[PATCH] clk: imx6: demote warning about ldb_di_clk reparenting

[Ahmad Fatoum]

Linux logging this is justified, because it alerts to problems in the
boot firmware. barebox warning about it serves no real purpose other
than indicating that barebox was chainloaded. Make it a debug log
to not clutter the log.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 drivers/clk/imx/clk-imx6.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6.c b/drivers/clk/imx/clk-imx6.c
index cb030244581a..6935a8e85292 100644
--- a/drivers/clk/imx/clk-imx6.c
+++ b/drivers/clk/imx/clk-imx6.c
@@ -482,9 +482,9 @@ static void init_ldb_clks(struct device_node *np, void __iomem *ccm_base)
 	of_assigned_ldb_sels(np, &sel[0][3], &sel[1][3]);
 
 	for (i = 0; i < 2; i++) {
-		/* Warn if a glitch might have been introduced already */
+		/* log if a glitch might have been introduced already */
 		if (sel[i][0] != LDB_DI_SEL_MMDC_CH1_AXI) {
-			pr_warn("ccm: ldb_di%d_sel already changed from reset value: %d\n",
+			pr_debug("ccm: ldb_di%d_sel already changed from reset value: %d\n",
 				i, sel[i][0]);
 		}
 
-- 
2.28.0