[PATCH 04/18] ARM: mx6-sabrelite: remove obsolete sabrelite_mem_init()

[Marco Felsch]

The memory init is done by of_probe_memory() first which is part of the
core_initcall's because the device tree has an valid memory node.
Otherwise the memory-controller driver (esdctl) would add it by reading
the information from the controller which are set by the DCD data.
Therefore we can drop it from the local board file.

Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
 arch/arm/boards/freescale-mx6-sabrelite/board.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c
index 020a44297a..1b39ef82c6 100644
--- a/arch/arm/boards/freescale-mx6-sabrelite/board.c
+++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c
@@ -39,18 +39,6 @@ static iomux_v3_cfg_t sabrelite_enet_gpio_pads[] = {
 	MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24,
 };
 
-static int sabrelite_mem_init(void)
-{
-	if (!of_machine_is_compatible("fsl,imx6q-sabrelite") &&
-	    !of_machine_is_compatible("fsl,imx6dl-sabrelite"))
-		return 0;
-
-	arm_add_mem_device("ram0", 0x10000000, SZ_1G);
-
-	return 0;
-}
-mem_initcall(sabrelite_mem_init);
-
 static int ksz9021rn_phy_fixup(struct phy_device *dev)
 {
 	phy_write(dev, 0x09, 0x0f00);
-- 
2.20.1