[PATCH 06/10] ARM: dts: stm32mp: setup syscon-reboot-mode on TAMP general purpose register

[Ahmad Fatoum]

With the reboot mode infrastructure in place, lets add the first in-tree
user. The STM32MP1 SoCs have general purpose registers in the TAMP
peripheral. Register 20 there is used by the vendor's U-Boot for storing
a forced boot mode. We will use the same location for our reboot mode.
Consistency between barebox and OS is maintained by having barebox fixup
the device tree with the same reboot mode information it used itself, so
we are free to choose our own mode identifiers.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 arch/arm/dts/stm32mp151.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 5ff3b96fae4a..9638e972264a 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -28,6 +28,7 @@
 		pwm15 = &{/soc/timer at 44006000/pwm};
 		pwm16 = &{/soc/timer at 44007000/pwm};
 		pwm17 = &{/soc/timer at 44008000/pwm};
+		tamp.reboot_mode = &reboot_mode_tamp;
 	};
 
 };
@@ -46,6 +47,20 @@
 		compatible = "st,stm32mp1-ddr";
 		reg = <0x5a003000 0x1000>;
 	};
+
+	tamp at 5c00a000 {
+		compatible = "simple-bus", "syscon", "simple-mfd";
+		reg = <0x5c00a000 0x400>;
+
+		reboot_mode_tamp: reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x150>; /* reg20 */
+			mask = <0xff>;
+			mode-normal = <0>;
+			mode-loader = <0xBB>;
+			mode-recovery = <0xBC>;
+		};
+	};
 };
 
 &bsec {
-- 
2.28.0