[PATCH 02/18] usb: gadget: drop gadget_chips.h
Sascha Hauer
s.hauer at pengutronix.de
Mon Mar 20 08:29:25 PDT 2023
gadget_chips.h is mostly unused and no longer present in upstream Linux,
so drop it from barebox as well. The only thing we still need is
gadget_is_pxa() which is added to epautoconf.c directly.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
drivers/usb/gadget/epautoconf.c | 42 +----------------------
drivers/usb/gadget/f_acm.c | 1 -
drivers/usb/gadget/f_serial.c | 1 -
drivers/usb/gadget/gadget_chips.h | 56 -------------------------------
drivers/usb/gadget/serial.c | 1 -
5 files changed, 1 insertion(+), 100 deletions(-)
delete mode 100644 drivers/usb/gadget/gadget_chips.h
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index e9f13f4262..2f1b9d1a0b 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -14,7 +14,7 @@
#include <usb/ch9.h>
#include <usb/gadget.h>
-#include "gadget_chips.h"
+#define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name))
/*
* This should work with endpoints from controller drivers sharing the
@@ -182,18 +182,6 @@ ep_matches (
return 1;
}
-static struct usb_ep *
-find_ep (struct usb_gadget *gadget, const char *name)
-{
- struct usb_ep *ep;
-
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (0 == strcmp (ep->name, name))
- return ep;
- }
- return NULL;
-}
-
/**
* usb_ep_autoconfig_ss() - choose an endpoint matching the ep
* descriptor and ep companion descriptor
@@ -249,34 +237,6 @@ struct usb_ep *usb_ep_autoconfig_ss(
type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
- /* First, apply chip-specific "best usage" knowledge.
- * This might make a good usb_gadget_ops hook ...
- */
- if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
- /* ep-e, ep-f are PIO with only 64 byte fifos */
- ep = find_ep (gadget, "ep-e");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
- goto found_ep;
- ep = find_ep (gadget, "ep-f");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
- goto found_ep;
-
- } else if (gadget_is_goku (gadget)) {
- if (USB_ENDPOINT_XFER_INT == type) {
- /* single buffering is enough */
- ep = find_ep(gadget, "ep3-bulk");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
- goto found_ep;
- } else if (USB_ENDPOINT_XFER_BULK == type
- && (USB_DIR_IN & desc->bEndpointAddress)) {
- /* DMA may be available */
- ep = find_ep(gadget, "ep2-bulk");
- if (ep && ep_matches(gadget, ep, desc,
- ep_comp))
- goto found_ep;
- }
- }
-
/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
if (ep_matches(gadget, ep, desc, ep_comp))
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 42438947c1..3d2595edd7 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -19,7 +19,6 @@
#include <usb/composite.h>
#include "u_serial.h"
-#include "gadget_chips.h"
/*
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 33cf54dc1c..494f6c872e 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -12,7 +12,6 @@
#include <linux/err.h>
#include "u_serial.h"
-#include "gadget_chips.h"
/*
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
deleted file mode 100644
index 78e0601027..0000000000
--- a/drivers/usb/gadget/gadget_chips.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * USB device controllers have lots of quirks. Use these macros in
- * gadget drivers or other code that needs to deal with them, and which
- * autoconfigures instead of using early binding to the hardware.
- *
- * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
- * some config file that gets updated as new hardware is supported.
- * (And avoiding all runtime comparisons in typical one-choice configs!)
- *
- * NOTE: some of these controller drivers may not be available yet.
- * Some are available on 2.4 kernels; several are available, but not
- * yet pushed in the 2.6 mainline tree.
- */
-
-#ifndef __GADGET_CHIPS_H
-#define __GADGET_CHIPS_H
-
-#include <usb/gadget.h>
-
-/*
- * NOTICE: the entries below are alphabetical and should be kept
- * that way.
- *
- * Always be sure to add new entries to the correct position or
- * accept the bashing later.
- *
- * If you have forgotten the alphabetical order let VIM/EMACS
- * do that for you.
- */
-#define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name))
-#define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name))
-#define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name))
-#define gadget_is_net2280(g) (!strcmp("net2280", (g)->name))
-#define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name))
-#define gadget_is_pxa27x(g) (!strcmp("pxa27x_udc", (g)->name))
-
-/**
- * gadget_supports_altsettings - return true if altsettings work
- * @gadget: the gadget in question
- */
-static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
-{
- /* PXA 21x/25x/26x has no altsettings at all */
- if (gadget_is_pxa(gadget))
- return false;
-
- /* PXA 27x and 3xx have *broken* altsetting support */
- if (gadget_is_pxa27x(gadget))
- return false;
-
- /* Everything else is *presumably* fine ... */
- return true;
-}
-
-#endif /* __GADGET_CHIPS_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 0ef2665b69..6321f3f207 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -18,7 +18,6 @@
#include <asm/byteorder.h>
#include "u_serial.h"
-#include "gadget_chips.h"
/* Defines */
--
2.30.2
More information about the barebox
mailing list