[PATCH v1 1/2] arm: boards: Add support for PRTT1x STM32MP151 based boards
Ahmad Fatoum
a.fatoum at pengutronix.de
Wed Nov 17 04:08:04 PST 2021
Hello Oleksij,
On 17.11.21 12:38, Oleksij Rempel wrote:
> From: David Jander <david at protonic.nl>
>
> - PRTT1A is a very simple 10Base-T1L Ethernet to 0-10V output converter
> module.
> - PRTT1S is a CO2- and RH measurement module with 10Base-T1L and PoDL power
> sink.
> - PRTT1C is a "white box switch" device, meant to control the other members
> of the PRTT1L family of devices, connected via 10Base-T1L and PoDL power.
>
> All arch/arm/dts/stm32mp151-prtt1X.dtsi files will be removed after
> kernel mainlining is done.
>
> Signed-off-by: David Jander <david at protonic.nl>
> Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
> ---
> arch/arm/boards/Makefile | 1 +
> arch/arm/boards/protonic-stm32mp1/Makefile | 2 +
> arch/arm/boards/protonic-stm32mp1/board.c | 38 +++
> arch/arm/boards/protonic-stm32mp1/lowlevel.c | 56 ++++
> arch/arm/dts/Makefile | 4 +
> arch/arm/dts/stm32mp151-prtt1a.dts | 36 ++
> arch/arm/dts/stm32mp151-prtt1a.dtsi | 38 +++
> arch/arm/dts/stm32mp151-prtt1c.dts | 40 +++
> arch/arm/dts/stm32mp151-prtt1c.dtsi | 325 +++++++++++++++++++
> arch/arm/dts/stm32mp151-prtt1l.dtsi | 264 +++++++++++++++
> arch/arm/dts/stm32mp151-prtt1s.dts | 36 ++
> arch/arm/dts/stm32mp151-prtt1s.dtsi | 48 +++
> arch/arm/mach-stm32mp/Kconfig | 7 +
> images/Makefile.stm32mp | 9 +
> 14 files changed, 904 insertions(+)
> create mode 100644 arch/arm/boards/protonic-stm32mp1/Makefile
> create mode 100644 arch/arm/boards/protonic-stm32mp1/board.c
> create mode 100644 arch/arm/boards/protonic-stm32mp1/lowlevel.c
> create mode 100644 arch/arm/dts/stm32mp151-prtt1a.dts
> create mode 100644 arch/arm/dts/stm32mp151-prtt1a.dtsi
> create mode 100644 arch/arm/dts/stm32mp151-prtt1c.dts
> create mode 100644 arch/arm/dts/stm32mp151-prtt1c.dtsi
> create mode 100644 arch/arm/dts/stm32mp151-prtt1l.dtsi
> create mode 100644 arch/arm/dts/stm32mp151-prtt1s.dts
> create mode 100644 arch/arm/dts/stm32mp151-prtt1s.dtsi
>
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index b7a72d5ba0..08815d79ec 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -107,6 +107,7 @@ obj-$(CONFIG_MACH_PM9263) += pm9263/
> obj-$(CONFIG_MACH_PM9G45) += pm9g45/
> obj-$(CONFIG_MACH_PROTONIC_IMX6) += protonic-imx6/
> obj-$(CONFIG_MACH_PROTONIC_IMX8M) += protonic-imx8m/
> +obj-$(CONFIG_MACH_PROTONIC_STM32MP1) += protonic-stm32mp1/
> obj-$(CONFIG_MACH_QIL_A9260) += qil-a926x/
> obj-$(CONFIG_MACH_QIL_A9G20) += qil-a926x/
> obj-$(CONFIG_MACH_RADXA_ROCK) += radxa-rock/
> diff --git a/arch/arm/boards/protonic-stm32mp1/Makefile b/arch/arm/boards/protonic-stm32mp1/Makefile
> new file mode 100644
> index 0000000000..092c31d6b2
> --- /dev/null
> +++ b/arch/arm/boards/protonic-stm32mp1/Makefile
> @@ -0,0 +1,2 @@
> +lwl-y += lowlevel.o
> +obj-y += board.o
> diff --git a/arch/arm/boards/protonic-stm32mp1/board.c b/arch/arm/boards/protonic-stm32mp1/board.c
> new file mode 100644
> index 0000000000..7edf7e96ff
> --- /dev/null
> +++ b/arch/arm/boards/protonic-stm32mp1/board.c
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +#include <bootsource.h>
> +#include <common.h>
> +#include <init.h>
> +#include <mach/bbu.h>
> +
> +static int t1a_probe(struct device_d *dev)
> +{
> + int flags;
> +
> + flags = bootsource_get_instance() == 0 ? BBU_HANDLER_FLAG_DEFAULT : 0;
> + stm32mp_bbu_mmc_register_handler("sd", "/dev/mmc0.ssbl", flags);
> +
> + flags = bootsource_get_instance() == 1 ? BBU_HANDLER_FLAG_DEFAULT : 0;
> + stm32mp_bbu_mmc_register_handler("emmc", "/dev/mmc1.ssbl", flags);
> +
> + if (bootsource_get_instance() == 0)
> + of_device_enable_path("/chosen/environment-sd");
> + else
> + of_device_enable_path("/chosen/environment-emmc");
You enable selectively here.
> +
> + return 0;
> +}
> +
> +static const struct of_device_id t1a_of_match[] = {
> + { .compatible = "prt,prtt1a" },
> + { .compatible = "prt,prtt1c" },
> + { .compatible = "prt,prtt1s" },
> + { /* sentinel */ },
> +};
> +
> +static struct driver_d t1a_board_driver = {
> + .name = "board-prtt1l",
> + .probe = t1a_probe,
> + .of_compatible = t1a_of_match,
> +};
> +postcore_platform_driver(t1a_board_driver);
> diff --git a/arch/arm/boards/protonic-stm32mp1/lowlevel.c b/arch/arm/boards/protonic-stm32mp1/lowlevel.c
> new file mode 100644
> index 0000000000..6bbbf3e067
> --- /dev/null
> +++ b/arch/arm/boards/protonic-stm32mp1/lowlevel.c
> @@ -0,0 +1,56 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <common.h>
> +#include <mach/entry.h>
> +#include <debug_ll.h>
> +
> +extern char __dtb_z_stm32mp151_prtt1a_start[];
> +extern char __dtb_z_stm32mp151_prtt1c_start[];
> +extern char __dtb_z_stm32mp151_prtt1s_start[];
> +
> +static void setup_uart(void)
> +{
> + /* first stage has set up the UART, so nothing to do here */
> + putc_ll('>');
> +}
> +
> +ENTRY_FUNCTION(start_prtt1a, r0, r1, r2)
> +{
> + void *fdt;
> +
> + stm32mp_cpu_lowlevel_init();
> +
> + if (IS_ENABLED(CONFIG_DEBUG_LL))
> + setup_uart();
> +
> + fdt = __dtb_z_stm32mp151_prtt1a_start + get_runtime_offset();
> +
> + stm32mp1_barebox_entry(fdt);
> +}
> +
> +ENTRY_FUNCTION(start_prtt1c, r0, r1, r2)
> +{
> + void *fdt;
> +
> + stm32mp_cpu_lowlevel_init();
> +
> + if (IS_ENABLED(CONFIG_DEBUG_LL))
> + setup_uart();
> +
> + fdt = __dtb_z_stm32mp151_prtt1c_start + get_runtime_offset();
> +
> + stm32mp1_barebox_entry(fdt);
> +}
> +
> +ENTRY_FUNCTION(start_prtt1s, r0, r1, r2)
> +{
> + void *fdt;
> +
> + stm32mp_cpu_lowlevel_init();
> +
> + if (IS_ENABLED(CONFIG_DEBUG_LL))
> + setup_uart();
> +
> + fdt = __dtb_z_stm32mp151_prtt1s_start + get_runtime_offset();
> +
> + stm32mp1_barebox_entry(fdt);
> +}
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 7da366bda0..76c96752cd 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -95,6 +95,10 @@ lwl-$(CONFIG_MACH_PROTONIC_IMX6) += \
> imx6ul-prti6g.dtb.o \
> imx6ull-jozacp.dtb.o
> lwl-$(CONFIG_MACH_PROTONIC_IMX8M) += imx8mm-prt8mm.dtb.o
> +lwl-$(CONFIG_MACH_PROTONIC_STM32MP1) += \
> + stm32mp151-prtt1a.dtb.o \
> + stm32mp151-prtt1c.dtb.o \
> + stm32mp151-prtt1s.dtb.o
> lwl-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
> lwl-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
> lwl-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
> diff --git a/arch/arm/dts/stm32mp151-prtt1a.dts b/arch/arm/dts/stm32mp151-prtt1a.dts
> new file mode 100644
> index 0000000000..576ad54a28
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp151-prtt1a.dts
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> +
> +#include "stm32mp151-prtt1a.dtsi"
> +#include "stm32mp151.dtsi"
> +
> +/ {
> + chosen {
> + environment-sd {
> + compatible = "barebox,environment";
> + device-path = &sdmmc1, "partname:barebox-environment";
> + status = "okay";
> + };
> +
> + environment-emmc {
> + compatible = "barebox,environment";
> + device-path = &sdmmc2, "partname:barebox-environment";
