[PATCH 2/2] ARM: mnt-reform: switch to upstream DT

[Lucas Stach]

Now that all the necessary bits are upstream, we drop most of
the Barebox DT for this board.

Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
 arch/arm/dts/imx8mq-mnt-reform2.dts | 164 +---------------------------
 1 file changed, 1 insertion(+), 163 deletions(-)

diff --git a/arch/arm/dts/imx8mq-mnt-reform2.dts b/arch/arm/dts/imx8mq-mnt-reform2.dts
index 5a65324b3c75..deb31abe5414 100644
--- a/arch/arm/dts/imx8mq-mnt-reform2.dts
+++ b/arch/arm/dts/imx8mq-mnt-reform2.dts
@@ -6,17 +6,12 @@
 
 /dts-v1/;
 
-#include <arm64/freescale/imx8mq.dtsi>
+#include <arm64/freescale/imx8mq-mnt-reform2.dts>
 #include "imx8mq.dtsi"
 #include "imx8mq-ddrc.dtsi"
 
 / {
-	model = "MNT Reform2";
-	compatible = "mntre,reform2", "fsl,imx8mq";
-
 	chosen {
-		stdout-path = &uart1;
-
 		environment-emmc {
 			compatible = "barebox,environment";
 			device-path = &usdhc1, "partname:barebox-environment";
@@ -29,86 +24,13 @@
 			status = "disabled";
 		};
 	};
-
-	pcie1_refclk: pcie1-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy at 4 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <4>;
-			interrupts = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &ocotp {
 	barebox,provide-mac-address = <&fec1 0x640>;
 };
 
-&pcie1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie1>;
-	reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
-		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
-		 <&pcie1_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usb3_phy0 {
-	status = "okay";
-};
-
-&usb3_phy1 {
-	status = "okay";
-};
-
-&usb_dwc3_0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
 &usdhc1 {
-	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
-	assigned-clock-rates = <400000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <8>;
-	no-mmc-hs400;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -124,14 +46,6 @@
 };
 
 &usdhc2 {
-	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
-	assigned-clock-rates = <200000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -145,79 +59,3 @@
 		reg = <0xe0000 0x20000>;
 	};
 };
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_fec1: fec1grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
-			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
-			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
-			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
-			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
-			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
-			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
-			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0xd1
-			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
-			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0xd1
-			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x1
-			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x1
-		>;
-	};
-
-	pinctrl_pcie1: pcie1grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x16
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x45
-			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x45
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
-			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
-			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
-			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
-			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
-			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
-			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
-			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
-			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
-			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
-			MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x41
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x03
-			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
-			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
-			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
-			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
-			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc
-		>;
-	};
-
-	pinctrl_wdog: wdog1grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
-		>;
-	};
-};
-- 
2.36.1