[PATCH] usb: dwc3: gadget: lower informal user notifaction dequeue operation

Marco Felsch m.felsch at pengutronix.de
Fri Mar 24 01:39:14 PDT 2023


On 23-03-24, Sascha Hauer wrote:
> On Thu, Mar 23, 2023 at 06:30:16PM +0100, Marco Felsch wrote:
> > I encounted the below error message on the i.MX8MP if a fastboot gadget
> > was up and running and barebox does a reset() or boots the kernel:
> > 
> >   ERROR: dwc3 38100000.usb at 38100000.of: request 00000000bfd91568 was not queued to ep1out
> > 
> > Printing an error message during usb_ep_dequeue() is more confusing than
> > helpful since the usb_ep_dequeue() could be called during unbind() like
> > it is done for fastboot. Lower the dev_err() message to dev_dbg() to
> > keep the message for developers.
> 
> I saw this message as well, but I deliberately kept it in. Motivated by
> this patch I had a look after it. The correct solution is to not dequeue
> requests in fastboot_unbind(). fastboot_disable() will already be called
> which calls usb_ep_disable() which will dequeue all outstanding
> requests.

Linux mainline did mention usb_ep_disbale() as well, I wasn't aware of
this function. This seems to be the correct fix, ableit linux maintainer
also says that this error is not critical and we shouldn't use dev_err()
for non critical messages.

> See the patch I just sent.

Thanks :)

Regards,
  Marco


> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 



More information about the barebox mailing list