[PATCH] aiodev: port Linux imx7d-adc driver
Sascha Hauer
sha at pengutronix.de
Mon Oct 24 01:12:42 PDT 2022
On Thu, Oct 20, 2022 at 05:28:53PM +0200, Ahmad Fatoum wrote:
> The i.MX7 has two ADCs of 16 channels each. Port the Linux v6.0 driver
> of the peripheral to make them usable in barebox. This can be useful
> for board type/revision detection that employs voltage dividers.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
> drivers/aiodev/Kconfig | 8 +
> drivers/aiodev/Makefile | 1 +
> drivers/aiodev/imx7d_adc.c | 466 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 475 insertions(+)
> create mode 100644 drivers/aiodev/imx7d_adc.c
>
> diff --git a/drivers/aiodev/Kconfig b/drivers/aiodev/Kconfig
> index 6bd697702ecf..5c8706ffef4a 100644
> --- a/drivers/aiodev/Kconfig
> +++ b/drivers/aiodev/Kconfig
> @@ -65,4 +65,12 @@ config ROCKCHIP_SARADC
> help
> Support for Successive Approximation Register (SAR) ADC in Rockchip
> SoCs.
> +
> +config IMX7D_ADC
> + tristate "Freescale IMX7D ADC driver"
> + depends on ARCH_IMX7 || COMPILE_TEST
> + depends on OFDEVICE
> + help
> + Say yes here to build support for IMX7D ADC.
> +
> endif
> diff --git a/drivers/aiodev/Makefile b/drivers/aiodev/Makefile
> index 06a63b0d2d78..9cb11605ed09 100644
> --- a/drivers/aiodev/Makefile
> +++ b/drivers/aiodev/Makefile
> @@ -9,3 +9,4 @@ obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
> obj-$(CONFIG_AM335X_ADC) += am335x_adc.o
> obj-$(CONFIG_STM32_ADC) += stm32-adc.o stm32-adc-core.o
> obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
> +obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
> diff --git a/drivers/aiodev/imx7d_adc.c b/drivers/aiodev/imx7d_adc.c
> new file mode 100644
> index 000000000000..9820aaff1ac4
> --- /dev/null
> +++ b/drivers/aiodev/imx7d_adc.c
> @@ -0,0 +1,466 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Freescale i.MX7D ADC driver
> + *
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <io.h>
> +#include <linux/printk.h>
> +#include <driver.h>
> +#include <init.h>
> +#include <linux/kernel.h>
> +#include <linux/bitops.h>
> +#include <regulator.h>
> +#include <linux/barebox-wrapper.h>
> +
> +#include <linux/iopoll.h>
> +#include <aiodev.h>
> +
> +/* ADC register */
> +#define IMX7D_REG_ADC_CH_A_CFG1 0x00
> +#define IMX7D_REG_ADC_CH_A_CFG2 0x10
> +#define IMX7D_REG_ADC_CH_B_CFG1 0x20
> +#define IMX7D_REG_ADC_CH_B_CFG2 0x30
> +#define IMX7D_REG_ADC_CH_C_CFG1 0x40
> +#define IMX7D_REG_ADC_CH_C_CFG2 0x50
> +#define IMX7D_REG_ADC_CH_D_CFG1 0x60
> +#define IMX7D_REG_ADC_CH_D_CFG2 0x70
These defines are unused.
> +#define IMX7D_REG_ADC_CH_SW_CFG 0x80
> +#define IMX7D_REG_ADC_TIMER_UNIT 0x90
> +#define IMX7D_REG_ADC_DMA_FIFO 0xa0
> +#define IMX7D_REG_ADC_FIFO_STATUS 0xb0
> +#define IMX7D_REG_ADC_INT_SIG_EN 0xc0
> +#define IMX7D_REG_ADC_INT_EN 0xd0
> +#define IMX7D_REG_ADC_INT_STATUS 0xe0
> +#define IMX7D_REG_ADC_CHA_B_CNV_RSLT 0xf0
> +#define IMX7D_REG_ADC_CHC_D_CNV_RSLT 0x100
> +#define IMX7D_REG_ADC_CH_SW_CNV_RSLT 0x110
> +#define IMX7D_REG_ADC_DMA_FIFO_DAT 0x120
> +#define IMX7D_REG_ADC_ADC_CFG 0x130
> +
> +#define IMX7D_REG_ADC_CHANNEL_CFG2_BASE 0x10
> +#define IMX7D_EACH_CHANNEL_REG_OFFSET 0x20
Better something like:
#define IMX7D_REG_ADC_CFG1(ch) ((ch) * 0x20)
#define IMX7D_REG_ADC_CFG2(ch) ((ch) * 0x20 + 0x10)
> +static void imx7d_adc_feature_config(struct imx7d_adc *info)
> +{
> + info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4;
> + info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32;
> + info->adc_feature.core_time_unit = 1;
> +}
> +
> +static void imx7d_adc_sample_rate_set(struct imx7d_adc *info)
> +{
> + struct imx7d_adc_feature *adc_feature = &info->adc_feature;
> + struct imx7d_adc_analogue_core_clk adc_analogure_clk;
s/adc_analogure_clk/adc_analogue_clk/
> + u32 i;
unsigned int?
