[PATCH v2 1/3] firmware: zynqmp-fpga: initialize flags at function start

[Michael Tretter]

The ZYNQMP_FPGA_BIT_ONLY_BIN flag is always set when programming the
FPGA. Simplify the code by initializing the flags with
ZYNQMP_FPGA_BIT_ONLY_BIN already set.

Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
---
 drivers/firmware/zynqmp-fpga.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/firmware/zynqmp-fpga.c b/drivers/firmware/zynqmp-fpga.c
index 0fc229bfd3dd..736d1950fa5e 100644
--- a/drivers/firmware/zynqmp-fpga.c
+++ b/drivers/firmware/zynqmp-fpga.c
@@ -205,7 +205,7 @@ static int fpgamgr_program_finish(struct firmware_handler *fh)
 	enum xilinx_byte_order byte_order;
 	u64 addr;
 	int status = 0;
-	u8 flags = 0;
+	u8 flags = ZYNQMP_FPGA_BIT_ONLY_BIN;
 
 	if (!mgr->buf) {
 		status = -ENOBUFS;
@@ -259,9 +259,6 @@ static int fpgamgr_program_finish(struct firmware_handler *fh)
 
 	addr = (u64)buf_aligned;
 
-	/* we do not provide a header */
-	flags |= ZYNQMP_FPGA_BIT_ONLY_BIN;
-
 	if (!(mgr->features & ZYNQMP_PM_FEATURE_SIZE_NOT_NEEDED) && buf_size) {
 		status = mgr->eemi_ops->fpga_load(addr,
 				(u32)(uintptr_t)buf_size,
-- 
2.30.2