[PATCH v2 12/12] sandbox: defconfig: enable new generic features
Ahmad Fatoum
a.fatoum at pengutronix.de
Mon Oct 12 02:26:19 EDT 2020
Recent commits have modified sandbox for easier support of many common
features:
- block devices
- watchdogs
- reset source
- reboot mode
- barebox state
Enable those in defconfig along with some other useful options.
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
v1 -> v2: no changes
---
arch/sandbox/configs/sandbox_defconfig | 45 ++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)
diff --git a/arch/sandbox/configs/sandbox_defconfig b/arch/sandbox/configs/sandbox_defconfig
index c343f053faff..ca24d81acac7 100644
--- a/arch/sandbox/configs/sandbox_defconfig
+++ b/arch/sandbox/configs/sandbox_defconfig
@@ -2,20 +2,34 @@ CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
+CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK_EFI=y
CONFIG_DEFAULT_COMPRESSION_GZIP=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_REBOOT_MODE=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/sandbox/board/env"
+CONFIG_STATE=y
+CONFIG_STATE_CRYPTO=y
+CONFIG_RESET_SOURCE=y
CONFIG_CMD_DMESG=y
CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
CONFIG_CMD_IMD=y
CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTM is not set
+CONFIG_CMD_POLLER=y
+CONFIG_CMD_SLICE=y
CONFIG_CMD_GO=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_LOADS=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_SAVES=y
CONFIG_CMD_UIMAGE=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_EXPORT=y
CONFIG_CMD_DEFAULTENV=y
+CONFIG_CMD_LOADENV=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
@@ -39,14 +53,18 @@ CONFIG_CMD_PING=y
CONFIG_CMD_TFTP=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_EDIT=y
+CONFIG_CMD_LOGIN=y
CONFIG_CMD_MENU=y
CONFIG_CMD_MENU_MANAGEMENT=y
CONFIG_CMD_MENUTREE=y
+CONFIG_CMD_PASSWD=y
CONFIG_CMD_SPLASH=y
+CONFIG_CMD_FBTEST=y
CONFIG_CMD_READLINE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_CRC=y
CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MM=y
CONFIG_CMD_DETECT=y
CONFIG_CMD_FLASH=y
@@ -56,18 +74,31 @@ CONFIG_CMD_LED=y
CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_WD=y
CONFIG_CMD_2048=y
+CONFIG_CMD_KEYSTORE=y
+CONFIG_CMD_LINUX_EXEC=y
+CONFIG_CMD_OF_DIFF=y
CONFIG_CMD_OF_NODE=y
CONFIG_CMD_OF_PROPERTY=y
CONFIG_CMD_OF_DISPLAY_TIMINGS=y
+CONFIG_CMD_OF_FIXUP_STATUS=y
+CONFIG_CMD_OF_OVERLAY=y
CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIME=y
+CONFIG_CMD_STATE=y
+CONFIG_CMD_DHRYSTONE=y
CONFIG_CMD_SPD_DECODE=y
+CONFIG_CMD_SEED=y
CONFIG_NET=y
CONFIG_NET_NFS=y
CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_SNTP=y
+CONFIG_NET_FASTBOOT=y
CONFIG_OFDEVICE=y
CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_OF_BAREBOX_ENV_IN_FS=y
+CONFIG_OF_OVERLAY_LIVE=y
CONFIG_DRIVER_NET_TAP=y
CONFIG_DRIVER_SPI_GPIO=y
CONFIG_I2C=y
@@ -76,6 +107,9 @@ CONFIG_MTD=y
CONFIG_MTD_M25P80=y
CONFIG_VIDEO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_STATE_DRV=y
+CONFIG_UBOOTVAR=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_LED_GPIO_OF=y
@@ -84,9 +118,12 @@ CONFIG_LED_GPIO_BICOLOR=y
CONFIG_LED_TRIGGERS=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_AT24=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_POLLER=y
# CONFIG_PINCTRL is not set
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
+CONFIG_SYSCON_REBOOT_MODE=y
CONFIG_FS_CRAMFS=y
CONFIG_FS_EXT4=y
CONFIG_FS_TFTP=y
@@ -94,12 +131,17 @@ CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
CONFIG_FS_FAT_LFN=y
+CONFIG_FS_JFFS2=y
CONFIG_FS_BPKFS=y
CONFIG_FS_UIMAGEFS=y
+CONFIG_FS_PSTORE=y
+CONFIG_FS_PSTORE_CONSOLE=y
CONFIG_FS_SQUASHFS=y
+CONFIG_FS_UBOOTVARFS=y
CONFIG_BZLIB=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DECOMPRESS=y
+CONFIG_BASE64=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_BMP=y
CONFIG_PNG=y
@@ -112,4 +154,3 @@ CONFIG_BAREBOX_LOGO_240=y
CONFIG_BAREBOX_LOGO_320=y
CONFIG_BAREBOX_LOGO_400=y
CONFIG_BAREBOX_LOGO_640=y
-CONFIG_DIGEST_HMAC_GENERIC=y
--
2.28.0
More information about the barebox
mailing list