[PATCH master] ARM64: configs: multi_v8_defconfig: enable what qemu_virt64_defconfig had
Sascha Hauer
sha at pengutronix.de
Thu May 25 00:31:41 PDT 2023
On Tue, May 23, 2023 at 11:01:01AM +0200, Ahmad Fatoum wrote:
> qemu_virt64_defconfig was dropped before all its contents were folded
> into its multi_v8_defconfig replacement. Reinstate the missing options.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
> arch/arm/configs/multi_v8_defconfig | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/configs/multi_v8_defconfig b/arch/arm/configs/multi_v8_defconfig
> index 8f2d064d1988..d30158d7f880 100644
> --- a/arch/arm/configs/multi_v8_defconfig
> +++ b/arch/arm/configs/multi_v8_defconfig
> @@ -50,6 +50,7 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> CONFIG_STATE=y
> CONFIG_BOOTCHOOSER=y
> CONFIG_RESET_SOURCE=y
> +CONFIG_MACHINE_ID=y
> CONFIG_FASTBOOT_SPARSE=y
> CONFIG_CMD_DMESG=y
> CONFIG_LONGHELP=y
> @@ -59,7 +60,10 @@ CONFIG_CMD_MEMINFO=y
> CONFIG_CMD_ARM_MMUINFO=y
> CONFIG_CMD_REGULATOR=y
> CONFIG_CMD_MMC_EXTCSD=y
> +CONFIG_CMD_POLLER=y
> +CONFIG_CMD_SLICE=y
> CONFIG_CMD_GO=y
> +CONFIG_CMD_LOADB=y
> CONFIG_CMD_RESET=y
> CONFIG_CMD_UIMAGE=y
> CONFIG_CMD_BOOTCHOOSER=y
> @@ -88,9 +92,13 @@ CONFIG_CMD_PING=y
> CONFIG_CMD_TFTP=y
> CONFIG_CMD_ECHO_E=y
> CONFIG_CMD_EDIT=y
> +CONFIG_CMD_LOGIN=y
> CONFIG_CMD_MENU=y
> CONFIG_CMD_MENU_MANAGEMENT=y
> CONFIG_CMD_MENUTREE=y
> +CONFIG_CMD_PASSWD=y
> +CONFIG_CMD_SPLASH=y
> +CONFIG_CMD_FBTEST=y
> CONFIG_CMD_READLINE=y
> CONFIG_CMD_TIMEOUT=y
> CONFIG_CMD_CRC=y
> @@ -103,6 +111,7 @@ CONFIG_CMD_FLASH=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_LED=y
> +CONFIG_CMD_POWEROFF=y
> CONFIG_CMD_SMC=y
> CONFIG_CMD_LED_TRIGGER=y
> CONFIG_CMD_USBGADGET=y
> @@ -113,12 +122,15 @@ CONFIG_CMD_OF_DIFF=y
> CONFIG_CMD_OF_NODE=y
> CONFIG_CMD_OF_PROPERTY=y
> CONFIG_CMD_OF_DISPLAY_TIMINGS=y
> +CONFIG_CMD_OF_FIXUP_STATUS=y
> CONFIG_CMD_OF_OVERLAY=y
> CONFIG_CMD_OFTREE=y
> CONFIG_CMD_TIME=y
> CONFIG_NET=y
> CONFIG_NET_NFS=y
> CONFIG_NET_NETCONSOLE=y
> +CONFIG_NET_SNTP=y
> +CONFIG_NET_FASTBOOT=y
> CONFIG_OF_BAREBOX_DRIVERS=y
> CONFIG_OF_BAREBOX_ENV_IN_FS=y
> CONFIG_OF_OVERLAY_LIVE=y
> @@ -151,6 +163,9 @@ CONFIG_I2C_GPIO=y
> CONFIG_I2C_IMX=y
> CONFIG_I2C_RK3X=y
> CONFIG_MTD=y
> +CONFIG_MTD_CONCAT=y
> +CONFIG_DRIVER_CFI=y
> +CONFIG_CFI_BUFFER_WRITE=y
> CONFIG_VIRTIO_BLK=y
> CONFIG_USB_HOST=y
> CONFIG_USB_IMX_CHIPIDEA=y
> @@ -162,6 +177,10 @@ CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_SERIAL=y
> CONFIG_USB_GADGET_FASTBOOT=y
> CONFIG_USB_GADGET_MASS_STORAGE=y
> +CONFIG_VIDEO=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +CONFIG_DRIVER_VIDEO_BOCHS_PCI=y
> +CONFIG_SOUND=y
> CONFIG_MCI=y
> CONFIG_MCI_STARTUP=y
> CONFIG_MCI_MMC_BOOT_PARTITIONS=y
> @@ -187,12 +206,14 @@ CONFIG_HWRNG=y
> CONFIG_HW_RANDOM_VIRTIO=y
> CONFIG_GPIO_PCA953X=y
> CONFIG_GPIO_ZYNQ=y
> +CONFIG_NVMEM_RMEM=y
> CONFIG_IMX_OCOTP=y
> CONFIG_RAVE_SP_EEPROM=y
> CONFIG_REGULATOR=y
> CONFIG_REGULATOR_FIXED=y
> CONFIG_REGULATOR_RK808=y
> CONFIG_RESET_IMX7=y
> +CONFIG_PCI_ECAM_GENERIC=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_DRV_DS1307=y
> CONFIG_FIRMWARE_ZYNQMP_FPGA=y
> @@ -201,7 +222,9 @@ CONFIG_USB_NOP_XCEIV=y
> CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
> CONFIG_ROCKCHIP_IODOMAIN=y
> +CONFIG_NVMEM_REBOOT_MODE=y
> CONFIG_VIRTIO_MMIO=y
> +CONFIG_VIRTIO_PCI=y
> CONFIG_FS_CRAMFS=y
> CONFIG_FS_EXT4=y
> CONFIG_FS_TFTP=y
> @@ -211,5 +234,7 @@ CONFIG_FS_FAT_WRITE=y
> CONFIG_FS_FAT_LFN=y
> CONFIG_FS_BPKFS=y
> CONFIG_FS_UIMAGEFS=y
> +CONFIG_FS_PSTORE=y
> +CONFIG_FS_PSTORE_CONSOLE=y
> CONFIG_FS_RATP=y
> CONFIG_LZO_DECOMPRESS=y
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list