[PATCH 1/2] usb: imx: fix overcurrent polarity handling on i.MX7

[Sascha Hauer]

On Tue, Feb 02, 2021 at 07:54:12PM +0100, Michael Grzeschik wrote:
> The reference manual says the overcurrent polarity is changed to low
> with the bit set. We fix that according to the description.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> ---
>  drivers/usb/imx/imx-usb-misc.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/drivers/usb/imx/imx-usb-misc.c b/drivers/usb/imx/imx-usb-misc.c
> index b663d073aa..660ebecd78 100644
> --- a/drivers/usb/imx/imx-usb-misc.c
> +++ b/drivers/usb/imx/imx-usb-misc.c
> @@ -353,7 +353,7 @@ static __maybe_unused struct imx_usb_misc_data mx5_data = {
>  
>  #define MX6_USB_CTRL(n)			((n) * 4)
>  #define MX6_USB_CTRL_OVER_CUR_DIS	(1 << 7)
> -#define MX6_USB_CTRL_OVER_CUR_ACT_HIGH	(1 << 8)
> +#define MX6_USB_CTRL_OVER_CUR_ACT_LOW	(1 << 8)
>  #define MX6_USB_CTRL_PWR_POLARITY	(1 << 9)
>  
>  static void mx6_hsic_pullup(unsigned long reg, int on)
> @@ -453,9 +453,9 @@ static int usbmisc_imx7d_init(void __iomem *base, int port,
>  	} else {
>  		reg &= ~MX6_USB_CTRL_OVER_CUR_DIS;
>  		if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
> -			reg &= ~MX6_USB_CTRL_OVER_CUR_ACT_HIGH;
> +			reg |= MX6_USB_CTRL_OVER_CUR_ACT_LOW;
>  		else
> -			reg |= MX6_USB_CTRL_OVER_CUR_ACT_HIGH;
> +			reg &= ~MX6_USB_CTRL_OVER_CUR_ACT_LOW;
>  	}
>  	if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
>  		reg |= MX6_USB_CTRL_PWR_POLARITY;
> -- 
> 2.30.0
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |