[PATCH v2 06/29] RISC-V: erizo: make it easier to reuse ns16550 debug_ll

[Ahmad Fatoum]

Incoming StarFive support also uses ns16550 compatibles as UART IP.
Make reuse easier by making the two most likely parameters to change
SoC-specific (base address and baud clock frequency) and move the rest
behind the new CONFIG_DEBUG_LL_NS16550.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 arch/riscv/include/asm/debug_ll.h | 7 +++++--
 common/Kconfig                    | 6 ++++++
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/include/asm/debug_ll.h b/arch/riscv/include/asm/debug_ll.h
index 6904460af98f..13609d25c559 100644
--- a/arch/riscv/include/asm/debug_ll.h
+++ b/arch/riscv/include/asm/debug_ll.h
@@ -12,13 +12,16 @@
 
 #include <linux/kconfig.h>
 
-#ifdef CONFIG_DEBUG_ERIZO
+#ifdef CONFIG_DEBUG_LL_NS16550
 
+#if defined CONFIG_DEBUG_ERIZO
 #define DEBUG_LL_UART_ADDR	0x90000000
+#define DEBUG_LL_UART_CLK       (24000000 / 16)
+#endif
+
 #define DEBUG_LL_UART_SHIFT	2
 #define DEBUG_LL_UART_IOSIZE32
 
-#define DEBUG_LL_UART_CLK       (24000000 / 16)
 #define DEBUG_LL_UART_BPS       CONFIG_BAUDRATE
 #define DEBUG_LL_UART_DIVISOR   (DEBUG_LL_UART_CLK / DEBUG_LL_UART_BPS)
 
diff --git a/common/Kconfig b/common/Kconfig
index 8b8f80bbb3ba..98be9b58abce 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1376,6 +1376,7 @@ config DEBUG_RPI3_MINI_UART
 config DEBUG_ERIZO
 	bool "Erizo ns16550 port"
 	depends on SOC_ERIZO
+	select DEBUG_LL_NS16550
 
 config DEBUG_SIFIVE
 	bool "SiFive serial0 port"
@@ -1383,6 +1384,11 @@ config DEBUG_SIFIVE
 
 endchoice
 
+config DEBUG_LL_NS16550
+	bool
+	help
+	  Selected by RISC-V platforms that use ns16550 for debug_ll
+
 config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
 						DEBUG_IMX21_UART || \
-- 
2.29.2