> +{
> >>> +
> >>> + sunxi_egon_header(.text_head_soc_header0);
> >>> + sunxi_switch_to_aarch64(.text_head_soc_header1, SUN50I_A64_RVBAR_IOMAP);
> >>> +
> >>> + debug_led_init();
> >>> + debug_led_rgb(0xff0000);
> >>> +
> >>> + sun50i_cpu_lowlevel_init();
> >>> + sun50i_uart_setup();
> >>> + debug_led_rgb(0xffff00);
> >>> +
> >>> + relocate_to_current_adr();
> >>> + setup_c();
> >>> +
> >>> + sun50i_a64_lpddr3_dram_init();
> >>> +
> >>> + debug_led_rgb(0xff0000);
> >>> +
> >>
> >> You would have to place code here to continue booting, right? In that
> >> case you should add a comment to let the reader know that there's
> >> something missing here.
> > I forgot to add the code that search for barebox.bin and continue execution
> >
> >>
> >> debug_led_rgb(0xff0000) is the same color you used at the beginning of
> >> the function. Would it make more sense to use a different color?
> > Yes, I'll remove the first red color, I want to reserved it for error conditions.
> >
> >>> + sun50i_cpu_lowlevel_reset();
> >>
> >> Maybe hang() here instead to give the user a chance to see the last
> >> color?
> > Yes, I put the reset so it will re-enter fel so the board could be reprogrammed
> > without needing a powercycle, but that's only true if there are no valid boot
> > entry in eMMC nor SD, IMHO this only makes sense for developpement/debugging.
> >
> >>> +}
> >>> diff --git a/arch/arm/configs/pinephone_defconfig b/arch/arm/configs/pinephone_defconfig
> >>
> >> In the hope that the config is not only suitable for the pinephone
> >> better name it sunxi_v8_defconfig.
> > Yes, currently use this config for the pine64 board, will make this change.
> >
> >>
> >>> +++ b/arch/arm/mach-sunxi/Kconfig
> >>> @@ -1,7 +1,24 @@
> >>> if ARCH_SUNXI
> >>>
> >>> +config ARCH_SUN50I_A64
> >>> + bool
> >>> + select CPU_V8
> >>> + select CPU_SUPPORTS_64BIT_KERNEL
> >>> + select CLOCKSOURCE_ARM_ARCHITECTED_TIMER
> >>> + select PINCTRL_SUN50I_A64
> >>> + select HAS_DEBUG_LL
> >>> + select PBL_RELOCATABLE
> >>> + select PBL_FULLY_PIC
> >>> + help
> >>> + Allwiner A64 (sun50iw1) SoC
> >>
> >> s/Allwiner/Allwinner/
> > ack
> >
> >> Sascha
> >>
> >> --
> >> Pengutronix e.K. | |
> >> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> >> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
> >>
> >
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
>
More information about the barebox
mailing list