[PATCH] arch: arm: mach-imx: document field return in CSF template
Sascha Hauer
sha at pengutronix.de
Mon Feb 28 01:30:26 PST 2022
On Fri, Feb 25, 2022 at 11:03:44AM +0100, Bastian Krause wrote:
> Activating the field return configuration returns a locked-down board
> (nearly) to its open state. In order to burn the FIELD_RETURN fuse, the
> CSF must contain a specific unlock command with the device's UID.
>
> Signed-off-by: Bastian Krause <bst at pengutronix.de>
> ---
> .../include/mach/habv4-imx6-gencsf-template.h | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/mach-imx/include/mach/habv4-imx6-gencsf-template.h b/arch/arm/mach-imx/include/mach/habv4-imx6-gencsf-template.h
> index a60b485292..45da2981cb 100644
> --- a/arch/arm/mach-imx/include/mach/habv4-imx6-gencsf-template.h
> +++ b/arch/arm/mach-imx/include/mach/habv4-imx6-gencsf-template.h
> @@ -39,6 +39,18 @@ hab Engine = SETUP_HABV4_ENGINE
> hab Features = SETUP_HABV4_FEATURES
> #endif
>
> +/*
> +// allow fusing FIELD_RETURN
> +// # ocotp0.permanent_write_enable=1
> +// # mw -l -d /dev/imx-ocotp 0xb8 0x1
> +hab [Unlock]
> +hab Engine = OCOTP
> +hab Features = FIELD RETURN
> +// device-specific UID:
> +// $ dd if=/sys/bus/nvmem/devices/imx-ocotp0/nvmem bs=4 skip=1 count=2 status=none | hexdump -ve '1/1 "0x%.2x, "' | sed 's/, $//'
> +hab UID = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08
> +*/
> +
> hab [Install Key]
> /* verification key index in key store (0, 2...4) */
> hab Verification index = 0
> --
> 2.30.2
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list