[PATCH] console: add new write-only option
Ahmad Fatoum
a.fatoum at pengutronix.de
Tue Oct 13 05:17:20 EDT 2020
On 10/13/20 10:41 AM, Ahmad Fatoum wrote:
> Hello,
>
> On 10/13/20 9:59 AM, Rouven Czerwinski wrote:
>> Add CONFIG_CONSOLE_WRITEONLY to configure the consoles as write-only,
>> making the bootup effectively non-interactive.
>>
>> Signed-off-by: Rouven Czerwinski <r.czerwinski at pengutronix.de>
>> ---
>> common/Kconfig | 11 +++++++++++
>> common/console.c | 2 +-
>> common/console_simple.c | 5 ++++-
>> common/startup.c | 5 +++++
>> 4 files changed, 21 insertions(+), 2 deletions(-)
>>
>> diff --git a/common/Kconfig b/common/Kconfig
>> index 1a5bb53182..abf9b7bd73 100644
>> --- a/common/Kconfig
>> +++ b/common/Kconfig
>> @@ -775,6 +775,17 @@ config CONSOLE_ALLOW_COLOR
>> compile time default for colored console output. After boot it
>> can be controlled using global.allow_color.
>>
>> +config CONSOLE_WRITEONLY
>> + prompt "Enable writeonly consoles (non-interactive)"
>> + depends on CONSOLE_FULL || CONSOLE_SIMPLE
>> + bool
>> + help
>> + If enabled, all consoles are configured to be write-only, meaning
>> + they will not read any input, making the console effectively
>> + non-interactive.
>> + CAUTION: this will also disable input devices, since they are registered as
>> + consoles.
>
> Did you consider having a serialX.input device parameter instead?
Oh, we already have serialN.active, which can be set selectively
configured to enable/disable input. Would be great if this still
can be used on top of this new Kconfig option to selectively enable.
> That way you can still:
>
> - Enable some input devices selectively (e.g. reset and power specialkeys)
> - System still has a recovery mode that can be entered if Linux
> writes a value to a SoC-internal register (reboot mode)
> - have non-user-facing consoles (remoteproc with co-processor in future)
For those to work, you could do
+active_flags = CONSOLE_STDOUT | CONSOLE_STDERR;
+if (!IS_ENABLED(CONFIG_CONSOLE_WRITEONLY))
+ active_flags |= CONSOLE_STDIN;
if (activate)
- console_set_active(newcdev, CONSOLE_STDIN |
- CONSOLE_STDOUT | CONSOLE_STDERR);
+ console_set_active(newcdev, flags);
Does this work for you?
>
> Cheers
> Ahmad
>
>> +
>> config PBL_CONSOLE
>> depends on PBL_IMAGE
>> depends on !CONSOLE_NONE
>> diff --git a/common/console.c b/common/console.c
>> index 3375ecb7e5..fb26886f8c 100644
>> --- a/common/console.c
>> +++ b/common/console.c
>> @@ -93,7 +93,7 @@ int console_set_active(struct console_device *cdev, unsigned flag)
>> {
>> int ret;
>>
>> - if (!cdev->getc)
>> + if (!cdev->getc || IS_ENABLED(CONFIG_CONSOLE_WRITEONLY))
>> flag &= ~CONSOLE_STDIN;
>> if (!cdev->putc)
>> flag &= ~(CONSOLE_STDOUT | CONSOLE_STDERR);
>> diff --git a/common/console_simple.c b/common/console_simple.c
>> index 42224842c5..75257c7b08 100644
>> --- a/common/console_simple.c
>> +++ b/common/console_simple.c
>> @@ -92,7 +92,10 @@ int console_register(struct console_device *newcdev)
>> newcdev->setbrg(newcdev, newcdev->baudrate);
>> }
>>
>> - newcdev->f_active = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
>> + if (IS_ENABLED(CONFIG_CONSOLE_WRITEONLY))
>> + newcdev->f_active = CONSOLE_STDOUT | CONSOLE_STDERR;
>> + else
>> + newcdev->f_active = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
>>
>> barebox_banner();
>>
>> diff --git a/common/startup.c b/common/startup.c
>> index ea7ce6b8da..d7bf99df14 100644
>> --- a/common/startup.c
>> +++ b/common/startup.c
>> @@ -253,6 +253,11 @@ enum autoboot_state do_autoboot_countdown(void)
>>
>> menu_exists = stat(MENUFILE, &s) == 0;
>>
>> + if (IS_ENABLED(CONFIG_CONSOLE_WRITEONLY)) {
>> + printf("\nNon-interactive console, booting system\n");
>> + return autoboot_state = AUTOBOOT_BOOT;
>> + }
>> +
>> if (menu_exists) {
>> printf("\nHit m for menu or %s to stop autoboot: ",
>> global_autoboot_abort_keys[global_autoboot_abort_key]);
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list