[PATCH] arm: rockchip: switch to mainline dts for bpi-r2-pro
Sascha Hauer
sha at pengutronix.de
Tue Aug 9 04:57:33 PDT 2022
Hi Frank,
On Sun, Jul 24, 2022 at 02:21:19PM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w at public-files.de>
>
> Use mainline DTS for Bananapi R2 Pro like the other rk356x devices.
>
> Xhci0 has to be set to host again, as board has no id-pin to switch between
> otg and hostmode.
>
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> ---
> .../boards/rockchip-rk3568-bpi-r2pro/board.c | 5 +-
> arch/arm/dts/rk3568-bpi-r2-pro.dts | 562 +-----------------
> 2 files changed, 4 insertions(+), 563 deletions(-)
This patch doesn't apply on master or next, could you rebase it?
Sascha
>
> diff --git a/arch/arm/boards/rockchip-rk3568-bpi-r2pro/board.c b/arch/arm/boards/rockchip-rk3568-bpi-r2pro/board.c
> index ce633266f52c..9853bf275f9f 100644
> --- a/arch/arm/boards/rockchip-rk3568-bpi-r2pro/board.c
> +++ b/arch/arm/boards/rockchip-rk3568-bpi-r2pro/board.c
> @@ -36,8 +36,9 @@ static int rk3568_bpi_r2pro_probe(struct device_d *dev)
>
> defaultenv_append_directory(defaultenv);
>
> - rk3568_bbu_mmc_register("emmc", BBU_HANDLER_FLAG_DEFAULT, "/dev/emmc");
> - rk3568_bbu_mmc_register("sd", 0, "/dev/sd");
> + rk3568_bbu_mmc_register("sd", 0, "/dev/mmc0");
> + rk3568_bbu_mmc_register("emmc", BBU_HANDLER_FLAG_DEFAULT,
> + "/dev/mmc1");
>
> return 0;
> }
> diff --git a/arch/arm/dts/rk3568-bpi-r2-pro.dts b/arch/arm/dts/rk3568-bpi-r2-pro.dts
> index c5cc300359c2..58a2bc442fdf 100644
> --- a/arch/arm/dts/rk3568-bpi-r2-pro.dts
> +++ b/arch/arm/dts/rk3568-bpi-r2-pro.dts
> @@ -5,23 +5,9 @@
> */
>
> /dts-v1/;
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include "rk3568.dtsi"
> -
> +#include "arm64/rockchip/rk3568-bpi-r2-pro.dts"
> / {
> - model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
> - compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
> -
> - aliases {
> - emmc = &sdhci;
> - sd = &sdmmc0;
> - };
> -
> chosen {
> - stdout-path = "serial2:1500000n8";
> -
> environment-sd {
> compatible = "barebox,environment";
> device-path = &environment_sd;
> @@ -39,462 +25,10 @@
> device_type = "memory";
> reg = <0x0 0x00a00000 0x0 0x7f600000>;
> };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&blue_led_pin &green_led_pin>;
> -
> - blue_led: led-0 {
> - color = <LED_COLOR_ID_BLUE>;
> - default-state = "off";
> - function = LED_FUNCTION_STATUS;
> - gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
> - };
> -
> - green_led: led-1 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "on";
> - function = LED_FUNCTION_POWER;
> - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> - };
> - };
> -
> - dc_12v: dc-12v {
> - compatible = "regulator-fixed";
> - regulator-name = "dc_12v";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc3v3_lcd0_n: vcc3v3-lcd0-n {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_lcd0_n";
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_lcd1_n: vcc3v3-lcd1-n {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_lcd1_n";
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc5v0_usb: vcc5v0_usb {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_usb_host: vcc5v0-usb-host {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_host_en>;
> - regulator-name = "vcc5v0_usb_host";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - vcc5v0_usb_otg: vcc5v0-usb-otg {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_otg_en>;
> - regulator-name = "vcc5v0_usb_otg";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -};
> -
> -&gmac1 {
> - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
> - clock_in_out = "output";
> - phy-handle = <&rgmii_phy1>;
> - phy-mode = "rgmii";
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac1m1_miim
> - &gmac1m1_tx_bus2
> - &gmac1m1_rx_bus2
> - &gmac1m1_rgmii_clk
> - &gmac1m1_rgmii_bus>;
> -
> - snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 20ms, 100ms for rtl8211f */
> - snps,reset-delays-us = <0 20000 100000>;
> - tx_delay = <0x3c>;
> - rx_delay = <0x2f>;
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - #clock-cells = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int>;
> -
> - clock-output-names = "rk808-clkout1", "rk808-clkout2";
> - /* 1: rst regs (default in codes), 0: rst the pmic */
> - pmic-reset-func = <0>;
> -
> - rockchip,system-power-controller;
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> - wakeup-source;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-init-microvolt = <900000>;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-init-microvolt = <900000>;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-name = "vdd_npu";
> - regulator-init-microvolt = <900000>;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-name = "vdda0v9_image";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-name = "vcca1v8_image";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-name = "vcc_3v3";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> - regulator-always-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> - };
> -};
> -
> -&i2c5 {
> - /* pin 3 (SDA) + 4 (SCL) of header con2 */
> - status = "disabled";
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_3v3>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_1v8>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&mdio1 {
> - rgmii_phy1: ethernet-phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x0>;
> - };
> -};
> -
> -&pinctrl {
> - leds {
> - blue_led_pin: blue-led-pin {
> - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - green_led_pin: green-led-pin {
> - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int: pmic_int {
> - rockchip,pins =
> - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> -
> - };
> -
> - usb {
> - vcc5v0_usb_host_en: vcc5v0_usb_host_en {
> - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pwm8 {
> - /* fan 5v - gnd - pwm */
> - status = "okay";
> -};
> -
> -&pwm10 {
> - /* pin 7 of header con2 */
> - status = "disabled";
> -};
> -
> -&pwm11 {
> - /* pin 15 of header con2 */
> - status = "disabled";
> -};
> -
> -&pwm12 {
> - /* pin 21 of header con2 */
> - /* shared with uart9 + spi3 */
> - pinctrl-0 = <&pwm12m1_pins>;
> - status = "disabled";
> -};
> -
> -&pwm13 {
> - /* pin 24 of header con2 */
> - /* shared with uart9 */
> - pinctrl-0 = <&pwm13m1_pins>;
> - status = "disabled";
> -};
> -
> -&pwm14 {
> - /* pin 23 of header con2 */
> - /* shared with spi3 */
> - pinctrl-0 = <&pwm14m1_pins>;
> - status = "disabled";
> -};
> -
> -&pwm15 {
> - /* pin 19 of header con2 */
> - /* shared with spi3 */
> - pinctrl-0 = <&pwm15m1_pins>;
> - status = "disabled";
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> };
>
> &sdhci {
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - non-removable;
> no-sd;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
> - status = "okay";
>
> partitions {
> compatible = "fixed-partitions";
> @@ -509,18 +43,6 @@
> };
>
> &sdmmc0 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - max-frequency = <150000000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "okay";
> -
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <2>;
> @@ -533,88 +55,6 @@
> };
> };
>
> -&uart0 {
> - /* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */
> - status = "disabled";
> -};
> -
> -&uart2 {
> - /* debug-uart */
> - status = "okay";
> -};
> -
> -&uart7 {
> - /* pin 11 (TX) + 13 (RX) of header con2 */
> - pinctrl-0 = <&uart7m1_xfer>;
> - status = "disabled";
> -};
> -
> -&uart9 {
> - /* pin 21 (TX) + 24 (RX) of header con2 */
> - /* shared with pwm13 and pwm12/spi3 */
> - pinctrl-0 = <&uart9m1_xfer>;
> - status = "disabled";
> -};
> -
> -&u2phy0_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&u2phy0_otg {
> - phy-supply = <&vcc5v0_usb_otg>;
> - status = "okay";
> -};
> -
> -/*&u2phy1_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&u2phy1_otg {
> - phy-supply = <&vcc5v0_usb_otg>;
> - status = "okay";
> -};*/
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -/*&usb2phy1 {
> - status = "okay";
> -};*/
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> &usb_host0_xhci {
> dr_mode = "host";
> - extcon = <&usb2phy0>;
> - status = "okay";
> -};
> -
> -&usb_host1_xhci {
> - dr_mode = "host";
> - status = "okay";
> -};
> -
> -&combphy0_us {
> - status = "okay";
> -};
> -
> -&combphy1_usq {
> - status = "okay";
> };
> --
> 2.34.1
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list