[PATCH v2] ARM: dts: fix wrong display-timings native-mode binding

[Ahmad Fatoum]

The value of the native-mode property is supposed to be a phandle to
the entry in question, but instead the full node path was used because
the <angle brackets> were missing. Fix this. This should not involve any
functional change as the default mode would've been the first element,
which is the same element the malformed native-mode was meant to point
at anyway.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 arch/arm/dts/imx6q-var-custom.dts   | 2 +-
 arch/arm/dts/imx6qdl-skov-imx6.dtsi | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/imx6q-var-custom.dts b/arch/arm/dts/imx6q-var-custom.dts
index ddb220fb0ad4..cbfe4da7e1b4 100644
--- a/arch/arm/dts/imx6q-var-custom.dts
+++ b/arch/arm/dts/imx6q-var-custom.dts
@@ -83,7 +83,7 @@
 		fsl,data-width = <24>;
 		status = "okay";
 		display-timings {
-			native-mode = &claawvga;
+			native-mode = <&claawvga>;
 			claawvga: claawvga {
 				native-mode;
 				clock-frequency = <35714000>;
diff --git a/arch/arm/dts/imx6qdl-skov-imx6.dtsi b/arch/arm/dts/imx6qdl-skov-imx6.dtsi
index f4610ee1e7ba..cb4224f1b441 100644
--- a/arch/arm/dts/imx6qdl-skov-imx6.dtsi
+++ b/arch/arm/dts/imx6qdl-skov-imx6.dtsi
@@ -146,7 +146,7 @@
 		};
 
 		display-timings {
-			native-mode = &l2rt;
+			native-mode = <&l2rt>;
 
 			l2rt: l2rt {
 				native-mode;
@@ -190,7 +190,7 @@
 		/* power-supply = <&reg_3p3v>; */
 
 		display-timings {
-			native-mode = &mi1010ait_1cp1;
+			native-mode = <&mi1010ait_1cp1>;
 
 			mi1010ait_1cp1: mi1010ait-1cp1 {
 				native-mode;
-- 
2.30.2