> + status = "okay";
> + };
But both are already enabled. You probably meant to set disabled for both.
> + };
> +};
> +
> +&usbh_ehci {
> + status = "disabled";
> +};
> +
> +&usbotg_hs {
> + status = "disabled";
> +};
> +
> +&usbphyc {
> + status = "disabled";
> +};
> +
> +&usbphyc_port1 {
> + status = "disabled";
> +};
> diff --git a/arch/arm/dts/stm32mp151-prtt1a.dtsi b/arch/arm/dts/stm32mp151-prtt1a.dtsi
> new file mode 100644
> index 0000000000..5042111742
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp151-prtt1a.dtsi
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) Protonic Holland
> + * Author: David Jander <david at protonic.nl>
> + */
> +/dts-v1/;
> +
> +#include "stm32mp151-prtt1l.dtsi"
> +
> +/ {
> + model = "Protonic PRTT1A";
> + compatible = "prt,prtt1a", "st,stm32mp151";
> +};
> +
> +&timers5 {
> + status = "okay";
> + pwm {
> + pinctrl-0 = <&pwm5_pins_a>;
> + pinctrl-1 = <&pwm5_sleep_pins_a>;
> + pinctrl-names = "default", "sleep";
> + status = "okay";
> + };
> + timer at 1 {
> + status = "okay";
> + };
> +};
> +
> +&pwm5_pins_a {
> + pins {
> + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
> + };
> +};
> +
> +&pwm5_sleep_pins_a {
> + pins {
> + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
> + };
> +};
> diff --git a/arch/arm/dts/stm32mp151-prtt1c.dts b/arch/arm/dts/stm32mp151-prtt1c.dts
> new file mode 100644
> index 0000000000..658d691913
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp151-prtt1c.dts
> @@ -0,0 +1,40 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> +
> +#include "stm32mp151-prtt1c.dtsi"
> +#include "stm32mp151.dtsi"
> +
> +/ {
> + chosen {
> + environment-sd {
> + compatible = "barebox,environment";
> + device-path = &sdmmc1, "partname:barebox-environment";
> + status = "okay";
> + };
> +
> + environment-emmc {
> + compatible = "barebox,environment";
> + device-path = &sdmmc2, "partname:barebox-environment";
> + status = "okay";
> + };
> + };
> +};
> +
> +&sdmmc3 {
> + status = "disabled";
> +};
> +
> +&usbh_ehci {
> + status = "disabled";
> +};
> +
> +&usbotg_hs {
> + status = "disabled";
> +};
> +
> +&usbphyc {
> + status = "disabled";
> +};
> +
> +&usbphyc_port1 {
> + status = "disabled";
> +};
> diff --git a/arch/arm/dts/stm32mp151-prtt1c.dtsi b/arch/arm/dts/stm32mp151-prtt1c.dtsi
> new file mode 100644
> index 0000000000..c8951a0705
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp151-prtt1c.dtsi
> @@ -0,0 +1,325 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) Protonic Holland
> + * Author: David Jander <david at protonic.nl>
> + */
> +/dts-v1/;
> +
> +#include "stm32mp151-prtt1l.dtsi"
> +
> +/ {
> + model = "Protonic PRTT1C";
> + compatible = "prt,prtt1c", "st,stm32mp151";
> +
> + clock_sja1105: clock-sja1105 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + wfx_pwrseq: wfx_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&qspi {
> + status = "disabled";
> +};
> +
> +ðernet0 {
> + /delete-property/phy-reset-gpios;
> + max-speed = <100>;
> +
> + fixed-link {
> + speed = <100>;
> + full-duplex;
> + };
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> +
> + /* Switch port 0, DP83TD510 * /
> + t1l0_phy: ethernet-phy at 6 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <6>;
> + max-speed = <10>;
> + interrupt-parent = <&gpioa>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + /* Switch port 1, DP83TD510 * /
> + t1l1_phy: ethernet-phy at 7 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <7>;
> + max-speed = <10>;
> + interrupt-parent = <&gpiog>;
> + interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>;
> + };
> +
> + /* Switch port 2, DP83TD510 * /
> + t1l2_phy: ethernet-phy at 10 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <10>;
> + max-speed = <10>;
> + interrupt-parent = <&gpiog>;
> + interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>;
> + };
> +
> + /* Switch port 3, KSZ9131 */
> + rj45_phy: ethernet-phy at 2 {
> + reg = <2>;
> + max-speed = <100>;
> + interrupt-parent = <&gpiog>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&spi1 {
> + /delete-property/dmas;
> + /delete-property/dma-names;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi1_pins_a1>;
> + cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + switch at 0 {
> + compatible = "nxp,sja1105q";
> + reg = <0>;
> + spi-max-frequency = <4000000>;
> + spi-rx-delay-us = <1>;
> + spi-tx-delay-us = <1>;
> + spi-cpha;
> +
> + reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>;
> +
> + clocks = <&clock_sja1105>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + label = "t1l0";
> + phy-mode = "rmii";
> +
> + fixed-link {
> + speed = <10>;
> + full-duplex;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + label = "t1l1";
> + phy-mode = "rmii";
> +
> + fixed-link {
> + speed = <10>;
> + full-duplex;
> + };
> + };
> +
> + port at 2 {
> + reg = <2>;
> + label = "t1l2";
> + phy-mode = "rmii";
> +
> + fixed-link {
> + speed = <10>;
> + full-duplex;
> + };
> + };
> +
> + port at 3 {
> + reg = <3>;
> + label = "rj45";
> + phy-handle = <&rj45_phy>;
> + phy-mode = "rgmii-id";
> + };
> +
> + port at 4 {
> + reg = <4>;
> + label = "cpu";
> + ethernet = <ðernet0>;
> + phy-mode = "rmii";
> +
> + fixed-link {
> + speed = <100>;
> + full-duplex;
> + };
> + };
> + };
> + };
> +};
> +
> +&sdmmc2 {
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
> + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
> + disable-wp;
> + disable-cd;
> + none-removable;
no-removable
> + no-sd;
> + no-sdio;
> + no-1-8-v;
> + st,neg-edge;
> + bus-width = <8>;
> + vmmc-supply = <&v3v3>;
> + vqmmc-supply = <&v3v3>;
> + status = "okay";
> +};
> +
> +&sdmmc3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc3_b4_pins_b>;
> + pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
> + pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
> + disable-wp;
> + disable-cd;
> + none-removable;
> + no-1-8-v;
> + st,neg-edge;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + bus-width = <4>;
> + vmmc-supply = <&v3v3>;
> + vqmmc-supply = <&v3v3>;
> + mmc-pwrseq = <&wfx_pwrseq>;
> + status = "okay";
> +
> + mmc at 1 {
> + compatible = "silabs,wf200";
> + reg = <1>;
> + };
> +};
> +
> +&pinctrl {
> + spi1_pins_a1: spi1-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
> + <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <1>;
> + };
> +
> + pins2 {
> + pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
> + bias-disable;
> + };
> + };
> +};
> +
> +&sdmmc2_b4_pins_a {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
> + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
> + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
> + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
> + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
> + };
> +};
> +
> +&sdmmc2_b4_od_pins_a {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
> + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
> + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
> + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
> + };
> +};
> +
> +&sdmmc2_b4_sleep_pins_a {
> + pins {
> + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
> + <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
> + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
> + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
> + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
> + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
> + };
> +};
> +
> +&sdmmc2_d47_pins_a {
> + pins {
> + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
> + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
> + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
> + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
> + };
> +};
> +
> +&sdmmc2_d47_sleep_pins_a {
> + pins {
> + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
> + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
> + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
> + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
> + };
> +};
> +
> +&sdmmc3_b4_pins_b {
> + pins1 {
> + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
> + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
> + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
> + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
> + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
> + };
> +};
> +
> +&sdmmc3_b4_od_pins_b {
> + pins1 {
> + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
> + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
> + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
> + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
> + };
> +};
> +
> +&sdmmc3_b4_sleep_pins_b {
> + pins {
> + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
> + <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
> + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
> + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
> + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
> + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
> + };
> +};
> +
> +&gpioa {
> + gpio-line-names =
> + "", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "",
> + "", "", "", "", "", "", "", "SPI1_nSS";
> +};
> +
> +&gpiod {
> + gpio-line-names =
> + "", "", "", "", "", "", "", "",
> + "WFM_RESET", "", "", "", "", "", "", "";
> +};
> +
> +&gpioe {
> + gpio-line-names =
> + "SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "",
> + "", "", "", "", "WFM_nIRQ", "", "", "";
> +};
> +
> +&gpiog {
> + gpio-line-names =
> + "", "", "", "", "", "", "", "PHY3_nINT",
> + "PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET", "PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", "";
> +};
> diff --git a/arch/arm/dts/stm32mp151-prtt1l.dtsi b/arch/arm/dts/stm32mp151-prtt1l.dtsi
> new file mode 100644
> index 0000000000..a7360f8156
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp151-prtt1l.dtsi
> @@ -0,0 +1,264 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) Protonic Holland
> + * Author: David Jander <david at protonic.nl>
> + */
> +/dts-v1/;
> +
> +#include <arm/stm32mp151.dtsi>
> +#include <arm/stm32mp15-pinctrl.dtsi>
> +#include <arm/stm32mp15xxad-pinctrl.dtsi>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + aliases {
> + serial0 = &uart4;
> + ethernet0 = ðernet0;
> + };
> +
> + memory at c0000000 {
> + device_type = "memory";
> + reg = <0xC0000000 0x10000000>;
> + };
What's wrong with autodetection?
> +
> + v3v3: fixed-regulator-v3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "v3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + led {
> + compatible = "gpio-leds";
> +
> + led-0 {
> + label = "debug:red";
> + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
> + };
> +
> + led-1 {
> + label = "debug:green";
> + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> +};
> +
> +ðernet0 {
> + status = "okay";
> + pinctrl-0 = <ðernet0_rmii_pins_a>;
> + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>;
> + pinctrl-names = "default", "sleep";
> + phy-mode = "rmii";
> + phy-reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
> + max-speed = <10>;
> +/*
> + fixed-link {
> + speed = <10>;
> + full-duplex;
> + };
> +*/
fixed-link should be ok now, with 6269556397ed
("net: eqos: let phy_resume handle fixed link phys")
> + phy-handle = <&phy0>;
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + phy0: ethernet-phy at 0 {
> + reg = <0>;
> + interrupt-parent = <&gpioa>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> + };
> + };
> +};
> +
> +&qspi {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
> + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
> + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + flash0: w25n512gvpit at 0 {
> + compatible = "jedec,spi-nand";
> + reg = <0>;
> + spi-rx-bus-width = <4>;
> + spi-max-frequency = <104000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + fsbl1 at 0 {
> + label = "fsbl1";
> + reg = <0x0 0x40000>;
> + };
> +
> + fsbl2 at 40000 {
> + label = "fsbl2";
> + reg = <0x40000 0x40000>;
> + };
> +
> + ssbl at 80000 {
> + label = "fsbl2";
> + reg = <0x80000 0x100000>;
> + };
> +
> + ubi at 180000 {
> + label = "ubi";
> + reg = <0x180000 0x3e80000>;
> + };
> + };
> + };
> +};
QSPI driver next? :>
> +
> +&usbh_ehci {
> + phys = <&usbphyc_port0>;
> + phy-names = "usb";
> + status = "okay";
> +};
> +
> +&usbotg_hs {
> + dr_mode = "host";
> + pinctrl-0 = <&usbotg_hs_pins_a>;
> + pinctrl-names = "default";
> + phys = <&usbphyc_port1 0>;
> + phy-names = "usb2-phy";
> + status = "okay";
> +};
> +
> +&usbphyc {
> + status = "okay";
> +};
> +
> +&usbphyc_port1 {
> + phy-supply = <&v3v3>;
> +};
> +
> +&sdmmc1 {
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc1_b4_pins_a>;
> + pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
> + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
> + /* cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; */
> + disable-wp;
> + disable-cd;
> + /* st,sig-dir; */
> + st,neg-edge;
> + /* st,use-ckin; */
> + bus-width = <4>;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
> + sd-uhs-ddr50;
> + vmmc-supply = <&v3v3>;
> + vqmmc-supply = <&v3v3>;
> + status = "okay";
> +};
> +
> +&sdmmc1_b4_pins_a {
> + pins1 {
> + bias-pull-up;
> + };
> + pins2 {
> + bias-pull-up;
> + };
> +};
> +
> +&sdmmc1_b4_od_pins_a {
> + pins1 {
> + bias-pull-up;
> + };
> + pins2 {
> + bias-pull-up;
> + };
> +};
> +
> +&uart4 {
> + pinctrl-names = "default", "sleep", "idle";
> + pinctrl-0 = <&uart4_pins_a>;
> + pinctrl-1 = <&uart4_sleep_pins_a>;
> + pinctrl-2 = <&uart4_idle_pins_a>;
> + status = "okay";
> +};
> +
> +&uart4_pins_a {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> + bias-pull-up;
> + };
> +};
> +
> +&uart4_idle_pins_a {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> + bias-pull-up;
> + };
> +};
> +
> +&uart4_sleep_pins_a {
> + pins {
> + pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
> + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
> + };
> +};
> +
> +ðernet0_rmii_pins_a {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
> + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
> + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
> + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
> + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
> + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
> + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */
> + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
> + };
> +};
> +
> +ðernet0_rmii_sleep_pins_a {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
> + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
> + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
> + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
> + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
> + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
> + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
> + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
> + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
> + };
> +};
> +
> +&qspi_bk1_pins_a {
> + pins1 {
> + bias-pull-up;
> + drive-push-pull;
> + slew-rate = <1>;
> + };
> +};
> diff --git a/arch/arm/dts/stm32mp151-prtt1s.dts b/arch/arm/dts/stm32mp151-prtt1s.dts
> new file mode 100644
> index 0000000000..8949194742
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp151-prtt1s.dts
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> +
> +#include "stm32mp151-prtt1s.dtsi"
> +#include "stm32mp151.dtsi"
> +
> +/ {
> + chosen {
> + environment-sd {
> + compatible = "barebox,environment";
> + device-path = &sdmmc1, "partname:barebox-environment";
> + status = "okay";
> + };
> +
> + environment-emmc {
> + compatible = "barebox,environment";
> + device-path = &sdmmc2, "partname:barebox-environment";
> + status = "okay";
> + };
> + };
As above.
