v2022.03.0
Sascha Hauer
sha at pengutronix.de
Mon Mar 14 02:16:38 PDT 2022
Hi All,
I am happy to announce barebox-2022.03.0.
No big changes, but a few nice little thingies here and there. UBIFS now
has ZSTD compression support which is supported in the Kernel for quite
a while. The 'wd' command now has an option to shortcircuit all running
watchdogs: A 'wd -x' disables all known watchdogs, either by hardware
disabling them or then that's not possibly by periodically feeding them.
We have support for a new rk3568 board, the BananaPi R2 Pro. The TQMa6UL
SoM board is now supported on the TQ eval board and in our mission to
widen the deep probe support, it is now supported on the raspberry Pi
boards.
Hve Fun!
Sascha
----------------------------------------------------------------
Ahmad Fatoum (42):
block: efi-block-io: add devinfo callback for media info
commands: wd: add new -x option to inhibit all watchdogs
Documentation: user: introduction: update with lore/matrix/libera info
commands: add missing command groups
Documentation: regulator: reference new directory from index
Documentation: boards: openrisc: fix wrong header format
Documentation: user: watchdog: note new wd -x option
reset: add simple reset controller support
reset: stm32: drop STM32 MCU support in favor of simple reset driver
include: <asm-generic/bug.h>: implement WARN_ON_ONCE
string: define new memdup_array
clk: composite: add clk_hw registration functions
clk: divider: add clk_hw registration functions
clk: fixed-factor: add clk_hw registration functions
clk: clk-fixed: add clk_hw registration functions
clk: define clk_hw_register
clk: mux: add clk_hw registration functions
clk: mux: export clk_mux_round_rate
clk: implement of_clk_add_hw_provider
clk: gate: add clk_hw registration functions
ARM: stm32mp: allow driver reuse for STM32 MCUs
clk: add clock driver for stm32f4 and stm32f7
clocksource: add ARMv7-M SysTick driver
clocksource: add STM32 Timer driver
gpiolib: implement gpiod_set_value
video: add driver for STM32 LCD-TFT Display Controller
sandbox: symlink stickypage.bin into build directory
compiler: fix __attribute__((format(printf, sandbox incompatibility
mtd: mtdram: discard superfluous code
mtd: mtdram: add physically mapped ROM (mtd-rom) support
test: self: printf: log skipped tests
test: self: printf: add tests for %*ph prints
of: report whether of_diff found differences in return code
of: silence of_diff output for negative indents
test: self: add device tree manipulation test
state: add deep probe aware helpers to get state
video: add MIPI DBI Type C Option 3 support
video: add Ilitek ILI9341 panel support
regulator: fix enabling of always-on regulators
bootm: add missing space in error message
Documentation: devel: project-ideas: align with GSoC guidelines
clk: composite: fix possible NULL pointer dereference
Antony Pavlov (1):
imd: add optional endianness= parameter for bi-endian systems
Denis Orlov (1):
MIPS: fix optimised memset returning garbage
Frank Wunderlich (2):
Kbuild: add bareboxversion target to Makefile
ARM: Rockchip: Add rk3568 BananaPi R2 Pro board support
Johannes Schneider (1):
Documentation: add chapter on Talks about barebox
Juergen Borleis (2):
Add the base Ricoh RN5T568 PMIC driver
Add Ricoh RN5T568 PMIC based watchdog
Jules Maselbas (5):
filetype: Add QOI format image type
gui: Add qoi image format
scripts: Add qoiconv to convert png to qoi
logo: Enable image format selection for the logo
logo: Add choice for the QOI image format option
Masahiro Yamada (3):
setlocalversion: update to Linux 5.16
kvx: remove unused CONFIG_ARCHINFO
kbuild: replace $(H) with $(pound)
Michael Olbrich (3):
cdev: rename partuuid to uuid
cdev: add diskuuid support
efi: probe devices from the device-tree
Oleksij Rempel (6):
ARM: rpi: convert board code to a driver
ARM: bcm2835 mbox: drop driver mode and probe on first request
ARM: rpi: move clk support to a separate driver
ARM: rpi: validate devicetree compatible instead of changing model name
ARM: rpi: set host name based on DT compatible
ARM: rpi: enable deep-probe support
Rouven Czerwinski (1):
ARM: imx: add support for TQMa6UL SoM on MBa6ulxl
Sascha Hauer (29):
ARM: rockchip-v8-defconfig: Enable USB
build: Include dts/include/ after include/
dts: update to v5.17-rc1
clk: Move clk_hw_get_num_parents out of ifdef
of_path: Fix typo
dts: update to v5.17-rc2
ubifs: Add zstd support
rename cdev_open() -> cdev_open_by_name()
cdev: implement cdev_open()
driver: Add functions to free devices
cdev: Create missing cdev_* functions
cdev: create iterator for cdev list
misc: Add storage-by-uuid driver
ARM: rockchip: rk3568-evb: Drop unused property
compressed dtb: Make sure they are only available when supported
Merge branch 'for-next/doc'
Merge branch 'for-next/dts'
Merge branch 'for-next/efi'
Merge branch 'for-next/misc'
Merge branch 'for-next/qoi'
Merge branch 'for-next/rpi'
Merge branch 'for-next/sata-mv'
Merge branch 'for-next/state'
Merge branch 'for-next/stm32'
Merge branch 'for-next/tests'
Merge branch 'for-next/ubifs'
Merge branch 'for-next/video'
scripts: bareboximd: Fix -c option
Release v2022.03.0
Steffen Trumtrar (6):
ata: sata_mv: cleanup alignment
ata: sata_mv: clear SERROR and en/disable EDMA
ata: sata_mv: handle the phy errata
ata: sata_mv: enable Generation 2 speed support
ata: sata_mv: issue hard-reset on probe
ata: sata_mv: try probing multiple times
Ulrich Ölmann (3):
power: reset: Kconfig: fix copy-&-paste bug in help text
Documentation: reboot-mode: fix typos
Documentation: reboot-mode: mention that system.reboot_mode.next is initially set to 'normal'
Uwe Kleine-König (1):
crypto: consistently name the algo digest symbols HAVE_DIGEST_...
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list