[PATCH 0/7] ZynqMP: Cleanup and extend board support

[Michael Tretter]

Hello,

There were still a few things missing for real support for the ZynqMP ZCU104
in Barebox.

This series adds support for reset source detection, Barebox environment,
barebox_update and soft reset (via PSCI) for the ZynqMP ZCU104 board. It
extends the zynqmp_defconfig to enable more features that you would probably
want by default on a ZynqMP board. I also added some introductory information
how to build and use Barebox on the ZynqMP.

Michael

Michael Tretter (7):
  ARM: zynqmp: set reset source
  clk: zynqmp: do not enable already enabled clocks
  dts: zcu104: add Barebox environment
  ARM: zynqmp: add update handler
  ARM: zynqmp: zcu104: register update handler
  ARM: zynqmp: defconfig: enable more features
  Documentation: zynqmp: add some documentation

 Documentation/boards/zynqmp.rst               | 40 ++++++++++
 arch/arm/boards/xilinx-zcu104/Makefile        |  1 +
 arch/arm/boards/xilinx-zcu104/board.c         | 18 +++++
 arch/arm/configs/zynqmp_defconfig             | 23 ++++++
 arch/arm/dts/zynqmp-zcu104-revA.dts           | 10 +++
 arch/arm/mach-zynqmp/Makefile                 |  2 +
 .../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++
 arch/arm/mach-zynqmp/include/mach/zynqmp.h    |  6 ++
 arch/arm/mach-zynqmp/zynqmp-bbu.c             | 48 ++++++++++++
 arch/arm/mach-zynqmp/zynqmp.c                 | 74 +++++++++++++++++++
 drivers/clk/zynqmp/clk-gate-zynqmp.c          |  3 +
 11 files changed, 246 insertions(+)
 create mode 100644 Documentation/boards/zynqmp.rst
 create mode 100644 arch/arm/boards/xilinx-zcu104/board.c
 create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
 create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp.h
 create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
 create mode 100644 arch/arm/mach-zynqmp/zynqmp.c

-- 
2.29.2