[PATCH 0/7] net: phy: dp83867: cleanup and link downshift support

[Sascha Hauer]

On Fri, Mar 19, 2021 at 02:10:09PM +0100, Michael Tretter wrote:
> Hello,
> 
> the dp83867 network phy supports link downshift, if a gigabit link cannot be
> established. For example, this can happen if the cabling does not support
> gigabit Ethernet.
> 
> This series enables the downshift by default (Linux also enables it by
> default). Additionally, the link status is read from the dp83867-specific
> register to take the possible downshift into account when reporting the link
> speed.
> 
> Furthermore, the series contains a handful of cleanup patches.
> 
> Michael

Applied, thanks

Sascha

> 
> Michael Tretter (3):
>   net: phy: dp83867: convert driver to spdx
>   net: phy: dp83867: fix checkpatch checks and warnings
>   net: phy: dp83867: remove useless call to genphy_config_aneg
> 
> Thomas Haemmerle (4):
>   net: phy: dp83867: simplify dp83867_config_init
>   net: phy: dp83867: remove explicit setting of cfg2
>   net: phy: dp83867: read status from PHY status register PHYSTS
>   net: phy: dp83867: enable link downshift by default
> 
>  drivers/net/phy/dp83867.c | 169 ++++++++++++++++++++------------------
>  1 file changed, 90 insertions(+), 79 deletions(-)
> 
> -- 
> 2.29.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |