[PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon
Ahmad Fatoum
a.fatoum at pengutronix.de
Wed Aug 11 01:52:53 PDT 2021
Hello Antony,
On 25.05.21 09:19, Antony Pavlov wrote:
> Changes since v2:
>
> * rebase on top of master branch (f873c7ff2497) +
> "RISC-V: extend multi-image to support both S- and M-Mode"
> (http://lists.infradead.org/pipermail/barebox/2021-May/036086.html).
> * "litex serial: add setbrg callback" patch by Marek Czerski is added
> for review;
> * fix "clocksource: timer-riscv: select CSR from device tree" patch;
> * change gpio IP-block base addresses in litex dts;
> * gpio-74xx-mmio uses device_get_match_data() now.
>
> Changes since v1:
>
> * rebased on top of next branch;
> * new patches are introduced:
> * clocksource: timer-riscv: select CSR from device tree
> * RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
> * RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n
> * almost all of Ahmad's notes are fixed (e.g. unused header files inclusions are dropped);
> * NOT FIXED: gpio-74xx-mmio still uses dev_get_drvdata(), not device_get_match_data()
>
> Antony Pavlov (9):
> clocksource: timer-riscv: select CSR from device tree
> RISC-V: make it possible to run nmon from PBL C code
> RISC-V: boards: erizo: make it possible to use nmon
> serial: add litex UART driver
> gpio: add driver for 74xx-ICs with MMIO access
> spi: add litex spiflash driver
> net: add LiteEth driver
> RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
> RISC-V: add litex_linux_defconfig
>
> Marek Czerski (1):
> litex serial: add setbrg callback
I'd like to give this a try eventually while following:
https://github.com/enjoy-digital/litex/wiki/Use-LiteX-on-the-Acorn-CLE-215
Do you intend to submit a new revision soon? Is it ok for you if I respin
this series?
Cheers,
Ahmad
> arch/riscv/Kconfig.socs | 14 +
> arch/riscv/boards/Makefile | 1 +
> arch/riscv/boards/erizo/lowlevel.c | 4 +
> arch/riscv/boards/litex-linux/Makefile | 3 +
> arch/riscv/boards/litex-linux/lowlevel.c | 22 ++
> arch/riscv/boot/Makefile | 1 +
> arch/riscv/boot/nmon_entry.S | 13 +
> arch/riscv/configs/litex_linux_defconfig | 76 +++++
> arch/riscv/dts/Makefile | 1 +
> arch/riscv/dts/erizo.dtsi | 2 +
> arch/riscv/dts/litex-linux.dts | 92 ++++++
> arch/riscv/dts/litex_soc_linux.dtsi | 49 +++
> arch/riscv/include/asm/debug_ll.h | 3 +
> arch/riscv/include/asm/debug_ll_litex.h | 123 ++++++++
> arch/riscv/include/asm/riscv_nmon.h | 49 ++-
> common/Kconfig | 4 +
> drivers/clocksource/timer-riscv.c | 24 +-
> drivers/gpio/Kconfig | 14 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-74xx-mmio.c | 165 ++++++++++
> drivers/net/Kconfig | 8 +
> drivers/net/Makefile | 1 +
> drivers/net/liteeth.c | 376 +++++++++++++++++++++++
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_litex.c | 103 +++++++
> drivers/spi/Kconfig | 3 +
> drivers/spi/Makefile | 1 +
> drivers/spi/litex_spiflash.c | 241 +++++++++++++++
> images/Makefile.riscv | 4 +
> 29 files changed, 1370 insertions(+), 29 deletions(-)
> create mode 100644 arch/riscv/boards/litex-linux/Makefile
> create mode 100644 arch/riscv/boards/litex-linux/lowlevel.c
> create mode 100644 arch/riscv/boot/nmon_entry.S
> create mode 100644 arch/riscv/configs/litex_linux_defconfig
> create mode 100644 arch/riscv/dts/litex-linux.dts
> create mode 100644 arch/riscv/dts/litex_soc_linux.dtsi
> create mode 100644 arch/riscv/include/asm/debug_ll_litex.h
> create mode 100644 drivers/gpio/gpio-74xx-mmio.c
> create mode 100644 drivers/net/liteeth.c
> create mode 100644 drivers/serial/serial_litex.c
> create mode 100644 drivers/spi/litex_spiflash.c
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list