Troubles booting kernel with new imx8 board

Ahmad Fatoum a.fatoum at pengutronix.de
Fri May 26 04:44:24 PDT 2023


On 26.05.23 12:46, marc at cpdesign.com.au wrote:
> - boots kernel ok using u-boot (u-boot version provided by solidrun, based on 
> NXP versions)

As Sascha said, logs would be useful. Two more questions:

- Are you using the mainline kernel or NXP's fork?
- Do you have an i.MX8MP or some stripped down variant?

Cheers,
Ahmad

> - I used the same ddr timings from u-boot
> - also using same versions of firmware-imx (8.16) and ATF (2.8)
> 
> Cheers
> Marc
> 
> 
> 
> 
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




More information about the barebox mailing list