[PATCH 2/5] ARM: configs: phytec-som-imx6.config

[Andrej Picej]

Create PHYTEC specific i.MX6 SoM config fragment, which is intended to
be merged with the default imx_v7_defconfig. This way, one can clearly
outline the differences between standard defconfig and changes PHYTEC
makes for i.MX6 SoMs in their BSP. Nonetheless, at the same time, this
minimizes efforts required to port patches to defconfig with each new
PHYTEC BSP release.

For now:
     - disable BLSPEC,
     - disable IPU driver,
     - enable of_fixup_status command,
     - enable of_overlay command,
     - enable of_display_timings command and
     - enable OCOTP fuse writing ability.

To manually configure PHYTEC i.MX6 board, config merge can be triggered
with:
$ ./scripts/kconfig/merge_config.sh -m arch/arm/config /imx_v7_defconfig
arch/arm/configs/phytec-som-imx6.config && make olddefconfig

Signed-off-by: Andrej Picej <andrej.picej at norik.com>
---
 arch/arm/configs/phytec-som-imx6.config | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 arch/arm/configs/phytec-som-imx6.config

diff --git a/arch/arm/configs/phytec-som-imx6.config b/arch/arm/configs/phytec-som-imx6.config
new file mode 100644
index 000000000..a7d5bae59
--- /dev/null
+++ b/arch/arm/configs/phytec-som-imx6.config
@@ -0,0 +1,10 @@
+# CONFIG_BLSPEC is not set
+CONFIG_CMD_OF_OVERLAY=y
+CONFIG_CMD_OF_DISPLAY_TIMINGS=y
+CONFIG_CMD_OF_FIXUP_STATUS=y
+# CONFIG_DRIVER_VIDEO_IMX_IPUV3 is not set
+# CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS is not set
+# CONFIG_DRIVER_VIDEO_IMX_IPUV3_HDMI is not set
+# CONFIG_DRIVER_VIDEO_SIMPLEFB is not set
+# CONFIG_DRIVER_VIDEO_EDID is not set
+CONFIG_IMX_OCOTP_WRITE=y
-- 
2.25.1