[PATCH v1 4/4] arm: dts: stm32mp151-prtt1l: Configure USB gadget FIFOs for multiple gadgets support

[Ahmad Fatoum]

Hello Oleksij,

On 03.05.23 12:19, Oleksij Rempel wrote:
> This patch configures the USB gadget FIFOs of PRTT1L boards to support
> multiple gadgets at the same time. The configuration was tested with the
> "usbgadget -S '/dev/mmc1(mmc1)' -s -A '' -b" command.

What's the downside on configuring the FIFO this way globally
in stm32mp151.dtsi? Should the same be done for Linux?

> Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
> ---
>  arch/arm/dts/stm32mp151-prtt1l.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/dts/stm32mp151-prtt1l.dtsi b/arch/arm/dts/stm32mp151-prtt1l.dtsi
> index 98a9c20d6d..fecd068fc0 100644
> --- a/arch/arm/dts/stm32mp151-prtt1l.dtsi
> +++ b/arch/arm/dts/stm32mp151-prtt1l.dtsi
> @@ -56,6 +56,7 @@
>  	phys = <&usbphyc_port1 0>;
>  	phy-names = "usb2-phy";
>  	status = "okay";
> +	g-tx-fifo-size = <128 128 128 16>;
>  };
>  
>  &usbphyc {

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |