[PATCH] arm: rockchip: switch to mainline dts for rk3568-evb1
Michael Riesch
michael.riesch at wolfvision.net
Wed Jun 8 13:17:47 PDT 2022
The RK3568 EVB1 device tree in mainline Linux has matured since
the initial RK3568 support entered barebox. Therefore, we can now
switch to the mainline device tree.
Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>
---
arch/arm/boards/rockchip-rk3568-evb/board.c | 5 +-
arch/arm/dts/rk3568-evb1-v10.dts | 519 +-------------------
2 files changed, 5 insertions(+), 519 deletions(-)
diff --git a/arch/arm/boards/rockchip-rk3568-evb/board.c b/arch/arm/boards/rockchip-rk3568-evb/board.c
index 09385bea29..a466d385a2 100644
--- a/arch/arm/boards/rockchip-rk3568-evb/board.c
+++ b/arch/arm/boards/rockchip-rk3568-evb/board.c
@@ -28,8 +28,9 @@ static int rk3568_evb_probe(struct device_d *dev)
else
of_device_enable_path("/chosen/environment-emmc");
- rk3568_bbu_mmc_register("emmc", BBU_HANDLER_FLAG_DEFAULT, "/dev/emmc");
- rk3568_bbu_mmc_register("sd", 0, "/dev/sd");
+ rk3568_bbu_mmc_register("sd", 0, "/dev/mmc0");
+ rk3568_bbu_mmc_register("emmc", BBU_HANDLER_FLAG_DEFAULT,
+ "/dev/mmc1");
return 0;
}
diff --git a/arch/arm/dts/rk3568-evb1-v10.dts b/arch/arm/dts/rk3568-evb1-v10.dts
index df5633978d..d2c1fc89a8 100644
--- a/arch/arm/dts/rk3568-evb1-v10.dts
+++ b/arch/arm/dts/rk3568-evb1-v10.dts
@@ -5,22 +5,11 @@
*/
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3568.dtsi"
-/ {
- model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
- compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568";
-
- aliases {
- emmc = &sdhci;
- sd = &sdmmc0;
- };
+#include <arm64/rockchip/rk3568-evb1-v10.dts>
+/ {
chosen: chosen {
- stdout-path = "serial2:1500000n8";
-
environment-sd {
compatible = "barebox,environment";
device-path = &environment_sd;
@@ -38,437 +27,10 @@
device_type = "memory";
reg = <0x0 0x00a00000 0x0 0x7f600000>;
};
-
- dc_12v: dc-12v {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
- vcc3v3_lcd0_n: vcc3v3-lcd0-n {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_lcd0_n";
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_lcd1_n: vcc3v3-lcd1-n {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_lcd1_n";
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc5v0_otg: vcc5v0-otg-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_otg_en>;
- regulator-name = "vcc5v0_otg";
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- };
-};
-
-&gmac0 {
- phy-mode = "rgmii";
- clock_in_out = "output";
-
- assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
- assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
- assigned-clock-rates = <0>, <125000000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&gmac0_miim
- &gmac0_tx_bus2
- &gmac0_rx_bus2
- &gmac0_rgmii_clk
- &gmac0_rgmii_bus>;
-
- tx_delay = <0x3c>;
- rx_delay = <0x2f>;
-
- phy-handle = <&rgmii_phy0>;
- status = "okay";
-};
-
-&gmac1 {
- phy-mode = "rgmii";
- clock_in_out = "output";
-
- assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
- assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
- assigned-clock-rates = <0>, <125000000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&gmac1m1_miim
- &gmac1m1_tx_bus2
- &gmac1m1_rx_bus2
- &gmac1m1_rgmii_clk
- &gmac1m1_rgmii_bus>;
-
- tx_delay = <0x4f>;
- rx_delay = <0x26>;
-
- phy-handle = <&rgmii_phy1>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- rk809: pmic at 20 {
- compatible = "rockchip,rk809";
- reg = <0x20>;
- interrupt-parent = <&gpio0>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-names = "default", "pmic-sleep",
- "pmic-power-off", "pmic-reset";
- pinctrl-0 = <&pmic_int>;
- pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
- pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
- pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
-
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "rk808-clkout1", "rk808-clkout2";
- //fb-inner-reg-idxs = <2>;
- /* 1: rst regs (default in codes), 0: rst the pmic */
- pmic-reset-func = <0>;
-
- vcc1-supply = <&vcc3v3_sys>;
- vcc2-supply = <&vcc3v3_sys>;
- vcc3-supply = <&vcc3v3_sys>;
- vcc4-supply = <&vcc3v3_sys>;
- vcc5-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc3v3_sys>;
-
- pwrkey {
- status = "okay";
- };
-
- pinctrl_rk8xx: pinctrl_rk8xx {
- gpio-controller;
- #gpio-cells = <2>;
-
- rk817_slppin_null: rk817_slppin_null {
- pins = "gpio_slp";
- function = "pin_fun0";
- };
-
- rk817_slppin_slp: rk817_slppin_slp {
