[PATCH 12/27] ARM: mmu: move dma_sync_single_for_device to extra file

[Sascha Hauer]

On Fri, May 12, 2023 at 08:30:01PM +0200, Ahmad Fatoum wrote:
> On 12.05.23 13:09, Sascha Hauer wrote:
> > The next patch merges the mmu.c files with their corresponding
> > mmu-early.c files. Before doing that move functions which can't
> > be compiled for PBL out to extra files.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > ---
> >  arch/arm/cpu/Makefile |  1 +
> >  arch/arm/cpu/dma_32.c | 20 ++++++++++++++++++++
> >  arch/arm/cpu/dma_64.c | 16 ++++++++++++++++
> >  arch/arm/cpu/mmu_32.c | 18 ------------------
> >  arch/arm/cpu/mmu_64.c | 13 -------------
> >  5 files changed, 37 insertions(+), 31 deletions(-)
> >  create mode 100644 arch/arm/cpu/dma_32.c
> >  create mode 100644 arch/arm/cpu/dma_64.c
> > 
> > diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
> > index fef2026da5..cd5f36eb49 100644
> > --- a/arch/arm/cpu/Makefile
> > +++ b/arch/arm/cpu/Makefile
> > @@ -4,6 +4,7 @@ obj-y += cpu.o
> >  
> >  obj-$(CONFIG_ARM_EXCEPTIONS) += exceptions_$(S64_32).o interrupts_$(S64_32).o
> >  obj-$(CONFIG_MMU) += mmu_$(S64_32).o mmu-common.o
> > +obj-$(CONFIG_MMU) += dma_$(S64_32).o
> >  obj-pbl-y += lowlevel_$(S64_32).o
> >  obj-pbl-$(CONFIG_MMU) += mmu-early_$(S64_32).o
> >  obj-pbl-$(CONFIG_CPU_32v7) += hyp.o
> > diff --git a/arch/arm/cpu/dma_32.c b/arch/arm/cpu/dma_32.c
> > new file mode 100644
> > index 0000000000..a66aa26b9b
> > --- /dev/null
> > +++ b/arch/arm/cpu/dma_32.c
> > @@ -0,0 +1,20 @@
> > +#include <dma.h>
> > +#include <asm/mmu.h>
> > +
> > +void dma_sync_single_for_device(dma_addr_t address, size_t size,
> > +				enum dma_data_direction dir)
> > +{
> > +	/*
> > +	 * FIXME: This function needs a device argument to support non 1:1 mappings
> > +	 */
> > +
> > +	if (dir == DMA_FROM_DEVICE) {
> > +		__dma_inv_range(address, address + size);
> > +		if (outer_cache.inv_range)
> > +			outer_cache.inv_range(address, address + size);
> 
> I know this is unrelated to your series, but this is wrong. The outermost
> cache must be be invalidated before L1. Otherwise we could have this
> unlucky constellation:
> 
>   - CPU is invalidating L1
>   - HW prefetcher wants to load something into L1
>   - Stale data in L2 is loaded into L1
>   - Only now CPU invalidates L2

L1 is invalidated after the DMA transfer in dma_sync_single_for_cpu(),
so stale data in L1 shouldn't be a problem.

However, the prefetcher could cause stale entries in L2 during the DMA
transfer, so we have to invalidate that as well after the transfer.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |