[PATCH v2 7/7] arm: rockchip: rk3568-bpi-r2pro: use common method rk3568_start

[Michael Riesch]

After the removal of the IO domain configuration code, the common
low-level initialization  method rk3568_start can be used to remove
code duplication.

Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>
---
 .../rockchip-rk3568-bpi-r2pro/lowlevel.c      | 33 +------------------
 1 file changed, 1 insertion(+), 32 deletions(-)

diff --git a/arch/arm/boards/rockchip-rk3568-bpi-r2pro/lowlevel.c b/arch/arm/boards/rockchip-rk3568-bpi-r2pro/lowlevel.c
index 36f7acd7d0..8b04dccc1e 100644
--- a/arch/arm/boards/rockchip-rk3568-bpi-r2pro/lowlevel.c
+++ b/arch/arm/boards/rockchip-rk3568-bpi-r2pro/lowlevel.c
@@ -1,43 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include <common.h>
-#include <linux/sizes.h>
-#include <asm/barebox-arm-head.h>
 #include <asm/barebox-arm.h>
-#include <mach/hardware.h>
-#include <mach/atf.h>
-#include <debug_ll.h>
 #include <mach/rockchip.h>
 
 extern char __dtb_rk3568_bpi_r2_pro_start[];
 
-static noinline void rk3568_start(void)
-{
-	void *fdt;
-
-	fdt = __dtb_rk3568_bpi_r2_pro_start;
-
-	if (current_el() == 3) {
-		rk3568_lowlevel_init();
-		rk3568_atf_load_bl31(fdt);
-		/* not reached */
-	}
-
-	barebox_arm_entry(RK3568_DRAM_BOTTOM, 0x80000000 - RK3568_DRAM_BOTTOM, fdt);
-}
-
 ENTRY_FUNCTION(start_rk3568_bpi_r2pro, r0, r1, r2)
 {
-	/*
-	 * Image execution starts at 0x0, but this is used for ATF and
-	 * OP-TEE later, so move away from here.
-	 */
-	if (current_el() == 3)
-		relocate_to_adr_full(RK3568_BAREBOX_LOAD_ADDRESS);
-	else
-		relocate_to_current_adr();
-
-	setup_c();
-
-	rk3568_start();
+	rk3568_start(__dtb_rk3568_bpi_r2_pro_start);
 }
-- 
2.30.2