- pins = "gpio_slp";
- function = "pin_fun1";
- };
-
- rk817_slppin_pwrdn: rk817_slppin_pwrdn {
- pins = "gpio_slp";
- function = "pin_fun2";
- };
-
- rk817_slppin_rst: rk817_slppin_rst {
- pins = "gpio_slp";
- function = "pin_fun3";
- };
- };
-
- regulators {
- vdd_logic: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
- regulator-ramp-delay = <6001>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vdd_logic";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
- regulator-ramp-delay = <6001>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vdd_gpu";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-initial-mode = <0x2>;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vdd_npu: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
- regulator-ramp-delay = <6001>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vdd_npu";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdda0v9_image: LDO_REG1 {
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-name = "vdda0v9_image";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdda_0v9: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-name = "vdda_0v9";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdda0v9_pmu: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-name = "vdda0v9_pmu";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vccio_acodec: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_acodec";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_pmu: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3_pmu";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcca_1v8: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcca_1v8";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca1v8_pmu: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcca1v8_pmu";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca1v8_image: LDO_REG9 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcca1v8_image";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v3: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_3v3";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_sd: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc3v3_sd";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-};
-
-&mdio0 {
- rgmii_phy0: phy at 0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
- reset-assert-us = <20000>;
- reset-deassert-us = <100000>;
- reg = <0x0>;
- };
-};
-
-&mdio1 {
- rgmii_phy1: phy at 0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
- reset-assert-us = <20000>;
- reset-deassert-us = <100000>;
- reg = <0x0>;
- };
-};
-
-&pinctrl {
- pmic {
- pmic_int: pmic_int {
- rockchip,pins =
- <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- soc_slppin_gpio: soc_slppin_gpio {
- rockchip,pins =
- <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>;
- };
-
- soc_slppin_slp: soc_slppin_slp {
- rockchip,pins =
- <0 RK_PA2 1 &pcfg_pull_none>;
- };
-
- soc_slppin_rst: soc_slppin_rst {
- rockchip,pins =
- <0 RK_PA2 2 &pcfg_pull_none>;
- };
- };
-
- usb {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- vcc5v0_otg_en: vcc5v0-otg-en {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&saradc {
- vref-supply = <&vcca_1v8>;
- status = "okay";
};
&sdhci {
- bus-width = <8>;
- max-frequency = <200000000>;
- non-removable;
no-sd;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
partitions {
compatible = "fixed-partitions";
@@ -483,18 +45,6 @@
};
&sdmmc0 {
- max-frequency = <150000000>;
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- disable-wp;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc3v3_sd>;
- vqmmc-supply = <&vccio_sd>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
- status = "okay";
-
partitions {
compatible = "fixed-partitions";
#address-cells = <2>;
@@ -506,68 +56,3 @@
};
};
};
-
-&uart2 {
- status = "okay";
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy0_otg {
- vbus-supply = <&vcc5v0_otg>;
- status = "okay";
-};
-
-&u2phy1_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy1_otg {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&usb2phy0 {
- status = "okay";
-};
-
-&usb2phy1 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host0_xhci {
- extcon = <&usb2phy0>;
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usb_host1_xhci {
- status = "okay";
-};
-
-&combphy0_us {
- status = "okay";
-};
-
-&combphy1_usq {
- status = "okay";
-};
--
2.30.2
More information about the barebox
mailing list