[PATCH 1/7] ARM: zynqmp: set reset source

[Ahmad Fatoum]

On 24.06.21 12:23, Michael Tretter wrote:
> The reset reason is available in the APB register set on the ZynqMP.
> Read the reset reason and set the reset source accordingly.
> 
> There might be multiple bits set in the APB register. Use the MSB for
> determining the actual reset source.

APB is usually the AMBA Advanced Peripheral Bus. Perhaps CRL is the
actual name of the register and APB just tells that it's mapped there?

> 
> Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
> ---
>  arch/arm/mach-zynqmp/Makefile              |  1 +
>  arch/arm/mach-zynqmp/include/mach/zynqmp.h |  6 ++
>  arch/arm/mach-zynqmp/zynqmp.c              | 74 ++++++++++++++++++++++
>  3 files changed, 81 insertions(+)
>  create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp.h
>  create mode 100644 arch/arm/mach-zynqmp/zynqmp.c
> 
> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> index 021efc94afaf..14b8a4e46b87 100644
> --- a/arch/arm/mach-zynqmp/Makefile
> +++ b/arch/arm/mach-zynqmp/Makefile
> @@ -1,2 +1,3 @@
>  # SPDX-License-Identifier: GPL-2.0-or-later
>  obj-y += firmware-zynqmp.o
> +obj-y += zynqmp.o
> diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp.h b/arch/arm/mach-zynqmp/include/mach/zynqmp.h
> new file mode 100644
> index 000000000000..f6c05f35a470
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp.h

Nitpick: revision.h sounds more self-describing.

> @@ -0,0 +1,6 @@
> +#ifndef __MACH_ZYNQMP_H
> +#define __MACH_ZYNQMP_H
> +
> +int zynqmp_soc_revision(void);
> +
> +#endif /* __MACH_ZYNQMP_H */
> diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
> new file mode 100644
> index 000000000000..2b3bd8406ce9
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/zynqmp.c
> @@ -0,0 +1,74 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 Michael Tretter <m.tretter at pengutronix.de>
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <linux/types.h>
> +#include <reset_source.h>
> +
> +#include <mach/zynqmp.h>
> +
> +#define ZYNQMP_CRL_APB_BASE		0xff5e0000
> +#define ZYNQMP_CRL_APB_RESET_REASON	(ZYNQMP_CRL_APB_BASE + 0x220)
> +
> +/* External POR: The PS_POR_B reset signal pin was asserted. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL   BIT(0)
> +/* Internal POR: A system error triggered a POR reset. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_INTERNAL   BIT(1)
> +/* Internal system reset; A system error triggered a system reset. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_PMU        BIT(2)
> +/* PS-only reset: Write to PMU_GLOBAL.GLOBAL_RESET [PS_ONLY_RST]. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_PSONLY     BIT(3)
> +/* External system reset: The PS_SRST_B reset signal pin was asserted. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_SRST       BIT(4)
> +/* Software system reset: Write to RESET_CTRL [soft_reset]. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_SOFT       BIT(5)
> +/* Software debugger reset: Write to BLOCKONLY_RST [debug_only]. */
> +#define ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS  BIT(6)
> +
> +struct zynqmp_reset_reason {
> +	u32 mask;
> +	enum reset_src_type type;
> +};
> +
> +static const struct zynqmp_reset_reason reset_reasons[] = {
> +	{ ZYNQMP_CRL_APB_RESET_REASON_DEBUG_SYS,	RESET_UKWN },

RESET_JTAG?

> +	{ ZYNQMP_CRL_APB_RESET_REASON_SOFT,		RESET_RST },
> +	{ ZYNQMP_CRL_APB_RESET_REASON_SRST,		RESET_POR },
> +	{ ZYNQMP_CRL_APB_RESET_REASON_PSONLY,		RESET_POR },
> +	{ ZYNQMP_CRL_APB_RESET_REASON_PMU,		RESET_POR },
> +	{ ZYNQMP_CRL_APB_RESET_REASON_INTERNAL,		RESET_POR },
> +	{ ZYNQMP_CRL_APB_RESET_REASON_EXTERNAL,		RESET_POR },

RESET_EXT?

> +	{ /* sentinel */ }
> +};
> +
> +static enum reset_src_type zynqmp_get_reset_src(void)
> +{
> +	enum reset_src_type type = RESET_UKWN;
> +	unsigned int i;
> +	u32 val;
> +
> +	val = readl(ZYNQMP_CRL_APB_RESET_REASON);
> +
> +	for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
> +		if (val & reset_reasons[i].mask) {
> +			type = reset_reasons[i].type;
> +			break;
> +		}
> +	}
> +
> +	pr_info("ZynqMP reset reason %s (ZYNQMP_CRL_APB_RESET_REASON: 0x%08x)\n",
> +		reset_source_to_string(type), val);
> +
> +	return type;
> +}
> +
> +static int zynqmp_init(void)
> +{
> +	reset_source_set(zynqmp_get_reset_src());
> +
> +	return 0;
> +}
> +postcore_initcall(zynqmp_init);
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |