[PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
Ahmad Fatoum
a.fatoum at pengutronix.de
Fri Nov 5 00:51:01 PDT 2021
Hello Sascha,
On 04.10.21 13:39, Ahmad Fatoum wrote:
> Hello Sascha,
>
> On 04.10.21 13:26, Sascha Hauer wrote:
>> On Tue, Aug 31, 2021 at 05:32:14PM +0200, Ahmad Fatoum wrote:
>>> The STM32MP1 boards call their mdio subnode mdio0, which is now skipped
>>> since ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node").
>>>
>>> Fix networking for them by only falling back to the mdio node name when a
>>> child node with the correct compatible could not be found.
>>>
>>> Fixes: ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node")
>>> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
>>> ---
>>> drivers/net/designware_eqos.c | 6 +++++-
>>> 1 file changed, 5 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
>>> index f83ec127143c..5eee844e289a 100644
>>> --- a/drivers/net/designware_eqos.c
>>> +++ b/drivers/net/designware_eqos.c
>>> @@ -824,6 +824,7 @@ static void eqos_probe_dt(struct device_d *dev, struct eqos *eqos)
>>>
>>> int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
>>> {
>>> + struct device_node *np = dev->device_node;
>>> struct mii_bus *miibus;
>>> struct resource *iores;
>>> struct eqos *eqos;
>>> @@ -862,7 +863,10 @@ int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
>>> miibus->read = eqos_mdio_read;
>>> miibus->write = eqos_mdio_write;
>>> miibus->priv = eqos;
>>> - miibus->dev.device_node = of_get_child_by_name(dev->device_node, "mdio");
>>> +
>>> + miibus->dev.device_node = of_get_compatible_child(np, "snps,dwmac-mdio");
>>> + if (!miibus->dev.device_node)
>>> + miibus->dev.device_node = of_get_child_by_name(np, "mdio");
>>
>> Do we need this fallback? I think I introduced ed8c7bdf8592 for the
>> rk3568, which also should work without the fallback.
>
> Linux driver uses "mdio" node name for snps,dwc-qos-ethernet-4.10 and looks
> at compatible otherwise. That's why I chose to keep support for both.
STM32MP1 support in master is broken. Can this be cherry picked?
Thanks,
Ahmad
>
>>
>> Sascha
>>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list