[PATCH] ARM: stm32: add support for PHYTEC phyCORE stm32mp1
Ahmad Fatoum
a.fatoum at pengutronix.de
Wed Feb 23 03:10:36 PST 2022
From: Steffen Trumtrar <s.trumtrar at pengutronix.de>
Import DT[1] and add the boilerplate to have barebox generate a SSBL
for the board.
[1]: git://git.phytec.de/tf-a-stm32mp
Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
arch/arm/boards/Makefile | 1 +
.../boards/phytec-phycore-stm32mp1/Makefile | 3 +
.../boards/phytec-phycore-stm32mp1/board.c | 28 ++
.../boards/phytec-phycore-stm32mp1/lowlevel.c | 19 +
arch/arm/dts/Makefile | 1 +
.../dts/stm32mp157c-phycore-stm32mp1-3.dts | 58 +++
...stm32mp157c-phycore-stm32mp15-pinctrl.dtsi | 92 +++++
.../stm32mp157c-phycore-stm32mp15-som.dtsi | 337 ++++++++++++++++++
arch/arm/mach-stm32mp/Kconfig | 7 +
images/Makefile.stm32mp | 2 +
10 files changed, 548 insertions(+)
create mode 100644 arch/arm/boards/phytec-phycore-stm32mp1/Makefile
create mode 100644 arch/arm/boards/phytec-phycore-stm32mp1/board.c
create mode 100644 arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c
create mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
create mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
create mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 8557e1dca8c6..75e15cbda4df 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_MACH_PCM049) += phytec-phycore-omap4460/
obj-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += phytec-som-am335x/
obj-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += phytec-som-imx6/
obj-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += phytec-phycore-imx7/
+obj-$(CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1) += phytec-phycore-stm32mp1/
obj-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += phytec-som-imx8mq/
obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += plathome-openblocks-ax3/
obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += plathome-openblocks-a6/
diff --git a/arch/arm/boards/phytec-phycore-stm32mp1/Makefile b/arch/arm/boards/phytec-phycore-stm32mp1/Makefile
new file mode 100644
index 000000000000..1d052d28c9fc
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-stm32mp1/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+lwl-y += lowlevel.o
+obj-y += board.o
diff --git a/arch/arm/boards/phytec-phycore-stm32mp1/board.c b/arch/arm/boards/phytec-phycore-stm32mp1/board.c
new file mode 100644
index 000000000000..eb6147785ff0
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-stm32mp1/board.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include <common.h>
+#include <driver.h>
+#include <bootsource.h>
+
+static int phycore_stm32mp1_probe(struct device_d *dev)
+{
+ if (bootsource_get_instance() == 0)
+ of_device_enable_path("/chosen/environment-sd");
+ else
+ of_device_enable_path("/chosen/environment-emmc");
+
+ barebox_set_hostname("phyCORE-STM32MP1");
+
+ return 0;
+}
+
+static const struct of_device_id phycore_stm32mp1_of_match[] = {
+ { .compatible = "phytec,phycore-stm32mp1-3" },
+ { /* sentinel */ },
+};
+
+static struct driver_d phycore_stm32mp1_board_driver = {
+ .name = "board-phycore-stm32mp1",
+ .probe = phycore_stm32mp1_probe,
+ .of_compatible = phycore_stm32mp1_of_match,
+};
+device_platform_driver(phycore_stm32mp1_board_driver);
diff --git a/arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c b/arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c
new file mode 100644
index 000000000000..f76bad86a10a
--- /dev/null
+++ b/arch/arm/boards/phytec-phycore-stm32mp1/lowlevel.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <common.h>
+#include <mach/entry.h>
+#include <debug_ll.h>
+
+extern char __dtb_z_stm32mp157c_phycore_stm32mp1_3_start[];
+
+ENTRY_FUNCTION(start_phycore_stm32mp1_3, r0, r1, r2)
+{
+ void *fdt;
+
+ stm32mp_cpu_lowlevel_init();
+
+ putc_ll('>');
+
+ fdt = __dtb_z_stm32mp157c_phycore_stm32mp1_3_start + get_runtime_offset();
+
+ stm32mp1_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e0bb66580f38..925ac12aa52a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -75,6 +75,7 @@ lwl-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-phycard.dtb.o \
imx6ull-phytec-phycore-som-nand.dtb.o \
imx6ull-phytec-phycore-som-emmc.dtb.o
lwl-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += imx7d-phyboard-zeta.dtb.o
+lwl-$(CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1) += stm32mp157c-phycore-stm32mp1-3.dtb.o
lwl-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += imx8mq-phytec-phycore-som.dtb.o
lwl-$(CONFIG_MACH_PINE64_QUARTZ64) += rk3566-quartz64-a.dtb.o
lwl-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
new file mode 100644
index 000000000000..351067c9f110
--- /dev/null
+++ b/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard at linrt.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <arm/stm32mp157.dtsi>
+#include <arm/stm32mp15xc.dtsi>
+#include <arm/stm32mp15-pinctrl.dtsi>
+#include <arm/stm32mp15xxac-pinctrl.dtsi>
+#include "stm32mp151.dtsi"
+#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
+
+/ {
+ model = "PHYTEC phyCORE-STM32MP1-3 SOM";
+ compatible = "phytec,phycore-stm32mp1-3", "st,stm32mp157";
+
+ chosen {
+ environment-sd {
+ compatible = "barebox,environment";
+ device-path = &sdmmc1, "partname:barebox-environment";
+ status = "disabled";
+ };
+
+ environment-emmc {
+ compatible = "barebox,environment";
+ device-path = &sdmmc2, "partname:barebox-environment";
+ status = "disabled";
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&fmc {
+ status = "disabled";
+};
+
+&qspi {
+ status = "okay";
+};
+
+&sdmmc1 {
+ status = "okay";
+};
+
+&sdmmc2 {
+ status = "okay";
+};
+
+&cryp1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
new file mode 100644
index 000000000000..011d73ec3f1a
--- /dev/null
+++ b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard at linrt.com>.