> + u32 tmp_cfg1;
> + u32 sample_rate = 0;
> +
> + /*
> + * Before sample set, disable channel A,B,C,D. Here we
> + * clear the bit 31 of register REG_ADC_CH_A\B\C\D_CFG1.
> + */
> + for (i = 0; i < 4; i++) {
> + tmp_cfg1 =
> + readl(info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
> + tmp_cfg1 &= ~IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN;
> + writel(tmp_cfg1,
> + info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
> + }
> +
> + adc_analogure_clk = imx7d_adc_analogue_clk[adc_feature->clk_pre_div];
> + sample_rate |= adc_analogure_clk.reg_config;
> + info->pre_div_num = adc_analogure_clk.pre_div;
> +
> + sample_rate |= adc_feature->core_time_unit;
> + writel(sample_rate, info->regs + IMX7D_REG_ADC_TIMER_UNIT);
> +}
> +
> +static void imx7d_adc_hw_init(struct imx7d_adc *info)
> +{
> + u32 cfg;
> +
> + /* power up and enable adc analogue core */
> + cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
> + cfg &= ~(IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN |
> + IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN);
> + cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_EN;
> + writel(cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
> +
> +#if 0
> + /* enable channel A,B,C,D interrupt */
> + writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN,
> + info->regs + IMX7D_REG_ADC_INT_SIG_EN);
> + writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN,
> + info->regs + IMX7D_REG_ADC_INT_EN);
> +#endif
> +
> + imx7d_adc_sample_rate_set(info);
> +}
> +
> +static void imx7d_adc_channel_set(struct imx7d_adc *info, u32 channel)
> +{
> + u32 cfg1 = 0;
> + u32 cfg2;
> +
> + /* the channel choose single conversion, and enable average mode */
> + cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN |
> + IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE |
> + IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN);
> +
> + /*
> + * physical channel 0 chose logical channel A
> + * physical channel 1 chose logical channel B
> + * physical channel 2 chose logical channel C
> + * physical channel 3 chose logical channel D
> + */
> + cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(channel);
> +
> + /*
> + * read register REG_ADC_CH_A\B\C\D_CFG2, according to the
> + * channel chosen
> + */
> + cfg2 = readl(info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel +
> + IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
> +
> + cfg2 |= imx7d_adc_average_num[info->adc_feature.avg_num];
> +
> + /*
> + * write the register REG_ADC_CH_A\B\C\D_CFG2, according to
> + * the channel chosen
> + */
> + writel(cfg2, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel +
> + IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
> + writel(cfg1, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel);
> +}
> +
> +static u16 imx7d_adc_read_data(struct imx7d_adc *info, u32 channel)
> +{
> + u32 value;
> +
> + /*
> + * channel A and B conversion result share one register,
> + * bit[27~16] is the channel B conversion result,
> + * bit[11~0] is the channel A conversion result.
> + * channel C and D is the same.
> + */
> + if (channel < 2)
> + value = readl(info->regs + IMX7D_REG_ADC_CHA_B_CNV_RSLT);
> + else
> + value = readl(info->regs + IMX7D_REG_ADC_CHC_D_CNV_RSLT);
> + if (channel & 0x1) /* channel B or D */
> + value = (value >> 16) & 0xFFF;
> + else /* channel A or C */
> + value &= 0xFFF;
> +
> + return value;
> +}
> +
> +static int imx7d_adc_isr(struct imx7d_adc *info, u32 channel)
> +{
> + int ret = -EAGAIN;
> + int status;
> +
> + status = readl(info->regs + IMX7D_REG_ADC_INT_STATUS);
> + if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS) {
> + ret = imx7d_adc_read_data(info, channel);
Returning the adc data from a function named _isr in conjunction with
using a variable named 'ret' for both error codes and adc data makes the
code unnecessarily hard to follow. Could you refactor a bit to make this
more readable?
> +
> + /*
> + * The register IMX7D_REG_ADC_INT_STATUS can't clear
> + * itself after read operation, need software to write
> + * 0 to the related bit. Here we clear the channel A/B/C/D
> + * conversion finished flag.
> + */
> + status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS;
> + writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
> + }
> +
> + /*
> + * If the channel A/B/C/D conversion timeout, report it and clear these
> + * timeout flags.
> + */
> + if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT) {
> + dev_err(info->dev,
> + "ADC got conversion time out interrupt: 0x%08x\n",
> + status);
> + status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT;
> + writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
> + ret = -ETIMEDOUT;
> + }
> +
> + return ret;
> +}
> +
> +
> +static int imx7d_adc_read_raw(struct aiochannel *chan, int *data)
> +{
> + struct imx7d_adc *info = container_of(chan->aiodev, struct imx7d_adc, aiodev);
> + u64 raw64, start;
> + u32 channel;
> + int ret;
> +
> + channel = chan->index & 0x03;
You are registering 16 channels, but here you limit to a maximum of four
channels.
