[PATCH v2] ARM: stm32: add support for PHYTEC phyCORE stm32mp1

Sascha Hauer sha at pengutronix.de
Thu Mar 3 02:05:27 PST 2022 

On Wed, Mar 02, 2022 at 05:02:42PM +0100, Ahmad Fatoum wrote:
> From: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> 
> Import DT[1] and add the boilerplate to have barebox generate a SSBL
> for the board.
> 
> [1]: git://git.phytec.de/tf-a-stm32mp
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
> v1 -> v2:
>   - drop QSPI and other nodes we don't use in barebox
>   - remove max-frequency limitation for SD-Card
> ---

Applied, thanks

Sascha

>  arch/arm/boards/Makefile                      |   1 +
>  .../boards/phytec-phycore-stm32mp1/Makefile   |   3 +
>  .../boards/phytec-phycore-stm32mp1/board.c    |  28 ++
>  .../boards/phytec-phycore-stm32mp1/lowlevel.c |  19 ++
>  arch/arm/dts/Makefile                         |   1 +
>  .../dts/stm32mp157c-phycore-stm32mp1-3.dts    |  41 +++
>  ...stm32mp157c-phycore-stm32mp15-pinctrl.dtsi |  92 ++++++
>  .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 271 ++++++++++++++++++
>  arch/arm/mach-stm32mp/Kconfig                 |   7 +
>  images/Makefile.stm32mp                       |   2 +
>  10 files changed, 465 insertions(+)
>  create mode 100644 arch/arm/boards/phytec-phycore-stm32mp1/Makefile
>  create mode 100644 arch/arm/boards/phytec-phycore-stm32mp1/board.c
>  create mode 100644 arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c
>  create mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
>  create mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
>  create mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
> 
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index 8557e1dca8c6..75e15cbda4df 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -101,6 +101,7 @@ obj-$(CONFIG_MACH_PCM049)			+= phytec-phycore-omap4460/
>  obj-$(CONFIG_MACH_PHYTEC_SOM_AM335X)		+= phytec-som-am335x/
>  obj-$(CONFIG_MACH_PHYTEC_SOM_IMX6)		+= phytec-som-imx6/
>  obj-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7)		+= phytec-phycore-imx7/
> +obj-$(CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1)	+= phytec-phycore-stm32mp1/
>  obj-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ)		+= phytec-som-imx8mq/
>  obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3)	+= plathome-openblocks-ax3/
>  obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6)	+= plathome-openblocks-a6/
> diff --git a/arch/arm/boards/phytec-phycore-stm32mp1/Makefile b/arch/arm/boards/phytec-phycore-stm32mp1/Makefile
> new file mode 100644
> index 000000000000..1d052d28c9fc
> --- /dev/null
> +++ b/arch/arm/boards/phytec-phycore-stm32mp1/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +lwl-y += lowlevel.o
> +obj-y += board.o
> diff --git a/arch/arm/boards/phytec-phycore-stm32mp1/board.c b/arch/arm/boards/phytec-phycore-stm32mp1/board.c
> new file mode 100644
> index 000000000000..eb6147785ff0
> --- /dev/null
> +++ b/arch/arm/boards/phytec-phycore-stm32mp1/board.c
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +#include <common.h>
> +#include <driver.h>
> +#include <bootsource.h>
> +
> +static int phycore_stm32mp1_probe(struct device_d *dev)
> +{
> +	if (bootsource_get_instance() == 0)
> +		of_device_enable_path("/chosen/environment-sd");
> +	else
> +		of_device_enable_path("/chosen/environment-emmc");
> +
> +	barebox_set_hostname("phyCORE-STM32MP1");
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id phycore_stm32mp1_of_match[] = {
> +	{ .compatible = "phytec,phycore-stm32mp1-3" },
> +	{ /* sentinel */ },
> +};
> +
> +static struct driver_d phycore_stm32mp1_board_driver = {
> +	.name = "board-phycore-stm32mp1",
> +	.probe = phycore_stm32mp1_probe,
> +	.of_compatible = phycore_stm32mp1_of_match,
> +};
> +device_platform_driver(phycore_stm32mp1_board_driver);
> diff --git a/arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c b/arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c
> new file mode 100644
> index 000000000000..f76bad86a10a
> --- /dev/null
> +++ b/arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <common.h>
> +#include <mach/entry.h>
> +#include <debug_ll.h>
> +
> +extern char __dtb_z_stm32mp157c_phycore_stm32mp1_3_start[];
> +
> +ENTRY_FUNCTION(start_phycore_stm32mp1_3, r0, r1, r2)
> +{
> +	void *fdt;
> +
> +	stm32mp_cpu_lowlevel_init();
> +
> +	putc_ll('>');
> +
> +	fdt = __dtb_z_stm32mp157c_phycore_stm32mp1_3_start + get_runtime_offset();
> +
> +	stm32mp1_barebox_entry(fdt);
> +}
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index e0bb66580f38..925ac12aa52a 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -75,6 +75,7 @@ lwl-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-phycard.dtb.o \
>  				imx6ull-phytec-phycore-som-nand.dtb.o \
>  				imx6ull-phytec-phycore-som-emmc.dtb.o
>  lwl-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += imx7d-phyboard-zeta.dtb.o
