[PATCH 1/9] ARM: boards: protonic-imx6: prtvt7 hardkey inputs are active low
Oleksij Rempel
o.rempel at pengutronix.de
Mon Jun 20 00:23:39 PDT 2022
On Mon, Jun 20, 2022 at 08:48:32AM +0200, Robin van der Gracht wrote:
> On 2022-06-16 18:38, Oleksij Rempel wrote:
> > Am 16.06.22 um 18:28 schrieb Oleksij Rempel:
> > > Hi Robin,
> > >
> > > On Thu, Jun 16, 2022 at 03:11:06PM +0200, Robin van der Gracht wrote:
> > > > The usb check needs to be skipped unless both keys are pressed
> > > > simultaneously.
> > > >
> > > > Signed-off-by: Robin van der Gracht <robin at protonic.nl>
> > > > ---
> > > > arch/arm/boards/protonic-imx6/board.c | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/arch/arm/boards/protonic-imx6/board.c
> > > > b/arch/arm/boards/protonic-imx6/board.c
> > > > index cdbb8debe6..8f8a0c745e 100644
> > > > --- a/arch/arm/boards/protonic-imx6/board.c
> > > > +++ b/arch/arm/boards/protonic-imx6/board.c
> > > > @@ -645,7 +645,7 @@ static int prt_imx6_init_prtvt7(struct
> > > > prt_imx6_priv *priv)
> > > > gpio_direction_input(GPIO_KEY_F6);
> > > > gpio_direction_input(GPIO_KEY_CYCLE);
> > > >
> > > > - if (gpio_get_value(GPIO_KEY_CYCLE) && gpio_get_value(GPIO_KEY_F6))
> > > > + if (gpio_get_value(GPIO_KEY_CYCLE) || gpio_get_value(GPIO_KEY_F6))
> > > > priv->no_usb_check = 1;
> > >
> > > Hm, you probably wont:
> > > if (!(gpio_get_value(GPIO_KEY_CYCLE) && gpio_get_value(GPIO_KEY_F6)))
> > >
> > > otherwise usb check will be always skipped.
> >
> > Or, it is active low and your patch is correct :D
>
> They are active low. I mentoned that in the patch subject ;)
> I want both keys pressed simultaniously as a requirement for the usb check
> because it adds a delay (autoboot_timeout) to the boot process.
Now you can see how important it is to have all needed info in the code,
not in the patch subject :)
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list