> + imx7d_adc_channel_set(info, channel);
> +
> + start = get_time_ns();
> + do {
> + if (is_timeout(start, IMX7D_ADC_TIMEOUT_NSEC)) {
> + ret = -ETIMEDOUT;
> + break;
> + }
> +
> + ret = imx7d_adc_isr(info, channel);
> + } while (ret == -EAGAIN);
> +
> + if (ret < 0)
> + return ret;
> +
> + raw64 = ret;
> + raw64 *= info->vref_uv;
> + raw64 = div_u64(raw64, 1000);
> + *data = div_u64(raw64, (1 << 12));
> +
> + return 0;
> +}
> +
> +static const struct of_device_id imx7d_adc_match[] = {
> + { .compatible = "fsl,imx7d-adc", },
> + { /* sentinel */ }
> +};
> +
> +static void imx7d_adc_power_down(struct imx7d_adc *info)
> +{
> + u32 adc_cfg;
> +
> + adc_cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
> + adc_cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN |
> + IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN;
> + adc_cfg &= ~IMX7D_REG_ADC_ADC_CFG_ADC_EN;
> + writel(adc_cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
> +}
> +
> +static int imx7d_adc_enable(struct imx7d_adc *info)
> +{
> + struct device_d *dev = info->dev;
> + int ret;
> +
> + ret = regulator_enable(info->vref);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Can't enable adc reference top voltage\n");
> +
> + ret = clk_enable(info->clk);
> + if (ret) {
> + regulator_disable(info->vref);
> + return dev_err_probe(dev, ret, "Could not enable clock.\n");
> + }
> +
> + imx7d_adc_hw_init(info);
> +
> + ret = regulator_get_voltage(info->vref);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "can't get vref-supply value\n");
> +
> + info->vref_uv = ret;
> + return 0;
> +}
> +
> +static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info)
> +{
> + u32 analogue_core_clk;
> + u32 core_time_unit = info->adc_feature.core_time_unit;
> + u32 tmp;
> +
> + analogue_core_clk = IMX7D_ADC_INPUT_CLK / info->pre_div_num;
> + tmp = (core_time_unit + 1) * 6;
> +
> + return analogue_core_clk / tmp;
> +}
> +
> +static void imx7d_adc_devinfo(struct device_d *dev)
> +{
> + struct imx7d_adc *info = dev->priv;
> +
> + if (info->aiodev_info)
> + info->aiodev_info(dev);
> +
> + printf("Sample Rate: %u\n", imx7d_adc_get_sample_rate(info));
> +}
> +
> +static int imx7d_adc_probe(struct device_d *dev)
> +{
> + struct aiodevice *aiodev;
> + struct imx7d_adc *info;
> + int ret, i;
> +
> + info = xzalloc(sizeof(*info));
> +
> + info->dev = dev;
> +
> + info->clk = clk_get(dev, "adc");
> + if (IS_ERR(info->clk))
> + return dev_err_probe(dev, PTR_ERR(info->clk), "Failed getting clock\n");
> +
> + info->vref = regulator_get(dev, "vref");
> + if (IS_ERR(info->vref))
> + return dev_err_probe(dev, PTR_ERR(info->vref),
> + "Failed getting reference voltage\n");
> +
> + info->regs = dev_request_mem_region(dev, 0);
> + if (IS_ERR(info->regs))
> + return dev_err_probe(dev, PTR_ERR(info->regs),
> + "Failed to get memory region\n");
> +
> + dev->priv = aiodev = &info->aiodev;
> +
> + aiodev->num_channels = 16;
> + aiodev->hwdev = dev;
> + aiodev->read = imx7d_adc_read_raw;
> + aiodev->channels = xmalloc(aiodev->num_channels * sizeof(aiodev->channels[0]));;
Use xzalloc to make sure all fields are initialized.
One semicolon too much at the end of this line.
> +
> + for (i = 0; i < aiodev->num_channels; i++) {
> + aiodev->channels[i] = &info->aiochan[i];
> + info->aiochan[i].unit = "mV";
> + }
> +
> + imx7d_adc_feature_config(info);
> +
> + ret = imx7d_adc_enable(info);
> + if (ret)
> + return ret;
> +
> + ret = aiodevice_register(aiodev);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed to register aiodev\n");
> +
> + info->aiodev_info = aiodev->dev.info;
> + aiodev->dev.info = imx7d_adc_devinfo;
> +
> + return 0;
> +}
> +
> +static void imx7d_adc_disable(struct device_d *dev)
> +{
> + struct imx7d_adc *info = dev->priv;
dev->priv is set to &info->aiodev above.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list