> +lwl-$(CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1) += stm32mp157c-phycore-stm32mp1-3.dtb.o
>  lwl-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += imx8mq-phytec-phycore-som.dtb.o
>  lwl-$(CONFIG_MACH_PINE64_QUARTZ64) += rk3566-quartz64-a.dtb.o
>  lwl-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
> diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
> new file mode 100644
> index 000000000000..0818f8d9adbe
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
> @@ -0,0 +1,41 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
> +/*
> + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
> + * Author: Dom VOVARD <dom.vovard at linrt.com>.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <arm/stm32mp157.dtsi>
> +#include <arm/stm32mp15xc.dtsi>
> +#include <arm/stm32mp15-pinctrl.dtsi>
> +#include <arm/stm32mp15xxac-pinctrl.dtsi>
> +#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
> +
> +/ {
> +	model = "PHYTEC phyCORE-STM32MP1-3 SoM";
> +	compatible = "phytec,phycore-stm32mp1-3", "st,stm32mp157";
> +
> +	chosen {
> +		environment-sd {
> +			compatible = "barebox,environment";
> +			device-path = &sdmmc1, "partname:barebox-environment";
> +			status = "disabled";
> +		};
> +
> +		environment-emmc {
> +			compatible = "barebox,environment";
> +			device-path = &sdmmc2, "partname:barebox-environment";
> +			status = "disabled";
> +		};
> +	};
> +};
> +
> +&sdmmc1 {
> +        status = "okay";
> +};
> +
> +&sdmmc2 {
> +        status = "okay";
> +};
> diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
> new file mode 100644
> index 000000000000..011d73ec3f1a
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
> @@ -0,0 +1,92 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
> +/*
> + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
> + * Author: Dom VOVARD <dom.vovard at linrt.com>.
> + */
> +#include <arm/stm32mp15-pinctrl.dtsi>
> +
> +&ethernet0_rgmii_pins_a {
> +	pins1 {
> +		pinmux = <STM32_PINMUX('G', 4, AF11)>,	/* ETH_RGMII_GTX_CLK */
> +			 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
> +			 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
> +			 <STM32_PINMUX('C', 2, AF11)>,	/* ETH_RGMII_TXD2 */
> +			 <STM32_PINMUX('E', 2, AF11)>,	/* ETH_RGMII_TXD3 */
> +			 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
> +			 <STM32_PINMUX('A', 2, AF11)>,	/* ETH_MDIO */
> +			 <STM32_PINMUX('C', 1, AF11)>;	/* ETH_MDC */
> +		bias-disable;
> +		drive-push-pull;
> +		slew-rate = <2>;
> +	};
> +	pins2 {
> +		pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
> +			 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
> +			 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
> +			 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
> +			 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
> +			 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
> +		bias-disable;
> +	};
> +};
> +
> +&pinctrl {
> +	sdmmc1_dir_pins_b: sdmmc1-dir-1 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('E', 12, AF8)>, /* SDMMC1_D0DIR */
> +				 <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
> +				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
> +			slew-rate = <3>;
> +			drive-push-pull;
> +			bias-pull-up;
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
> +			bias-pull-up;
> +		};
> +	};
> +};
> +
> +&sdmmc1_b4_pins_a {
> +	pins1 {
> +		pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
> +			 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
> +			 <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
> +			 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
> +			 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
> +		slew-rate = <1>;
> +		drive-push-pull;
> +		bias-disable;
> +	};
> +	pins2 {
> +		pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
> +		slew-rate = <2>;
> +		drive-push-pull;
> +		bias-disable;
> +	};
> +};
> +
> +&sdmmc2_d47_pins_a {
> +	pins {
> +		pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
> +			 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
> +			 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
> +			 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
> +		slew-rate = <1>;
> +		drive-push-pull;
> +		bias-pull-up;
> +	};
> +};
> +
> +&uart4_pins_a {
> +	pins1 {
> +		pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
> +		bias-disable;
> +		drive-push-pull;
> +		slew-rate = <0>;
> +	};
> +	pins2 {
> +		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> +		bias-disable;
> +	};
> +};
> diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
> new file mode 100644
> index 000000000000..a40e59ae2e53
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
> @@ -0,0 +1,271 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
> +/*
> + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
> + * Author: Dom VOVARD <dom.vovard at linrt.com>.
