[PATCH v2 1/6] flash-header-phytec-pcl063: Set SOC voltage to 1.25 V during boot

Andrej Picej andrej.picej at norik.com
Fri Nov 19 01:54:24 PST 2021


From: Stefan Riedmueller <s.riedmueller at phytec.de>

To increase stability during boot in cold conditions (< -30 °C) increase
the SOC voltage from 1.15 V to 1.25 V in DCD. The ARM voltage is left
unchanged at its default 1.15 V.

Signed-off-by: Stefan Riedmueller <s.riedmueller at phytec.de>
Signed-off-by: Andrej Picej <andrej.picej at norik.com>
---
Changes in v2:
 - no changes
---
 arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h b/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h
index 9a8f5f18e..8e0ab6f58 100644
--- a/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h
+++ b/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063.h
@@ -3,6 +3,8 @@ loadaddr 0x80000000
 soc imx6
 ivtofs 0x400
 
+wm 32 0x020c8140 0x00580012
+
 wm 32 0x020c4068 0xffffffff
 wm 32 0x020c406c 0xffffffff
 wm 32 0x020c4070 0xffffffff
-- 
2.25.1




More information about the barebox mailing list