+ */
+#include <arm/stm32mp15-pinctrl.dtsi>
+
+ðernet0_rgmii_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+};
+
+&pinctrl {
+ sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 12, AF8)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+};
+
+&sdmmc1_b4_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+};
+
+&sdmmc2_d47_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+};
+
+&uart4_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+};
diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
new file mode 100644
index 000000000000..bbcff8cde905
--- /dev/null
+++ b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard at linrt.com>.
+ */
+
+#include "stm32mp157c-phycore-stm32mp15-pinctrl.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart3;
+ };
+
+ vin: vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ pwr_irq: pwr at 50001020 {
+ compatible = "st,stm32mp1-pwr";
+ reg = <0x50001020 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ sram: sram at 10000000 {
+ compatible = "mmio-sram";
+ reg = <0x10000000 0x60000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10000000 0x60000>;
+ };
+};
+
+&bsec {
+ board_id: board_id at ec {
+ reg = <0xec 0x4>;
+ st,non-secure-otp;
+ };
+};
+
+&clk_hse {
+ st,digbypass;
+};
+
+&cpu0{
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1{
+ cpu-supply = <&vddcore>;
+};
+
+&dma1 {
+ sram = <&dma_pool>;
+};
+
+&dma2 {
+ sram = <&dma_pool>;
+};
+
+ðernet0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <ðernet0_rgmii_pins_a>;
+ pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy>;
+ max-speed = <1000>;
+ st,eth-clk-sel;
+ status = "okay";
+
+ mdio0 {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy at 1 {
+ reg = <1>;
+ };
+ };
+};
+
+&hash1 {
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic at 33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ buck1-supply = <&vin>;
+ buck2-supply = <&vin>;
+ buck3-supply = <&vin>;
+ buck4-supply = <&vin>;
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo4-supply = <&vin>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ vref_ddr-supply = <&vin>;
+ boost-supply = <&vin>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd_eth_2v5: ldo2 {
+ regulator-name = "vdd_eth_2v5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ vdd_eth_1v0: ldo6 {
+ regulator-name = "vdd_eth_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ flash0: n25q128 at 0 {
+ compatible = "micron,n25q128a13", "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ max-frequency = <10000000>;
+ vmmc-supply = <&v3v3>;
+ status = "disabled";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&v3v3>;
+ mmc-ddr-3_3v;
+ status = "disabled";
+};
+
+&sram {
+ dma_pool: dma_pool at 0 {
+ reg = <0x50000 0x10000>;
+ pool;
+ };
+};
+
+&timers12 {
+ st,hsi-cal-input = <1>;
+ st,csi-cal-input = <2>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&usart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart3_pins_a>;
+ status = "disabled";
+};
+
+&usbotg_hs {
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ usb-role-switch;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 57c1691591e7..bc0a48d64c82 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -48,4 +48,11 @@ config MACH_PROTONIC_STM32MP1
Builds all barebox-prtt1*.stm32 that can be deployed as SSBL
on the respective PRTT1L family board
+config MACH_PHYTEC_PHYCORE_STM32MP1
+ select ARCH_STM32MP157
+ bool "phyCORE-STM32MP1"
+ help
+ builds an additional barebox-phytec-phycore.stm32
+ that can be deployed as SSBL on the phyCORE-STM32MP1
+
endif
diff --git a/images/Makefile.stm32mp b/images/Makefile.stm32mp
index abe70a6a5037..59d65722078d 100644
--- a/images/Makefile.stm32mp
+++ b/images/Makefile.stm32mp
@@ -41,3 +41,5 @@ $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1s, prtt1s)
$(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1c, prtt1c)
$(call build_stm32mp_image, CONFIG_MACH_SEEED_ODYSSEY, start_stm32mp157c_seeed_odyssey, stm32mp157c-seeed-odyssey)
+
+$(call build_stm32mp_image, CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1, start_phycore_stm32mp1_3, phycore-stm32mp1)
--
2.30.2
More information about the barebox
mailing list