[PATCH] crypto: crc32: make crc32 available in PBL

[Ahmad Fatoum]

On 29.08.23 12:29, Ahmad Fatoum wrote:
> On 29.08.23 11:28, Johannes Zink wrote:
>> crc32 may be required in PBL for checking data integrity. Add
>> CONFIG_CRC32_EARLY to kconfig which allows adding crc32 also in the PBL.
>>
>> As the PBL has no dynamic allocation, do not use dynamic CRC table
>> generation when CRC32 is added in PBL.
>>
>> Signed-off-by: Johannes Zink <j.zink at pengutronix.de>
>> ---
>> To: Barebox Mailing List <barebox at lists.infradead.org>
>> Cc: Johannes Zink <j.zink at pengutronix.de>
>> Cc: patchwork-jzi at pengutronix.de
>> ---
>>  crypto/Kconfig  | 3 +++
>>  crypto/Makefile | 1 +
>>  crypto/crc32.c  | 6 +++---
>>  3 files changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/crypto/Kconfig b/crypto/Kconfig
>> index 04e5ef43705b..6e18b5868061 100644
>> --- a/crypto/Kconfig
>> +++ b/crypto/Kconfig
>> @@ -5,6 +5,9 @@ menu "Crypto support"
>>  config CRC32
>>  	bool
>>  
>> +config CRC32_EARLY
>> +	bool
>> +
>>  config CRC_ITU_T
>>  	bool
>>  
>> diff --git a/crypto/Makefile b/crypto/Makefile
>> index 22035d4f69ee..24e1f3d91797 100644
>> --- a/crypto/Makefile
>> +++ b/crypto/Makefile
>> @@ -11,6 +11,7 @@ obj-$(CONFIG_DIGEST_SHA1_GENERIC)	+= sha1.o
>>  obj-$(CONFIG_DIGEST_SHA224_GENERIC)	+= sha2.o
>>  obj-$(CONFIG_DIGEST_SHA256_GENERIC)	+= sha2.o
>>  pbl-y					+= sha2.o digest.o
>> +lwl-$(CONFIG_CRC32_EARLY)		+= crc32.o
> 
> pbl-obj- is the correct prefix. lwl- means pbl- if we have PBL
> support at all and obj- otherwise (for legacy systems without PBL),
> while pbl-obj- is equivalent to duplicating the line once with pbl-
> and once with obj-

s/pbl-obj-/obj-pbl-/ :)

> 
>>  obj-$(CONFIG_DIGEST_SHA384_GENERIC)	+= sha4.o
>>  obj-$(CONFIG_DIGEST_SHA512_GENERIC)	+= sha4.o
>>  obj-y	+= memneq.o
>> diff --git a/crypto/crc32.c b/crypto/crc32.c
>> index 95cb2212db2b..284d39351682 100644
>> --- a/crypto/crc32.c
>> +++ b/crypto/crc32.c
>> @@ -22,7 +22,7 @@
>>  #define STATIC static inline
>>  #endif
>>  
>> -#ifdef CONFIG_DYNAMIC_CRC_TABLE
>> +#if defined(CONFIG_DYNAMIC_CRC_TABLE) && !defined(__PBL__)
> 
> You could also replace the dynamic allocation with a static array initialized
> to zero. That way you can have a dynamic crc table even in PBL without affecting
> image size as the BSS is not part of the image.
> 
>>  
>>  static uint32_t *crc_table;
>>  
>> @@ -145,7 +145,7 @@ STATIC uint32_t crc32(uint32_t crc, const void *_buf, unsigned int len)
>>  {
>>      const unsigned char *buf = _buf;
>>  
>> -#ifdef CONFIG_DYNAMIC_CRC_TABLE
>> +#if defined(CONFIG_DYNAMIC_CRC_TABLE) && !defined(__PBL__)
>>  	if (!crc_table)
>>  		make_crc_table();
>>  #endif
>> @@ -171,7 +171,7 @@ STATIC uint32_t crc32_no_comp(uint32_t crc, const void *_buf, unsigned int len)
>>  {
>>     const unsigned char *buf = _buf;
>>  
>> -#ifdef CONFIG_DYNAMIC_CRC_TABLE
>> +#if defined(CONFIG_DYNAMIC_CRC_TABLE) && !defined(__PBL__)
>>  	if (!crc_table)
>>  		make_crc_table();
>>  #endif
>>
>> ---
>> base-commit: bef38b18eeb5d2f1fac334fb8b831e47261e099c
>> change-id: 20230829-crc32_in_pbl-4d824629d4e2
>>
>> Best regards,
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |