[PATCH 0/9] ARM: i.MX8MN: clean up and enable imx-usb-loader
Marco Felsch
m.felsch at pengutronix.de
Mon Aug 8 01:30:13 PDT 2022
On 22-08-05, Ahmad Fatoum wrote:
> This series applies on top of <20220714072722.2863571-1-s.hauer at pengutronix.de>
>
> Ahmad Fatoum (9):
> ARM: i.MX8M: move TF-A chainload functions in <mach/xload.h>
> ARM: i.MX8M: imx8mn-evk: use generic
> imx8mn_load_and_start_image_via_tfa
> ARM: i.MX8MN: add SDPS barebox-side support
> ARM: i.MX8MN: evk: simplify DDR4/LPDDR4 selection code
> ddr: imx8m: rename type to more fitting ddrc|dram_type
> ARM: i.MX8M: remove struct dram_timing_info::dram_type again
> pbl: generalize fsl i2c_early API into pbl_i2c
> i2c: add <pbl/pmic.h> for PBL use
> ARM: i.MX8M: use new pbl/pmic.h API
Hi Ahmad,
whole series LGTM.
Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>
>
> arch/arm/boards/ls1046ardb/lowlevel.c | 6 +-
> arch/arm/boards/mnt-reform/lowlevel.c | 28 +---
> arch/arm/boards/mnt-reform/lpddr4-timing.c | 1 -
> arch/arm/boards/nxp-imx8mm-evk/lowlevel.c | 58 +++-----
> .../arm/boards/nxp-imx8mm-evk/lpddr4-timing.c | 1 -
> arch/arm/boards/nxp-imx8mn-evk/ddr4-timing.c | 1 -
> arch/arm/boards/nxp-imx8mn-evk/lowlevel.c | 140 ++++--------------
> .../arm/boards/nxp-imx8mn-evk/lpddr4-timing.c | 1 -
> arch/arm/boards/nxp-imx8mp-evk/lowlevel.c | 61 +++-----
> .../arm/boards/nxp-imx8mp-evk/lpddr4-timing.c | 1 -
> .../boards/protonic-imx8m/lowlevel-prt8mm.c | 1 -
> .../protonic-imx8m/lpddr4-timing-prt8mm.c | 1 -
> arch/arm/mach-imx/atf.c | 40 ++++-
> arch/arm/mach-imx/include/mach/xload.h | 4 +
> common/ddr_spd.c | 24 ++-
> drivers/ddr/imx8m/ddr_init.c | 11 +-
> drivers/ddr/imx8m/ddrphy_train.c | 8 +-
> drivers/i2c/busses/i2c-imx-early.c | 21 ++-
> include/ddr_spd.h | 5 +-
> include/i2c/i2c-early.h | 13 --
> include/pbl/i2c.h | 37 +++++
> include/pbl/pmic.h | 41 +++++
> include/soc/imx8m.h | 9 --
> include/soc/imx8m/ddr.h | 79 +++++-----
> 24 files changed, 279 insertions(+), 313 deletions(-)
> delete mode 100644 include/i2c/i2c-early.h
> create mode 100644 include/pbl/i2c.h
> create mode 100644 include/pbl/pmic.h
> delete mode 100644 include/soc/imx8m.h
>
> --
> 2.30.2
>
>
More information about the barebox
mailing list