> +};
> +
> +&usbh_ehci {
> + status = "disabled";
> +};
> +
> +&usbotg_hs {
> + status = "disabled";
> +};
> +
> +&usbphyc {
> + status = "disabled";
> +};
> +
> +&usbphyc_port1 {
> + status = "disabled";
> +};
> diff --git a/arch/arm/dts/stm32mp151-prtt1s.dtsi b/arch/arm/dts/stm32mp151-prtt1s.dtsi
> new file mode 100644
> index 0000000000..0f4638787a
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp151-prtt1s.dtsi
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) Protonic Holland
> + * Author: David Jander <david at protonic.nl>
> + */
> +/dts-v1/;
> +
> +#include "stm32mp151-prtt1l.dtsi"
> +
> +/ {
> + model = "Protonic PRTT1S";
> + compatible = "prt,prtt1s", "st,stm32mp151";
> +};
> +
> +&i2c1 {
> + status = "okay";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c1_pins_a>;
> + pinctrl-1 = <&i2c1_sleep_pins_a>;
> + clock-frequency = <100000>;
> + /delete-property/dmas;
> + /delete-property/dma-names;
> +
> + hdc1080 at 40 {
> + compatible = "ti,hdc1080";
> + reg = <0x40>;
> + };
> +
> + scd41 at 62 {
> + compatible = "sensirion,scd41";
> + reg = <0x62>;
> + };
> +};
> +
> +
> +&i2c1_pins_a {
> + pins {
> + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
> + <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
> + };
> +};
> +
> +&i2c1_sleep_pins_a {
> + pins {
> + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
> + <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
> + };
> +};
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index 95d3dc510d..8328eb899a 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -31,4 +31,11 @@ config MACH_STM32MP15X_EV1
> as SSBL on any STM32MP15X-EVAL platform, like the
> STM32MP157C-EV1
>
> +config MACH_PROTONIC_STM32MP1
> + select ARCH_STM32MP157
> + bool "Protonic PRTT1L family of boards"
> + help
> + Builds all barebox-prtt1*.img that can be deployed as SSBL
> + on the respective PRTT1L family board
> +
> endif
> diff --git a/images/Makefile.stm32mp b/images/Makefile.stm32mp
> index 3384f5014b..17f03908b0 100644
> --- a/images/Makefile.stm32mp
> +++ b/images/Makefile.stm32mp
> @@ -23,6 +23,15 @@ FILE_barebox-stm32mp157c-lxa-mc1.img = start_stm32mp157c_lxa_mc1.pblb.stm32
> OPTS_start_stm32mp157c_lxa_mc1.pblb.stm32 = $(STM32MP1_OPTS)
> image-$(CONFIG_MACH_LXA_MC1) += barebox-stm32mp157c-lxa-mc1.img
>
> +pblb-$(CONFIG_MACH_PROTONIC_STM32MP1) += start_prtt1a start_prtt1s start_prtt1c
> +FILE_barebox-prtt1a.img = start_prtt1a.pblb.stm32
> +FILE_barebox-prtt1c.img = start_prtt1c.pblb.stm32
> +FILE_barebox-prtt1s.img = start_prtt1s.pblb.stm32
> +OPTS_start_prtt1a.pblb.stm32 = $(STM32MP1_OPTS)
> +OPTS_start_prtt1c.pblb.stm32 = $(STM32MP1_OPTS)
> +OPTS_start_prtt1s.pblb.stm32 = $(STM32MP1_OPTS)
> +image-$(CONFIG_MACH_PROTONIC_STM32MP1) += barebox-prtt1a.img barebox-prtt1s.img barebox-prtt1c.img
If you could detect at runtime (or get from TF-A) information about
which board you're on, you could use one image for all three.
> +
> pblb-$(CONFIG_MACH_SEEED_ODYSSEY) += start_stm32mp157c_seeed_odyssey
> FILE_barebox-stm32mp157c-seeed-odyssey.img = start_stm32mp157c_seeed_odyssey.pblb.stm32
> OPTS_start_stm32mp157c_seeed_odyssey.pblb.stm32 = $(STM32MP1_OPTS)
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list