[PATCH 2/7] net: e1000: properly read/write MDI registers on 8254x cards
Denis Orlov
denorl2009 at gmail.com
Wed Jul 20 06:30:55 PDT 2022
Taken from Linux e1000 driver.
Signed-off-by: Denis Orlov <denorl2009 at gmail.com>
---
drivers/net/e1000/e1000.h | 3 +++
drivers/net/e1000/main.c | 22 ++++++++++++++++++++++
2 files changed, 25 insertions(+)
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 52ad3d4cdb..3a5ee9988e 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -1388,6 +1388,9 @@ struct e1000_eeprom_info {
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
+
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
diff --git a/drivers/net/e1000/main.c b/drivers/net/e1000/main.c
index bfb8d8ff2f..3b45fb3b51 100644
--- a/drivers/net/e1000/main.c
+++ b/drivers/net/e1000/main.c
@@ -54,6 +54,8 @@ static int e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t *speed,
uint16_t *duplex);
static int e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
uint16_t *phy_data);
+static int e1000_phy_write(struct mii_bus *bus, int phy_addr, int reg_addr,
+ u16 phy_data);
static int e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
uint16_t phy_data);
static int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
@@ -2627,6 +2629,15 @@ static int e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
{
int ret;
+ if ((hw->phy_type == e1000_phy_igp) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret = e1000_phy_write(&hw->miibus, 1, IGP01E1000_PHY_PAGE_SELECT,
+ (u16)reg_addr);
+ if (ret)
+ return ret;
+
+ reg_addr &= MAX_PHY_REG_ADDRESS;
+ }
+
ret = e1000_phy_read(&hw->miibus, 1, reg_addr);
if (ret < 0)
return ret;
@@ -2702,6 +2713,17 @@ static int e1000_phy_write(struct mii_bus *bus, int phy_addr,
******************************************************************************/
static int e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t phy_data)
{
+ int ret;
+
+ if ((hw->phy_type == e1000_phy_igp) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret = e1000_phy_write(&hw->miibus, 1, IGP01E1000_PHY_PAGE_SELECT,
+ (u16)reg_addr);
+ if (ret)
+ return ret;
+
+ reg_addr &= MAX_PHY_REG_ADDRESS;
+ }
+
return e1000_phy_write(&hw->miibus, 1, reg_addr, phy_data);
}
--
2.20.1
More information about the barebox
mailing list