[PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20

[Sam Ravnborg]

Hi all.

Correcting myself here.
> > 
> > Super interesting about the A9263 setup code. I missed it so far. Does
> > that mean that barebox can replace the at91bootstrap?
> Yes. The patch series I pointed at generates a bare variant that I
> successfully used to boot my board direct from ROMBOOT.
> It is a direct replacement for at91bootstrap and loads barebox as the
> next step bootloader.
The above is entirely correct - as the barebox variant supports booting from
SD card only, where at91bootstrap support additional boot sources.

Doable, but I did not have the need, so I did not look into it.


	Sam