[PATCH] ARM: phytec-som-imx6: fix build dependency

[Sascha Hauer]

On Thu, Oct 01, 2020 at 06:02:25PM +0200, Marco Felsch wrote:
> Enable i2c support since the board code configures the i2c connected
> PMIC.
> 
> Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
> ---
>  arch/arm/mach-imx/Kconfig | 2 ++
>  1 file changed, 2 insertions(+)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 2e8d2bd56c..a67e59fd4f 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -339,6 +339,8 @@ config MACH_PHYTEC_SOM_IMX6
>          bool "Phytec phyCARD-i.MX6 and phyFLEX-i.MX6"
>          select ARCH_IMX6
>  	select ARCH_IMX6UL
> +	select I2C
> +	select I2C_IMX
>  
>  config MACH_PROTONIC_IMX6
>  	bool "Protonic-Holland i.MX6 based boards"
> -- 
> 2.20.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |