[PATCH] mci: bcm2835: Don't send MMC_CMD_GO_IDLE_STATE at the end of .init()

[Uwe Kleine-König]

The core sends this command anyhow shortly after calling .init(). So
doing it in bcm2835_mci_reset() is only overhead if it succeeds and
if there is a problem it is noticed a tad earlier which has little
benefit compared to the timeout in bcm2835_mci_wait_command_done().

So simplify and drop the transfer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/mci/mci-bcm2835.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/mci/mci-bcm2835.c b/drivers/mci/mci-bcm2835.c
index 4913dc27f8a3..10f588930cda 100644
--- a/drivers/mci/mci-bcm2835.c
+++ b/drivers/mci/mci-bcm2835.c
@@ -352,10 +352,7 @@ static int bcm2835_mci_reset(struct mci_host *mci, struct device_d *mci_dev)
 	sdhci_write32(&host->sdhci, SDHCI_INT_STATUS,
 			0xFFFFFFFF);
 
-	/*Now write command 0 and see if we get response*/
-	sdhci_write32(&host->sdhci, SDHCI_ARGUMENT, 0x0);
-	sdhci_write32(&host->sdhci, SDHCI_TRANSFER_MODE__COMMAND, 0x0);
-	return bcm2835_mci_wait_command_done(host);
+	return 0;
 }
 
 static int bcm2835_mci_probe(struct device_d *hw_dev)

base-commit: f2dd8896846757829fb3033f41b89be3fc037d78
-- 
2.30.2