[PATCH v2 02/20] images: make BOARD_ARM_GENERIC_DT available for other arches

[Ahmad Fatoum]

Other architectures would benefit from the generic DT image too.
Add a new arch-agnostic symbol that arches besides ARM can select.

The new symbol itself should not have a prompt as the help text for
each architecture likely differs (e.g. device tree handoff register).

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 arch/arm/Kconfig | 2 +-
 images/Makefile  | 4 ++--
 pbl/Kconfig      | 4 ++++
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a1f781b60f95..3b983c8b3d0a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -323,7 +323,7 @@ config BOARD_ARM_VIRT
 	select OF_OVERLAY
 
 config BOARD_ARM_GENERIC_DT
-	select LIBFDT
+	select BOARD_GENERIC_DT
 	select ARM_AMBA
 	depends on HAVE_PBL_MULTI_IMAGES
 	depends on OFDEVICE
diff --git a/images/Makefile b/images/Makefile
index b8899dcd2a81..84492a154d16 100644
--- a/images/Makefile
+++ b/images/Makefile
@@ -166,9 +166,9 @@ include $(srctree)/images/Makefile.zynqmp
 include $(srctree)/images/Makefile.layerscape
 
 
-pblb-$(CONFIG_BOARD_ARM_GENERIC_DT) += start_dt_2nd
+pblb-$(CONFIG_BOARD_GENERIC_DT) += start_dt_2nd
 FILE_barebox-dt-2nd.img = start_dt_2nd.pblb
-image-$(CONFIG_BOARD_ARM_GENERIC_DT) += barebox-dt-2nd.img
+image-$(CONFIG_BOARD_GENERIC_DT) += barebox-dt-2nd.img
 
 ifdef CONFIG_ARM
 pblb-$(CONFIG_PBL_SINGLE_IMAGE) += start_pbl
diff --git a/pbl/Kconfig b/pbl/Kconfig
index 6e8cc3ac04ae..2eea5aef7a30 100644
--- a/pbl/Kconfig
+++ b/pbl/Kconfig
@@ -40,6 +40,10 @@ config PBL_VERIFY_PIGGY
 	depends on ARM
 	bool
 
+config BOARD_GENERIC_DT
+	bool
+	select LIBFDT
+
 config IMAGE_COMPRESSION
 	bool
 	depends on HAVE_IMAGE_COMPRESSION
-- 
2.29.2