[PATCH 1/2] doc: user: barebox: bootz instead of bootm

[Stefan Kerkmann]

barebox-dt-2nd.img is in the `zImage` format, therefore use the proper
command for booting on 32-bit platforms.
---
 Documentation/user/barebox.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/user/barebox.rst b/Documentation/user/barebox.rst
index 80f0f96a98..f4e600bde0 100644
--- a/Documentation/user/barebox.rst
+++ b/Documentation/user/barebox.rst
@@ -212,7 +212,7 @@ like a Linux kernel that is passed an external device tree. For example:
 
   U-Boot: tftp $kernel_addr barebox-dt-2nd.img
   U-Boot: tftp $fdt_addr my-board.dtb
-  U-Boot: bootm $kernel_addr - $fdt_addr # On 32-bit ARM
+  U-Boot: bootz $kernel_addr - $fdt_addr # On 32-bit ARM
   U-Boot: booti $kernel_addr - $fdt_addr # for other platforms
 
 For non-DT enabled-bootloaders or other architectures, often the normal barebox

-- 
2.39.2