> + */
> +
> +#include "stm32mp157c-phycore-stm32mp15-pinctrl.dtsi"
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include "stm32mp151.dtsi"
> +
> +/ {
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	aliases {
> +		serial0 = &uart4;
> +		serial1 = &usart3;
> +	};
> +
> +	vin: vin {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vin";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +
> +	pwr_irq: pwr at 50001020 {
> +		compatible = "st,stm32mp1-pwr";
> +		reg = <0x50001020 0x100>;
> +	};
> +};
> +
> +&bsec {
> +	board_id: board_id at ec {
> +		reg = <0xec 0x4>;
> +		st,non-secure-otp;
> +	};
> +};
> +
> +&clk_hse {
> +	st,digbypass;
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&vddcore>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vddcore>;
> +};
> +
> +&ethernet0 {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
> +	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethphy>;
> +	max-speed = <1000>;
> +	st,eth-clk-sel;
> +	status = "okay";
> +
> +	mdio0 {
> +		compatible = "snps,dwmac-mdio";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy: ethernet-phy at 1 {
> +			reg = <1>;
> +		};
> +	};
> +};
> +
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c4_pins_a>;
> +	i2c-scl-rising-time-ns = <185>;
> +	i2c-scl-falling-time-ns = <20>;
> +
> +	pmic: stpmic at 33 {
> +		compatible = "st,stpmic1";
> +		reg = <0x33>;
> +
> +		regulators {
> +			compatible = "st,stpmic1-regulators";
> +			buck1-supply = <&vin>;
> +			buck2-supply = <&vin>;
> +			buck3-supply = <&vin>;
> +			buck4-supply = <&vin>;
> +			ldo1-supply = <&v3v3>;
> +			ldo2-supply = <&v3v3>;
> +			ldo3-supply = <&vdd_ddr>;
> +			ldo4-supply = <&vin>;
> +			ldo5-supply = <&v3v3>;
> +			ldo6-supply = <&v3v3>;
> +			vref_ddr-supply = <&vin>;
> +			boost-supply = <&vin>;
> +			pwr_sw1-supply = <&bst_out>;
> +			pwr_sw2-supply = <&bst_out>;
> +
> +			vddcore: buck1 {
> +				regulator-name = "vddcore";
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-always-on;
> +				regulator-initial-mode = <0>;
> +				regulator-over-current-protection;
> +			};
> +
> +			vdd_ddr: buck2 {
> +				regulator-name = "vdd_ddr";
> +				regulator-min-microvolt = <1350000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-always-on;
> +				regulator-initial-mode = <0>;
> +				regulator-over-current-protection;
> +			};
> +
> +			vdd: buck3 {
> +				regulator-name = "vdd";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +				st,mask-reset;
> +				regulator-initial-mode = <0>;
> +				regulator-over-current-protection;
> +			};
> +
> +			v3v3: buck4 {
> +				regulator-name = "v3v3";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +				regulator-over-current-protection;
> +				regulator-initial-mode = <0>;
> +			};
> +
> +			v1v8_audio: ldo1 {
> +				regulator-name = "v1v8_audio";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +			};
> +
> +			vdd_eth_2v5: ldo2 {
> +				regulator-name = "vdd_eth_2v5";
> +				regulator-min-microvolt = <2500000>;
> +				regulator-max-microvolt = <2500000>;
> +				regulator-always-on;
> +			};
> +
> +			vtt_ddr: ldo3 {
> +				regulator-name = "vtt_ddr";
> +				regulator-min-microvolt = <500000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-always-on;
> +				regulator-over-current-protection;
> +			};
> +
> +			vdd_usb: ldo4 {
> +				regulator-name = "vdd_usb";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vdda: ldo5 {
> +				regulator-name = "vdda";
> +				regulator-min-microvolt = <2900000>;
> +				regulator-max-microvolt = <2900000>;
> +				regulator-boot-on;
> +			};
> +
> +			vdd_eth_1v0: ldo6 {
> +				regulator-name = "vdd_eth_1v0";
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-always-on;
> +			};
> +
> +			vref_ddr: vref_ddr {
> +				regulator-name = "vref_ddr";
> +				regulator-always-on;
> +				regulator-over-current-protection;
> +			};
> +
> +			bst_out: boost {
> +				regulator-name = "bst_out";
> +			};
> +
> +			vbus_otg: pwr_sw1 {
> +				regulator-name = "vbus_otg";
> +			};
> +
> +			vbus_sw: pwr_sw2 {
> +				regulator-name = "vbus_sw";
> +				regulator-active-discharge = <1>;
> +			};
> +		};
> +	};
> +};
> +
> +&iwdg2 {
> +	timeout-sec = <32>;
> +	status = "okay";
> +};
> +
> +&pwr_regulators {
> +	vdd-supply = <&vdd>;
> +	vdd_3v3_usbfs-supply = <&vdd_usb>;
> +};
> +
> +&rng1 {
> +	status = "okay";
> +};
> +
> +&sdmmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc1_b4_pins_a>;
> +	disable-wp;
> +	st,neg-edge;
> +	bus-width = <4>;
> +	vmmc-supply = <&v3v3>;
> +	status = "disabled";
> +};
> +
> +&sdmmc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> +	non-removable;
> +	no-sd;
> +	no-sdio;
> +	st,neg-edge;
> +	bus-width = <8>;
> +	vmmc-supply = <&v3v3>;
> +	vqmmc-supply = <&v3v3>;
> +	mmc-ddr-3_3v;
> +	status = "disabled";
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart4_pins_a>;
> +	status = "okay";
> +};
> +
> +&usart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usart3_pins_a>;
> +	status = "disabled";
> +};
> +
> +&usbotg_hs {
> +	phys = <&usbphyc_port1 0>;
> +	phy-names = "usb2-phy";
> +	usb-role-switch;
> +	status = "okay";
> +};
> +
> +&usbphyc {
> +	status = "okay";
> +};
> +
> +&usbphyc_port0 {
> +	phy-supply = <&vdd_usb>;
> +};
> +
> +&usbphyc_port1 {
> +	phy-supply = <&vdd_usb>;
> +};
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index 57c1691591e7..bc0a48d64c82 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -48,4 +48,11 @@ config MACH_PROTONIC_STM32MP1
>  	  Builds all barebox-prtt1*.stm32 that can be deployed as SSBL
>  	  on the respective PRTT1L family board
>  
> +config MACH_PHYTEC_PHYCORE_STM32MP1
> +	select ARCH_STM32MP157
> +	bool "phyCORE-STM32MP1"
> +	help
> +	  builds an additional barebox-phytec-phycore.stm32
> +	  that can be deployed as SSBL on the phyCORE-STM32MP1
> +
>  endif
> diff --git a/images/Makefile.stm32mp b/images/Makefile.stm32mp
> index abe70a6a5037..59d65722078d 100644
> --- a/images/Makefile.stm32mp
> +++ b/images/Makefile.stm32mp
> @@ -41,3 +41,5 @@ $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1s, prtt1s)
>  $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1c, prtt1c)
>  
>  $(call build_stm32mp_image, CONFIG_MACH_SEEED_ODYSSEY, start_stm32mp157c_seeed_odyssey, stm32mp157c-seeed-odyssey)
> +
> +$(call build_stm32mp_image, CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1, start_phycore_stm32mp1_3, phycore-stm32mp1)
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

More information about the barebox mailing list