[PATCH] mci: imx-esdhc-common: Don't clear unhandled status bits

[Robin van der Gracht]

A DMA cmd + data transfer can finish or stop (i.e. on a block gap) before
the status register is cleared. In that case we'll lose track of state
causing sdhci_transfer_data_dma() to loop forever waiting for status bits
that are already cleared.

Clearing SDHCI_INT_CMD_COMPLETE should suffice here. Since it's not
evaluated a second time, clearing it at the start of the function is
sufficient so we can just remove the erroneous status write.

Signed-off-by: Robin van der Gracht <robin at protonic.nl>
---
 drivers/mci/imx-esdhc-common.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mci/imx-esdhc-common.c b/drivers/mci/imx-esdhc-common.c
index a12db43c88..27293e44b7 100644
--- a/drivers/mci/imx-esdhc-common.c
+++ b/drivers/mci/imx-esdhc-common.c
@@ -176,7 +176,6 @@ int __esdhc_send_cmd(struct fsl_esdhc_host *host, struct mci_cmd *cmd,
 	}
 
 	irqstat = sdhci_read32(&host->sdhci, SDHCI_INT_STATUS);
-	sdhci_write32(&host->sdhci, SDHCI_INT_STATUS, irqstat);
 
 	if (irqstat & CMD_ERR)
 		return -EIO;
-- 
2.34.1