[PATCH] ARM: rpi: add CM4S device id

[Ahmad Fatoum]

Hello Sebastien,

On 14.12.23 17:35, Sebastien Bourdelin wrote:
> Introduce the device id for the raspberry CM4S accordingly to [1].
> 
>  [1]: https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-revision-codes
> 
> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin at rtone.fr>

Reviewed-by: Ahmad Fatoum <a.fatoum at pengutronix.de>

One comment below:

> +	}, {
> +		.hw_id = BCM2711_BOARD_REV_CM4_S,
> +		.init = rpi_eth_init,

Did you check that this is equally applicable on the RPI4?
This ends up calling rpi_get_usbethaddr(), but that one
calls GET_MAC_ADDRESS on the mbox interface, so I am not
sure whether this is applicable to bcmgenet or not.

Cheers,
Ahmad

>  	}, {
>  		.hw_id = U8_MAX
>  	},
> @@ -682,6 +685,7 @@ static const struct of_device_id rpi_of_match[] = {
>  	/* BCM2711 based Boards */
>  	{ .compatible = "raspberrypi,4-model-b", .data = rpi_4_ids },
>  	{ .compatible = "raspberrypi,4-compute-module", .data = rpi_4_ids },
> +	{ .compatible = "raspberrypi,4-compute-module-s", .data = rpi_4_ids },
>  	{ .compatible = "raspberrypi,400", .data = rpi_4_ids },
>  
>  	{ /* sentinel */ },
> diff --git a/include/mach/bcm283x/mbox.h b/include/mach/bcm283x/mbox.h
> index 908ba17dba..cf5143673a 100644
> --- a/include/mach/bcm283x/mbox.h
> +++ b/include/mach/bcm283x/mbox.h
> @@ -175,6 +175,7 @@ struct bcm2835_mbox_tag_hdr {
>  #define BCM2837B0_BOARD_REV_ZERO_2	0x12
>  #define BCM2711_BOARD_REV_400		0x13
>  #define BCM2711_BOARD_REV_CM4		0x14
> +#define BCM2711_BOARD_REV_CM4_S		0x15
>  
>  struct bcm2835_mbox_tag_get_board_rev {
>  	struct bcm2835_mbox_tag_hdr tag_hdr;

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |